1 /**
2   ******************************************************************************
3   * @file    stm32f0xx_hal_can.h
4   * @author  MCD Application Team
5   * @brief   Header file of CAN HAL module.
6   ******************************************************************************
7   * @attention
8   *
9   * Copyright (c) 2016 STMicroelectronics.
10   * All rights reserved.
11   *
12   * This software is licensed under terms that can be found in the LICENSE file
13   * in the root directory of this software component.
14   * If no LICENSE file comes with this software, it is provided AS-IS.
15   *
16   ******************************************************************************
17   */
18 
19 /* Define to prevent recursive inclusion -------------------------------------*/
20 #ifndef STM32F0xx_HAL_CAN_H
21 #define STM32F0xx_HAL_CAN_H
22 
23 #ifdef __cplusplus
24 extern "C" {
25 #endif
26 
27 /* Includes ------------------------------------------------------------------*/
28 #include "stm32f0xx_hal_def.h"
29 
30 /** @addtogroup STM32F0xx_HAL_Driver
31   * @{
32   */
33 
34 #if defined (CAN)
35 /** @addtogroup CAN
36   * @{
37   */
38 
39 /* Exported types ------------------------------------------------------------*/
40 /** @defgroup CAN_Exported_Types CAN Exported Types
41   * @{
42   */
43 /**
44   * @brief  HAL State structures definition
45   */
46 typedef enum
47 {
48   HAL_CAN_STATE_RESET             = 0x00U,  /*!< CAN not yet initialized or disabled */
49   HAL_CAN_STATE_READY             = 0x01U,  /*!< CAN initialized and ready for use   */
50   HAL_CAN_STATE_LISTENING         = 0x02U,  /*!< CAN receive process is ongoing      */
51   HAL_CAN_STATE_SLEEP_PENDING     = 0x03U,  /*!< CAN sleep request is pending        */
52   HAL_CAN_STATE_SLEEP_ACTIVE      = 0x04U,  /*!< CAN sleep mode is active            */
53   HAL_CAN_STATE_ERROR             = 0x05U   /*!< CAN error state                     */
54 
55 } HAL_CAN_StateTypeDef;
56 
57 /**
58   * @brief  CAN init structure definition
59   */
60 typedef struct
61 {
62   uint32_t Prescaler;                  /*!< Specifies the length of a time quantum.
63                                             This parameter must be a number between Min_Data = 1 and Max_Data = 1024. */
64 
65   uint32_t Mode;                       /*!< Specifies the CAN operating mode.
66                                             This parameter can be a value of @ref CAN_operating_mode */
67 
68   uint32_t SyncJumpWidth;              /*!< Specifies the maximum number of time quanta the CAN hardware
69                                             is allowed to lengthen or shorten a bit to perform resynchronization.
70                                             This parameter can be a value of @ref CAN_synchronisation_jump_width */
71 
72   uint32_t TimeSeg1;                   /*!< Specifies the number of time quanta in Bit Segment 1.
73                                             This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */
74 
75   uint32_t TimeSeg2;                   /*!< Specifies the number of time quanta in Bit Segment 2.
76                                             This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */
77 
78   FunctionalState TimeTriggeredMode;   /*!< Enable or disable the time triggered communication mode.
79                                             This parameter can be set to ENABLE or DISABLE. */
80 
81   FunctionalState AutoBusOff;          /*!< Enable or disable the automatic bus-off management.
82                                             This parameter can be set to ENABLE or DISABLE. */
83 
84   FunctionalState AutoWakeUp;          /*!< Enable or disable the automatic wake-up mode.
85                                             This parameter can be set to ENABLE or DISABLE. */
86 
87   FunctionalState AutoRetransmission;  /*!< Enable or disable the non-automatic retransmission mode.
88                                             This parameter can be set to ENABLE or DISABLE. */
89 
90   FunctionalState ReceiveFifoLocked;   /*!< Enable or disable the Receive FIFO Locked mode.
91                                             This parameter can be set to ENABLE or DISABLE. */
92 
93   FunctionalState TransmitFifoPriority;/*!< Enable or disable the transmit FIFO priority.
94                                             This parameter can be set to ENABLE or DISABLE. */
95 
96 } CAN_InitTypeDef;
97 
98 /**
99   * @brief  CAN filter configuration structure definition
100   */
101 typedef struct
102 {
103   uint32_t FilterIdHigh;          /*!< Specifies the filter identification number (MSBs for a 32-bit
104                                        configuration, first one for a 16-bit configuration).
105                                        This parameter must be a number between
106                                        Min_Data = 0x0000 and Max_Data = 0xFFFF. */
107 
108   uint32_t FilterIdLow;           /*!< Specifies the filter identification number (LSBs for a 32-bit
109                                        configuration, second one for a 16-bit configuration).
