1 /** 2 ****************************************************************************** 3 * @file stm32f0xx_hal_gpio.h 4 * @author MCD Application Team 5 * @brief Header file of GPIO HAL module. 6 ****************************************************************************** 7 * @attention 8 * 9 * Copyright (c) 2016 STMicroelectronics. 10 * All rights reserved. 11 * 12 * This software is licensed under terms that can be found in the LICENSE file 13 * in the root directory of this software component. 14 * If no LICENSE file comes with this software, it is provided AS-IS. 15 * 16 ****************************************************************************** 17 */ 18 19 /* Define to prevent recursive inclusion -------------------------------------*/ 20 #ifndef __STM32F0xx_HAL_GPIO_H 21 #define __STM32F0xx_HAL_GPIO_H 22 23 #ifdef __cplusplus 24 extern "C" { 25 #endif 26 27 /* Includes ------------------------------------------------------------------*/ 28 #include "stm32f0xx_hal_def.h" 29 30 /** @addtogroup STM32F0xx_HAL_Driver 31 * @{ 32 */ 33 34 /** @addtogroup GPIO 35 * @{ 36 */ 37 38 /* Exported types ------------------------------------------------------------*/ 39 40 /** @defgroup GPIO_Exported_Types GPIO Exported Types 41 * @{ 42 */ 43 /** 44 * @brief GPIO Init structure definition 45 */ 46 typedef struct 47 { 48 uint32_t Pin; /*!< Specifies the GPIO pins to be configured. 49 This parameter can be any value of @ref GPIO_pins */ 50 51 uint32_t Mode; /*!< Specifies the operating mode for the selected pins. 52 This parameter can be a value of @ref GPIO_mode */ 53 54 uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. 55 This parameter can be a value of @ref GPIO_pull */ 56 57 uint32_t Speed; /*!< Specifies the speed for the selected pins. 58 This parameter can be a value of @ref GPIO_speed */ 59 60 uint32_t Alternate; /*!< Peripheral to be connected to the selected pins 61 This parameter can be a value of @ref GPIOEx_Alternate_function_selection */ 62 }GPIO_InitTypeDef; 63 64 /** 65 * @brief GPIO Bit SET and Bit RESET enumeration 66 */ 67 typedef enum 68 { 69 GPIO_PIN_RESET = 0U, 70 GPIO_PIN_SET 71 }GPIO_PinState; 72 /** 73 * @} 74 */ 75 76 /* Exported constants --------------------------------------------------------*/ 77 /** @defgroup GPIO_Exported_Constants GPIO Exported Constants 78 * @{ 79 */ 80 /** @defgroup GPIO_pins GPIO pins 81 * @{ 82 */ 83 #define GPIO_PIN_0 ((uint16_t)0x0001U) /* Pin 0 selected */ 84 #define GPIO_PIN_1 ((uint16_t)0x0002U) /* Pin 1 selected */ 85 #define GPIO_PIN_2 ((uint16_t)0x0004U) /* Pin 2 selected */ 86 #define GPIO_PIN_3 ((uint16_t)0x0008U) /* Pin 3 selected */ 87 #define GPIO_PIN_4 ((uint16_t)0x0010U) /* Pin 4 selected */ 88 #define GPIO_PIN_5 ((uint16_t)0x0020U) /* Pin 5 selected */ 89 #define GPIO_PIN_6 ((uint16_t)0x0040U) /* Pin 6 selected */ 90 #define GPIO_PIN_7 ((uint16_t)0x0080U) /* Pin 7 selected */ 91 #define GPIO_PIN_8 ((uint16_t)0x0100U) /* Pin 8 selected */ 92 #define GPIO_PIN_9 ((uint16_t)0x0200U) /* Pin 9 selected */ 93 #define GPIO_PIN_10 ((uint16_t)0x0400U) /* Pin 10 selected */ 94 #define GPIO_PIN_11 ((uint16_t)0x0800U) /* Pin 11 selected */ 95 #define GPIO_PIN_12 ((uint16_t)0x1000U) /* Pin 12 selected */ 96 #define GPIO_PIN_13 ((uint16_t)0x2000U) /* Pin 13 selected */ 97 #define GPIO_PIN_14 ((uint16_t)0x4000U) /* Pin 14 selected */ 98 #define GPIO_PIN_15 ((uint16_t)0x8000U) /* Pin 15 selected */ 99 #define GPIO_PIN_All ((uint16_t)0xFFFFU) /* All pins selected */ 100 101 #define GPIO_PIN_MASK (0x0000FFFFU) /* PIN mask for assert test */ 102 /** 103 * @} 104 */ 105 106 /** @defgroup GPIO_mode GPIO mode 107 * @brief GPIO Configuration Mode 108 * Elements values convention: 0x00WX00YZ 109 * - W : EXTI trigger detection on 3 bits 110 * - X : EXTI mode (IT or Event) on 2 bits 111 * - Y : Output type (Push Pull or Open Drain) on 1 bit 112 * - Z : GPIO mode (Input, Output, Alternate or Analog) on 2 bits 113 * @{ 114 */ 115 #define GPIO_MODE_INPUT MODE_INPUT /*!