110                                        This parameter must be a number between
111                                        Min_Data = 0x0000 and Max_Data = 0xFFFF. */
112 
113   uint32_t FilterMaskIdHigh;      /*!< Specifies the filter mask number or identification number,
114                                        according to the mode (MSBs for a 32-bit configuration,
115                                        first one for a 16-bit configuration).
116                                        This parameter must be a number between
117                                        Min_Data = 0x0000 and Max_Data = 0xFFFF. */
118 
119   uint32_t FilterMaskIdLow;       /*!< Specifies the filter mask number or identification number,
120                                        according to the mode (LSBs for a 32-bit configuration,
121                                        second one for a 16-bit configuration).
122                                        This parameter must be a number between
123                                        Min_Data = 0x0000 and Max_Data = 0xFFFF. */
124 
125   uint32_t FilterFIFOAssignment;  /*!< Specifies the FIFO (0 or 1U) which will be assigned to the filter.
126                                        This parameter can be a value of @ref CAN_filter_FIFO */
127 
128   uint32_t FilterBank;            /*!< Specifies the filter bank which will be initialized.
129                                        This parameter mus be a number between Min_Data = 0 and Max_Data = 13. */
130 
131   uint32_t FilterMode;            /*!< Specifies the filter mode to be initialized.
132                                        This parameter can be a value of @ref CAN_filter_mode */
133 
134   uint32_t FilterScale;           /*!< Specifies the filter scale.
135                                        This parameter can be a value of @ref CAN_filter_scale */
136 
137   uint32_t FilterActivation;      /*!< Enable or disable the filter.
138                                        This parameter can be a value of @ref CAN_filter_activation */
139 
140   uint32_t SlaveStartFilterBank;  /*!< Select the start filter bank for the slave CAN instance.
141                                        STM32F0xx devices don't support slave CAN instance (dual CAN). Therefore
142                                        this parameter is meaningless but it has been kept for compatibility across
143                                        STM32 families. */
144 
145 } CAN_FilterTypeDef;
146 
147 /**
148   * @brief  CAN Tx message header structure definition
149   */
150 typedef struct
151 {
152   uint32_t StdId;    /*!< Specifies the standard identifier.
153                           This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
154 
155   uint32_t ExtId;    /*!< Specifies the extended identifier.
156                           This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
157 
158   uint32_t IDE;      /*!< Specifies the type of identifier for the message that will be transmitted.
159                           This parameter can be a value of @ref CAN_identifier_type */
160 
161   uint32_t RTR;      /*!< Specifies the type of frame for the message that will be transmitted.
162                           This parameter can be a value of @ref CAN_remote_transmission_request */
163 
164   uint32_t DLC;      /*!< Specifies the length of the frame that will be transmitted.
165                           This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
166 
167   FunctionalState TransmitGlobalTime; /*!< Specifies whether the timestamp counter value captured on start
168                           of frame transmission, is sent in DATA6 and DATA7 replacing pData[6] and pData[7].
169                           @note: Time Triggered Communication Mode must be enabled.
170                           @note: DLC must be programmed as 8 bytes, in order these 2 bytes are sent.
171                           This parameter can be set to ENABLE or DISABLE. */
172 
173 } CAN_TxHeaderTypeDef;
174 
175 /**
176   * @brief  CAN Rx message header structure definition
177   */
178 typedef struct
179 {
180   uint32_t StdId;    /*!< Specifies the standard identifier.
181                           This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF. */
182 
183   uint32_t ExtId;    /*!< Specifies the extended identifier.
184                           This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF. */
185 
186   uint32_t IDE;      /*!< Specifies the type of identifier for the message that will be transmitted.
187                           This parameter can be a value of @ref CAN_identifier_type */
188 
189   uint32_t RTR;      /*!< Specifies the type of frame for the message that will be transmitted.
190                           This parameter can be a value of @ref CAN_remote_transmission_request */
191 
192   uint32_t DLC;      /*!< Specifies the length of the frame that will be transmitted.
193                           This parameter must be a number between Min_Data = 0 and Max_Data = 8. */
194 
195   uint32_t Timestamp; /*!< Specifies the timestamp counter value captured on start of frame reception.
196                           @note: Time Triggered Communication Mode must be enabled.
197                           This parameter must be a number between Min_Data = 0 and Max_Data = 0xFFFF. */
198 
199   uint32_t FilterMatchIndex; /*!< Specifies the index of matching acceptance filter element.
200                           This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF. */
201 
202 } CAN_RxHeaderTypeDef;
203 
204 /**
205   * @brief  CAN handle Structure definition
206   */
207 typedef struct __CAN_HandleTypeDef
208 {
209   CAN_TypeDef                 *Instance;                 /*!< Register base address */
210 
211   CAN_InitTypeDef             Init;                      /*!< CAN required parameters */
212 
213   __IO HAL_CAN_StateTypeDef   State;                     /*!< CAN communication state */
214 
215   __IO uint32_t               ErrorCode;                 /*!< CAN Error code.
216                                                               This parameter can be a value of @ref CAN_Error_Code */
217 
218 #if USE_HAL_CAN_REGISTER_CALLBACKS == 1
219   void (* TxMailbox0CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 0 complete callback    */
220   void (* TxMailbox1CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 1 complete callback    */
221   void (* TxMailbox2CompleteCallback)(struct __CAN_HandleTypeDef *hcan);/*!< CAN Tx Mailbox 2 complete callback    */
222   void (* TxMailbox0AbortCallback)(struct __CAN_HandleTypeDef *hcan);   /*!< CAN Tx Mailbox 0 abort callback       */
223   void (* TxMailbox1AbortCallback)(struct __CAN_HandleTypeDef *hcan);   /*!< CAN Tx Mailbox 1 abort callback       */
224   void (* TxMailbox2AbortCallback)(struct __CAN_HandleTypeDef *hcan);   /*!< CAN Tx Mailbox 2 abort callback       */
225   void (* RxFifo0MsgPendingCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 0 msg pending callback    */
226   void (* RxFifo0FullCallback)(struct __CAN_HandleTypeDef *hcan);       /*!< CAN Rx FIFO 0 full callback           */
227   void (* RxFifo1MsgPendingCallback)(struct __CAN_HandleTypeDef *hcan); /*!< CAN Rx FIFO 1 msg pending callback    */
228   void (* RxFifo1FullCallback)(struct __CAN_HandleTypeDef *hcan);       /*!< CAN Rx FIFO 1 full callback           */
229   void (* SleepCallback)(struct __CAN_HandleTypeDef *hcan);             /*!< CAN Sleep callback                    */
230   void (* WakeUpFromRxMsgCallback)(struct __CAN_HandleTypeDef *hcan);   /*!< CAN Wake Up from Rx msg callback      */
231   void (* ErrorCallback)(struct __CAN_HandleTypeDef *hcan);             /*!< CAN Error callback                    */
232 
233   void (* MspInitCallback)(struct __CAN_HandleTypeDef *hcan);           /*!< CAN Msp Init callback                 */
234   void (* MspDeInitCallback)(struct __CAN_HandleTypeDef *hcan);         /*!< CAN Msp DeInit callback               */
235 
236 #endif /* (USE_HAL_CAN_REGISTER_CALLBACKS) */
237 } CAN_HandleTypeDef;
238 
239 #if USE_HAL_CAN_REGISTER_CALLBACKS == 1
240 /**
241   * @brief  HAL CAN common Callback ID enumeration definition
242   */
243 typedef enum
244 {
245   HAL_CAN_TX_MAILBOX0_COMPLETE_CB_ID       = 0x00U,    /*!< CAN Tx Mailbox 0 complete callback ID         */
246   HAL_CAN_TX_MAILBOX1_COMPLETE_CB_ID       = 0x01U,    /*!< CAN Tx Mailbox 1 complete callback ID         */
247   HAL_CAN_TX_MAILBOX2_COMPLETE_CB_ID       = 0x02U,    /*!< CAN Tx Mailbox 2 complete callback ID         */
248   HAL_CAN_TX_MAILBOX0_ABORT_CB_ID          = 0x03U,    /*!< CAN Tx Mailbox 0 abort callback ID            */
249   HAL_CAN_TX_MAILBOX1_ABORT_CB_ID          = 0x04U,    /*!< CAN Tx Mailbox 1 abort callback ID            */
250   HAL_CAN_TX_MAILBOX2_ABORT_CB_ID          = 0x05U,    /*!< CAN Tx Mailbox 2 abort callback ID            */
251   HAL_CAN_RX_FIFO0_MSG_PENDING_CB_ID       = 0x06U,    /*!< CAN Rx FIFO 0 message pending callback ID     */
252   HAL_CAN_RX_FIFO0_FULL_CB_ID              = 0x07U,    /*!< CAN Rx FIFO 0 full callback ID                */
253   HAL_CAN_RX_FIFO1_MSG_PENDING_CB_ID       = 0x08U,    /*!< CAN Rx FIFO 1 message pending callback ID     */
254   HAL_CAN_RX_FIFO1_FULL_CB_ID              = 0x09U,    /*!< CAN Rx FIFO 1 full callback ID                */
255   HAL_CAN_SLEEP_CB_ID                      = 0x0AU,    /*!< CAN Sleep callback ID                         */
256   HAL_CAN_WAKEUP_FROM_RX_MSG_CB_ID         = 0x0BU,    /*!< CAN Wake Up from Rx msg callback ID          */
257   HAL_CAN_ERROR_CB_ID                      = 0x0CU,    /*!< CAN Error callback ID                         */
258 
259   HAL_CAN_MSPINIT_CB_ID                    = 0x0DU,    /*!< CAN MspInit callback ID                       */
260   HAL_CAN_MSPDEINIT_CB_ID                  = 0x0EU,    /*!< CAN MspDeInit callback ID                     */
261 
262 } HAL_CAN_CallbackIDTypeDef;
263 
264 /**
265   * @brief  HAL CAN Callback pointer definition
266   */
267 typedef  void (*pCAN_CallbackTypeDef)(CAN_HandleTypeDef *hcan); /*!< pointer to a CAN callback function   */
268 