< Input Floating Mode */ 116 #define GPIO_MODE_OUTPUT_PP (MODE_OUTPUT | OUTPUT_PP) /*!< Output Push Pull Mode */ 117 #define GPIO_MODE_OUTPUT_OD (MODE_OUTPUT | OUTPUT_OD) /*!< Output Open Drain Mode */ 118 #define GPIO_MODE_AF_PP (MODE_AF | OUTPUT_PP) /*!< Alternate Function Push Pull Mode */ 119 #define GPIO_MODE_AF_OD (MODE_AF | OUTPUT_OD) /*!< Alternate Function Open Drain Mode */ 120 121 #define GPIO_MODE_ANALOG MODE_ANALOG /*!< Analog Mode */ 122 123 #define GPIO_MODE_IT_RISING (MODE_INPUT | EXTI_IT | TRIGGER_RISING) /*!< External Interrupt Mode with Rising edge trigger detection */ 124 #define GPIO_MODE_IT_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_FALLING) /*!< External Interrupt Mode with Falling edge trigger detection */ 125 #define GPIO_MODE_IT_RISING_FALLING (MODE_INPUT | EXTI_IT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ 126 127 #define GPIO_MODE_EVT_RISING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING) /*!< External Event Mode with Rising edge trigger detection */ 128 #define GPIO_MODE_EVT_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_FALLING) /*!< External Event Mode with Falling edge trigger detection */ 129 #define GPIO_MODE_EVT_RISING_FALLING (MODE_INPUT | EXTI_EVT | TRIGGER_RISING | TRIGGER_FALLING) /*!< External Event Mode with Rising/Falling edge trigger detection *//** 130 * @} 131 */ 132 133 /** @defgroup GPIO_speed GPIO speed 134 * @brief GPIO Output Maximum frequency 135 * @{ 136 */ 137 #define GPIO_SPEED_FREQ_LOW (0x00000000U) /*!< range up to 2 MHz, please refer to the product datasheet */ 138 #define GPIO_SPEED_FREQ_MEDIUM (0x00000001U) /*!< range 4 MHz to 10 MHz, please refer to the product datasheet */ 139 #define GPIO_SPEED_FREQ_HIGH (0x00000003U) /*!< range 10 MHz to 50 MHz, please refer to the product datasheet */ 140 /** 141 * @} 142 */ 143 144 /** @defgroup GPIO_pull GPIO pull 145 * @brief GPIO Pull-Up or Pull-Down Activation 146 * @{ 147 */ 148 #define GPIO_NOPULL (0x00000000U) /*!< No Pull-up or Pull-down activation */ 149 #define GPIO_PULLUP (0x00000001U) /*!< Pull-up activation */ 150 #define GPIO_PULLDOWN (0x00000002U) /*!< Pull-down activation */ 151 /** 152 * @} 153 */ 154 155 /** 156 * @} 157 */ 158 159 /* Exported macro ------------------------------------------------------------*/ 160 /** @defgroup GPIO_Exported_Macros GPIO Exported Macros 161 * @{ 162 */ 163 164 /** 165 * @brief Check whether the specified EXTI line flag is set or not. 166 * @param __EXTI_LINE__ specifies the EXTI line flag to check. 167 * This parameter can be GPIO_PIN_x where x can be(0..15) 168 * @retval The new state of __EXTI_LINE__ (SET or RESET). 169 */ 170 #define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) 171 172 /** 173 * @brief Clear the EXTI's line pending flags. 174 * @param __EXTI_LINE__ specifies the EXTI lines flags to clear. 175 * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) 176 * @retval None 177 */ 178 #define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) 179 180 /** 181 * @brief Check whether the specified EXTI line is asserted or not. 182 * @param __EXTI_LINE__ specifies the EXTI line to check. 183 * This parameter can be GPIO_PIN_x where x can be(0..15) 184 * @retval The new state of __EXTI_LINE__ (SET or RESET). 185 */ 186 #define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) 187 188 /** 189 * @brief Clear the EXTI's line pending bits. 190 * @param __EXTI_LINE__ specifies the EXTI lines to clear. 191 * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) 192 * @retval None 193 */ 194 #define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) 195 196 /** 197 * @brief Generate a Software interrupt on selected EXTI line. 198 * @param __EXTI_LINE__ specifies the EXTI line to check. 