269 #endif /* USE_HAL_CAN_REGISTER_CALLBACKS */
270 /**
271   * @}
272   */
273 
274 /* Exported constants --------------------------------------------------------*/
275 
276 /** @defgroup CAN_Exported_Constants CAN Exported Constants
277   * @{
278   */
279 
280 /** @defgroup CAN_Error_Code CAN Error Code
281   * @{
282   */
283 #define HAL_CAN_ERROR_NONE            (0x00000000U)  /*!< No error                                             */
284 #define HAL_CAN_ERROR_EWG             (0x00000001U)  /*!< Protocol Error Warning                               */
285 #define HAL_CAN_ERROR_EPV             (0x00000002U)  /*!< Error Passive                                        */
286 #define HAL_CAN_ERROR_BOF             (0x00000004U)  /*!< Bus-off error                                        */
287 #define HAL_CAN_ERROR_STF             (0x00000008U)  /*!< Stuff error                                          */
288 #define HAL_CAN_ERROR_FOR             (0x00000010U)  /*!< Form error                                           */
289 #define HAL_CAN_ERROR_ACK             (0x00000020U)  /*!< Acknowledgment error                                 */
290 #define HAL_CAN_ERROR_BR              (0x00000040U)  /*!< Bit recessive error                                  */
291 #define HAL_CAN_ERROR_BD              (0x00000080U)  /*!< Bit dominant error                                   */
292 #define HAL_CAN_ERROR_CRC             (0x00000100U)  /*!< CRC error                                            */
293 #define HAL_CAN_ERROR_RX_FOV0         (0x00000200U)  /*!< Rx FIFO0 overrun error                               */
294 #define HAL_CAN_ERROR_RX_FOV1         (0x00000400U)  /*!< Rx FIFO1 overrun error                               */
295 #define HAL_CAN_ERROR_TX_ALST0        (0x00000800U)  /*!< TxMailbox 0 transmit failure due to arbitration lost */
296 #define HAL_CAN_ERROR_TX_TERR0        (0x00001000U)  /*!< TxMailbox 0 transmit failure due to transmit error   */
297 #define HAL_CAN_ERROR_TX_ALST1        (0x00002000U)  /*!< TxMailbox 1 transmit failure due to arbitration lost */
298 #define HAL_CAN_ERROR_TX_TERR1        (0x00004000U)  /*!< TxMailbox 1 transmit failure due to transmit error   */
299 #define HAL_CAN_ERROR_TX_ALST2        (0x00008000U)  /*!< TxMailbox 2 transmit failure due to arbitration lost */
300 #define HAL_CAN_ERROR_TX_TERR2        (0x00010000U)  /*!< TxMailbox 2 transmit failure due to transmit error   */
301 #define HAL_CAN_ERROR_TIMEOUT         (0x00020000U)  /*!< Timeout error                                        */
302 #define HAL_CAN_ERROR_NOT_INITIALIZED (0x00040000U)  /*!< Peripheral not initialized                           */
303 #define HAL_CAN_ERROR_NOT_READY       (0x00080000U)  /*!< Peripheral not ready                                 */
304 #define HAL_CAN_ERROR_NOT_STARTED     (0x00100000U)  /*!< Peripheral not started                               */
305 #define HAL_CAN_ERROR_PARAM           (0x00200000U)  /*!< Parameter error                                      */
306 
307 #if USE_HAL_CAN_REGISTER_CALLBACKS == 1
308 #define HAL_CAN_ERROR_INVALID_CALLBACK (0x00400000U) /*!< Invalid Callback error                               */
309 #endif /* USE_HAL_CAN_REGISTER_CALLBACKS */
310 #define HAL_CAN_ERROR_INTERNAL        (0x00800000U)  /*!< Internal error                                       */
311 
312 /**
313   * @}
314   */
315 
316 /** @defgroup CAN_InitStatus CAN InitStatus
317   * @{
318   */
319 #define CAN_INITSTATUS_FAILED       (0x00000000U)  /*!< CAN initialization failed */
320 #define CAN_INITSTATUS_SUCCESS      (0x00000001U)  /*!< CAN initialization OK     */
321 /**
322   * @}
323   */
324 
325 /** @defgroup CAN_operating_mode CAN Operating Mode
326   * @{
327   */
328 #define CAN_MODE_NORMAL             (0x00000000U)                              /*!< Normal mode   */
329 #define CAN_MODE_LOOPBACK           ((uint32_t)CAN_BTR_LBKM)                   /*!< Loopback mode */
330 #define CAN_MODE_SILENT             ((uint32_t)CAN_BTR_SILM)                   /*!< Silent mode   */
331 #define CAN_MODE_SILENT_LOOPBACK    ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM))  /*!< Loopback combined with
332                                                                                     silent mode   */
333 /**
334   * @}
335   */
336 
337 
338 /** @defgroup CAN_synchronisation_jump_width CAN Synchronization Jump Width
339   * @{
340   */
341 #define CAN_SJW_1TQ                 (0x00000000U)              /*!< 1 time quantum */
342 #define CAN_SJW_2TQ                 ((uint32_t)CAN_BTR_SJW_0)  /*!< 2 time quantum */
343 #define CAN_SJW_3TQ                 ((uint32_t)CAN_BTR_SJW_1)  /*!< 3 time quantum */
344 #define CAN_SJW_4TQ                 ((uint32_t)CAN_BTR_SJW)    /*!< 4 time quantum */
345 /**
346   * @}
347   */
348 
349 /** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in Bit Segment 1
350   * @{
351   */
352 #define CAN_BS1_1TQ                 (0x00000000U)                                                /*!< 1 time quantum  */
353 #define CAN_BS1_2TQ                 ((uint32_t)CAN_BTR_TS1_0)                                    /*!< 2 time quantum  */
354 #define CAN_BS1_3TQ                 ((uint32_t)CAN_BTR_TS1_1)                                    /*!< 3 time quantum  */
355 #define CAN_BS1_4TQ                 ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0))                  /*!< 4 time quantum  */
356 #define CAN_BS1_5TQ                 ((uint32_t)CAN_BTR_TS1_2)                                    /*!< 5 time quantum  */
357 #define CAN_BS1_6TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0))                  /*!< 6 time quantum  */
358 #define CAN_BS1_7TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1))                  /*!< 7 time quantum  */
359 #define CAN_BS1_8TQ                 ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0))  /*!< 8 time quantum  */
360 #define CAN_BS1_9TQ                 ((uint32_t)CAN_BTR_TS1_3)                                    /*!< 9 time quantum  */
361 #define CAN_BS1_10TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0))                  /*!< 10 time quantum */
362 #define CAN_BS1_11TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1))                  /*!< 11 time quantum */
363 #define CAN_BS1_12TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0))  /*!< 12 time quantum */
364 #define CAN_BS1_13TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2))                  /*!< 13 time quantum */
365 #define CAN_BS1_14TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0))  /*!< 14 time quantum */
366 #define CAN_BS1_15TQ                ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1))  /*!< 15 time quantum */
367 #define CAN_BS1_16TQ                ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */
368 /**
369   * @}
370   */
371 
372 /** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in Bit Segment 2
373   * @{
374   */
375 #define CAN_BS2_1TQ                 (0x00000000U)                                /*!< 1 time quantum */
376 #define CAN_BS2_2TQ                 ((uint32_t)CAN_BTR_TS2_0)                    /*!< 2 time quantum */
377 #define CAN_BS2_3TQ                 ((uint32_t)CAN_BTR_TS2_1)                    /*!< 3 time quantum */
378 #define CAN_BS2_4TQ                 ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0))  /*!< 4 time quantum */
379 #define CAN_BS2_5TQ                 ((uint32_t)CAN_BTR_TS2_2)                    /*!< 5 time quantum */
380 #define CAN_BS2_6TQ                 ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0))  /*!< 6 time quantum */
381 #define CAN_BS2_7TQ                 ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1))  /*!< 7 time quantum */
382 #define CAN_BS2_8TQ                 ((uint32_t)CAN_BTR_TS2)                      /*!< 8 time quantum */
383 /**
384   * @}
385   */
386 
387 /** @defgroup CAN_filter_mode CAN Filter Mode
388   * @{
389   */
390 #define CAN_FILTERMODE_IDMASK       (0x00000000U)  /*!< Identifier mask mode */
391 #define CAN_FILTERMODE_IDLIST       (0x00000001U)  /*!< Identifier list mode */
392 /**
393   * @}
394   */
395 
396 /** @defgroup CAN_filter_scale CAN Filter Scale
397   * @{
398   */