199 * This parameter can be GPIO_PIN_x where x can be(0..15) 200 * @retval None 201 */ 202 #define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__)) 203 204 /** 205 * @} 206 */ 207 208 /* Private macros ------------------------------------------------------------*/ 209 /** @defgroup GPIO_Private_Constants GPIO Private Constants 210 * @{ 211 */ 212 #define GPIO_MODE_Pos 0U 213 #define GPIO_MODE (0x3UL << GPIO_MODE_Pos) 214 #define MODE_INPUT (0x0UL << GPIO_MODE_Pos) 215 #define MODE_OUTPUT (0x1UL << GPIO_MODE_Pos) 216 #define MODE_AF (0x2UL << GPIO_MODE_Pos) 217 #define MODE_ANALOG (0x3UL << GPIO_MODE_Pos) 218 #define OUTPUT_TYPE_Pos 4U 219 #define OUTPUT_TYPE (0x1UL << OUTPUT_TYPE_Pos) 220 #define OUTPUT_PP (0x0UL << OUTPUT_TYPE_Pos) 221 #define OUTPUT_OD (0x1UL << OUTPUT_TYPE_Pos) 222 #define EXTI_MODE_Pos 16U 223 #define EXTI_MODE (0x3UL << EXTI_MODE_Pos) 224 #define EXTI_IT (0x1UL << EXTI_MODE_Pos) 225 #define EXTI_EVT (0x2UL << EXTI_MODE_Pos) 226 #define TRIGGER_MODE_Pos 20U 227 #define TRIGGER_MODE (0x7UL << TRIGGER_MODE_Pos) 228 #define TRIGGER_RISING (0x1UL << TRIGGER_MODE_Pos) 229 #define TRIGGER_FALLING (0x2UL << TRIGGER_MODE_Pos) 230 /** 231 * @} 232 */ 233 234 /** @addtogroup GPIO_Private_Macros GPIO Private Macros 235 * @{ 236 */ 237 #define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) 238 239 #define IS_GPIO_PIN(__PIN__) (((((uint32_t)__PIN__) & GPIO_PIN_MASK) != 0x00U) &&\ 240 ((((uint32_t)__PIN__) & ~GPIO_PIN_MASK) == 0x00U)) 241 242 #define IS_GPIO_MODE(__MODE__) (((__MODE__) == GPIO_MODE_INPUT) ||\ 243 ((__MODE__) == GPIO_MODE_OUTPUT_PP) ||\ 244 ((__MODE__) == GPIO_MODE_OUTPUT_OD) ||\ 245 ((__MODE__) == GPIO_MODE_AF_PP) ||\ 246 ((__MODE__) == GPIO_MODE_AF_OD) ||\ 247 ((__MODE__) == GPIO_MODE_IT_RISING) ||\ 248 ((__MODE__) == GPIO_MODE_IT_FALLING) ||\ 249 ((__MODE__) == GPIO_MODE_IT_RISING_FALLING) ||\ 250 ((__MODE__) == GPIO_MODE_EVT_RISING) ||\ 251 ((__MODE__) == GPIO_MODE_EVT_FALLING) ||\ 252 ((__MODE__) == GPIO_MODE_EVT_RISING_FALLING) ||\ 253 ((__MODE__) == GPIO_MODE_ANALOG)) 254 255 #define IS_GPIO_SPEED(__SPEED__) (((__SPEED__) == GPIO_SPEED_FREQ_LOW) ||\ 256 ((__SPEED__) == GPIO_SPEED_FREQ_MEDIUM) ||\ 257 ((__SPEED__) == GPIO_SPEED_FREQ_HIGH)) 258 259 #define IS_GPIO_PULL(__PULL__) (((__PULL__) == GPIO_NOPULL) ||\ 260 ((__PULL__) == GPIO_PULLUP) || \ 261 ((__PULL__) == GPIO_PULLDOWN)) 262 /** 263 * @} 264 */ 265 266 /* Include GPIO HAL Extended module */ 267 #include "stm32f0xx_hal_gpio_ex.h" 268 269 /* Exported functions --------------------------------------------------------*/ 270 /** @addtogroup GPIO_Exported_Functions GPIO Exported Functions 271 * @{ 272 */ 273 274 /** @addtogroup GPIO_Exported_Functions_Group1 Initialization/de-initialization functions 275 * @brief Initialization and Configuration functions 276 * @{ 277 */ 278 279 /* Initialization and de-initialization functions *****************************/ 280 void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); 281 void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); 282 283 /** 284 * @} 285 */ 286 287 /** @addtogroup GPIO_Exported_Functions_Group2 IO operation functions 288 * @{ 289 */ 290 291 /* IO operation functions *****************************************************/ 292 GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); 293 void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); 294 void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); 295 HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); 296 void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); 297 void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); 298 299 /** 300 * @} 301 */ 302 303 /** 304 * @} 305 */ 306 307 /** 308 * @} 309 */ 310 311 /** 312 * @} 313 */ 314 315 #ifdef __cplusplus 316 } 317 #endif 318 319 #endif /* __STM32F0xx_HAL_GPIO_H */ 320 321