399 #define CAN_FILTERSCALE_16BIT       (0x00000000U)  /*!< Two 16-bit filters */
400 #define CAN_FILTERSCALE_32BIT       (0x00000001U)  /*!< One 32-bit filter  */
401 /**
402   * @}
403   */
404 
405 /** @defgroup CAN_filter_activation CAN Filter Activation
406   * @{
407   */
408 #define CAN_FILTER_DISABLE          (0x00000000U)  /*!< Disable filter */
409 #define CAN_FILTER_ENABLE           (0x00000001U)  /*!< Enable filter  */
410 /**
411   * @}
412   */
413 
414 /** @defgroup CAN_filter_FIFO CAN Filter FIFO
415   * @{
416   */
417 #define CAN_FILTER_FIFO0            (0x00000000U)  /*!< Filter FIFO 0 assignment for filter x */
418 #define CAN_FILTER_FIFO1            (0x00000001U)  /*!< Filter FIFO 1 assignment for filter x */
419 /**
420   * @}
421   */
422 
423 /** @defgroup CAN_identifier_type CAN Identifier Type
424   * @{
425   */
426 #define CAN_ID_STD                  (0x00000000U)  /*!< Standard Id */
427 #define CAN_ID_EXT                  (0x00000004U)  /*!< Extended Id */
428 /**
429   * @}
430   */
431 
432 /** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request
433   * @{
434   */
435 #define CAN_RTR_DATA                (0x00000000U)  /*!< Data frame   */
436 #define CAN_RTR_REMOTE              (0x00000002U)  /*!< Remote frame */
437 /**
438   * @}
439   */
440 
441 /** @defgroup CAN_receive_FIFO_number CAN Receive FIFO Number
442   * @{
443   */
444 #define CAN_RX_FIFO0                (0x00000000U)  /*!< CAN receive FIFO 0 */
445 #define CAN_RX_FIFO1                (0x00000001U)  /*!< CAN receive FIFO 1 */
446 /**
447   * @}
448   */
449 
450 /** @defgroup CAN_Tx_Mailboxes CAN Tx Mailboxes
451   * @{
452   */
453 #define CAN_TX_MAILBOX0             (0x00000001U)  /*!< Tx Mailbox 0  */
454 #define CAN_TX_MAILBOX1             (0x00000002U)  /*!< Tx Mailbox 1  */
455 #define CAN_TX_MAILBOX2             (0x00000004U)  /*!< Tx Mailbox 2  */
456 /**
457   * @}
458   */
459 
460 /** @defgroup CAN_flags CAN Flags
461   * @{
462   */
463 /* Transmit Flags */
464 #define CAN_FLAG_RQCP0              (0x00000500U)  /*!< Request complete MailBox 0 flag   */
465 #define CAN_FLAG_TXOK0              (0x00000501U)  /*!< Transmission OK MailBox 0 flag    */
466 #define CAN_FLAG_ALST0              (0x00000502U)  /*!< Arbitration Lost MailBox 0 flag   */
467 #define CAN_FLAG_TERR0              (0x00000503U)  /*!< Transmission error MailBox 0 flag */
468 #define CAN_FLAG_RQCP1              (0x00000508U)  /*!< Request complete MailBox1 flag    */
469 #define CAN_FLAG_TXOK1              (0x00000509U)  /*!< Transmission OK MailBox 1 flag    */
470 #define CAN_FLAG_ALST1              (0x0000050AU)  /*!< Arbitration Lost MailBox 1 flag   */
471 #define CAN_FLAG_TERR1              (0x0000050BU)  /*!< Transmission error MailBox 1 flag */
472 #define CAN_FLAG_RQCP2              (0x00000510U)  /*!< Request complete MailBox2 flag    */
473 #define CAN_FLAG_TXOK2              (0x00000511U)  /*!< Transmission OK MailBox 2 flag    */
474 #define CAN_FLAG_ALST2              (0x00000512U)  /*!< Arbitration Lost MailBox 2 flag   */
475 #define CAN_FLAG_TERR2              (0x00000513U)  /*!< Transmission error MailBox 2 flag */
476 #define CAN_FLAG_TME0               (0x0000051AU)  /*!< Transmit mailbox 0 empty flag     */
477 #define CAN_FLAG_TME1               (0x0000051BU)  /*!< Transmit mailbox 1 empty flag     */
478 #define CAN_FLAG_TME2               (0x0000051CU)  /*!< Transmit mailbox 2 empty flag     */
479 #define CAN_FLAG_LOW0               (0x0000051DU)  /*!< Lowest priority mailbox 0 flag    */
480 #define CAN_FLAG_LOW1               (0x0000051EU)  /*!< Lowest priority mailbox 1 flag    */
481 #define CAN_FLAG_LOW2               (0x0000051FU)  /*!< Lowest priority mailbox 2 flag    */
482 
483 /* Receive Flags */
484 #define CAN_FLAG_FF0                (0x00000203U)  /*!< RX FIFO 0 Full flag               */
485 #define CAN_FLAG_FOV0               (0x00000204U)  /*!< RX FIFO 0 Overrun flag            */
486 #define CAN_FLAG_FF1                (0x00000403U)  /*!< RX FIFO 1 Full flag               */
487 #define CAN_FLAG_FOV1               (0x00000404U)  /*!< RX FIFO 1 Overrun flag            */
488 
489 /* Operating Mode Flags */
490 #define CAN_FLAG_INAK               (0x00000100U)  /*!< Initialization acknowledge flag   */
491 #define CAN_FLAG_SLAK               (0x00000101U)  /*!< Sleep acknowledge flag            */
492 #define CAN_FLAG_ERRI               (0x00000102U)  /*!< Error flag                        */
493 #define CAN_FLAG_WKU                (0x00000103U)  /*!< Wake up interrupt flag            */
494 #define CAN_FLAG_SLAKI              (0x00000104U)  /*!< Sleep acknowledge interrupt flag  */
495 
496 /* Error Flags */
497 #define CAN_FLAG_EWG                (0x00000300U)  /*!< Error warning flag                */
498 #define CAN_FLAG_EPV                (0x00000301U)  /*!< Error passive flag                */
499 #define CAN_FLAG_BOF                (0x00000302U)  /*!< Bus-Off flag                      */
500 /**
501   * @}
502   */
503 
504 
505 /** @defgroup CAN_Interrupts CAN Interrupts
506   * @{
507   */
508 /* Transmit Interrupt */
509 #define CAN_IT_TX_MAILBOX_EMPTY     ((uint32_t)CAN_IER_TMEIE)   /*!< Transmit mailbox empty interrupt */
510 
511 /* Receive Interrupts */
512 #define CAN_IT_RX_FIFO0_MSG_PENDING ((uint32_t)CAN_IER_FMPIE0)  /*!< FIFO 0 message pending interrupt */
513 #define CAN_IT_RX_FIFO0_FULL        ((uint32_t)CAN_IER_FFIE0)   /*!< FIFO 0 full interrupt            */
514 #define CAN_IT_RX_FIFO0_OVERRUN     ((uint32_t)CAN_IER_FOVIE0)  /*!< FIFO 0 overrun interrupt         */
515 #define CAN_IT_RX_FIFO1_MSG_PENDING ((uint32_t)CAN_IER_FMPIE1)  /*!< FIFO 1 message pending interrupt */
516 #define CAN_IT_RX_FIFO1_FULL        ((uint32_t)CAN_IER_FFIE1)   /*!< FIFO 1 full interrupt            */
517 #define CAN_IT_RX_FIFO1_OVERRUN     ((uint32_t)CAN_IER_FOVIE1)  /*!< FIFO 1 overrun interrupt         */
518 
519 /* Operating Mode Interrupts */
520 #define CAN_IT_WAKEUP               ((uint32_t)CAN_IER_WKUIE)   /*!< Wake-up interrupt                */
521 #define CAN_IT_SLEEP_ACK            ((uint32_t)CAN_IER_SLKIE)   /*!< Sleep acknowledge interrupt      */
522 
523 /* Error Interrupts */
524 #define CAN_IT_ERROR_WARNING        ((uint32_t)CAN_IER_EWGIE)   /*!< Error warning interrupt          */
525 #define CAN_IT_ERROR_PASSIVE        ((uint32_t)CAN_IER_EPVIE)   /*!< Error passive interrupt          */
526 #define CAN_IT_BUSOFF               ((uint32_t)CAN_IER_BOFIE)   /*!< Bus-off interrupt                */
527 #define CAN_IT_LAST_ERROR_CODE      ((uint32_t)CAN_IER_LECIE)   /*!< Last error code interrupt        */
528 #define CAN_IT_ERROR                ((uint32_t)CAN_IER_ERRIE)   /*!< Error Interrupt                  */
529 /**
530   * @}
531   */
532 
533 /**
534   * @}
535   */
536 
537 /* Exported macros -----------------------------------------------------------*/
538 /** @defgroup CAN_Exported_Macros CAN Exported Macros
539   * @{
540   */
541 
542 /** @brief  Reset CAN handle state
543   * @param  __HANDLE__ CAN handle.
544   * @retval None
545   */
546 #if USE_HAL_CAN_REGISTER_CALLBACKS == 1
547 #define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) do{                                              \
548                                                      (__HANDLE__)->State = HAL_CAN_STATE_RESET;   \
549                                                      (__HANDLE__)->MspInitCallback = NULL;        \
550                                                      (__HANDLE__)->MspDeInitCallback = NULL;      \
551                                                    } while(0)
552 #else
553 #define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET)
554 #endif /*USE_HAL_CAN_REGISTER_CALLBACKS */
555 
556 /**
557   * @brief  Enable the specified CAN interrupts.
558   * @param  __HANDLE__ CAN handle.
559   * @param  __INTERRUPT__ CAN Interrupt sources to enable.
560   *           This parameter can be any combination of @arg CAN_Interrupts
561   * @retval None
562   */
563 #define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__))
564 
565 /**
566   * @brief  Disable the specified CAN interrupts.
567   * @param  __HANDLE__ CAN handle.
568   * @param  __INTERRUPT__ CAN Interrupt sources to disable.
569   *           This parameter can be any combination of @arg CAN_Interrupts
570   * @retval None
571   */
572 #define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__))
573 
574 /** @brief  Check if the specified CAN interrupt source is enabled or disabled.
575   * @param  __HANDLE__ specifies the CAN Handle.
576   * @param  __INTERRUPT__ specifies the CAN interrupt source to check.
577   *           This parameter can be a value of @arg CAN_Interrupts
578   * @retval The state of __IT__ (TRUE or FALSE).
579   */
580 #define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) & (__INTERRUPT__))
581 
582 /** @brief  Check whether the specified CAN flag is set or not.
583   * @param  __HANDLE__ specifies the CAN Handle.
584   * @param  __FLAG__ specifies the flag to check.
585   *         This parameter can be one of @arg CAN_flags
586   * @retval The state of __FLAG__ (TRUE or FALSE).
587   */
588 #define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \
589   ((((__FLAG__) >> 8U) == 5U)? ((((__HANDLE__)->Instance->TSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
590    (((__FLAG__) >> 8U) == 2U)? ((((__HANDLE__)->Instance->RF0R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
591    (((__FLAG__) >> 8U) == 4U)? ((((__HANDLE__)->Instance->RF1R) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
592    (((__FLAG__) >> 8U) == 1U)? ((((__HANDLE__)->Instance->MSR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
593    (((__FLAG__) >> 8U) == 3U)? ((((__HANDLE__)->Instance->ESR) & (1U << ((__FLAG__) & CAN_FLAG_MASK))) == (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
594 
595 /** @brief  Clear the specified CAN pending flag.
596   * @param  __HANDLE__ specifies the CAN Handle.
597   * @param  __FLAG__ specifies the flag to check.
598   *         This parameter can be one of the following values:
599   *            @arg CAN_FLAG_RQCP0: Request complete MailBox 0 Flag
600   *            @arg CAN_FLAG_TXOK0: Transmission OK MailBox 0 Flag
601   *            @arg CAN_FLAG_ALST0: Arbitration Lost MailBox 0 Flag
602   *            @arg CAN_FLAG_TERR0: Transmission error MailBox 0 Flag
603   *            @arg CAN_FLAG_RQCP1: Request complete MailBox 1 Flag
604   *            @arg CAN_FLAG_TXOK1: Transmission OK MailBox 1 Flag
605   *            @arg CAN_FLAG_ALST1: Arbitration Lost MailBox 1 Flag
606   *            @arg CAN_FLAG_TERR1: Transmission error MailBox 1 Flag
607   *            @arg CAN_FLAG_RQCP2: Request complete MailBox 2 Flag
608   *            @arg CAN_FLAG_TXOK2: Transmission OK MailBox 2 Flag
609   *            @arg CAN_FLAG_ALST2: Arbitration Lost MailBox 2 Flag
610   *            @arg CAN_FLAG_TERR2: Transmission error MailBox 2 Flag
611   *            @arg CAN_FLAG_FF0:   RX FIFO 0 Full Flag
612   *            @arg CAN_FLAG_FOV0:  RX FIFO 0 Overrun Flag
613   *            @arg CAN_FLAG_FF1:   RX FIFO 1 Full Flag
614   *            @arg CAN_FLAG_FOV1:  RX FIFO 1 Overrun Flag
615   *            @arg CAN_FLAG_WKUI:  Wake up Interrupt Flag
616   *            @arg CAN_FLAG_SLAKI: Sleep acknowledge Interrupt Flag
617   * @retval None
618   */
619 #define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \
620   ((((__FLAG__) >> 8U) == 5U)? (((__HANDLE__)->Instance->TSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
621    (((__FLAG__) >> 8U) == 2U)? (((__HANDLE__)->Instance->RF0R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
622    (((__FLAG__) >> 8U) == 4U)? (((__HANDLE__)->Instance->RF1R) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): \
623    (((__FLAG__) >> 8U) == 1U)? (((__HANDLE__)->Instance->MSR) = (1U << ((__FLAG__) & CAN_FLAG_MASK))): 0U)
624 
625 /**
626  * @}
627  */
628 
629 /* Exported functions --------------------------------------------------------*/
630 /** @addtogroup CAN_Exported_Functions CAN Exported Functions
631   * @{
632   */
633 
634 /** @addtogroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
635  *  @brief    Initialization and Configuration functions
636  * @{
637  */
638 
639 /* Initialization and de-initialization functions *****************************/
640 HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef *hcan);
641 HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef *hcan);
642 void HAL_CAN_MspInit(CAN_HandleTypeDef *hcan);
643 void HAL_CAN_MspDeInit(CAN_HandleTypeDef *hcan);
644 
645 #if USE_HAL_CAN_REGISTER_CALLBACKS == 1
646 /* Callbacks Register/UnRegister functions  ***********************************/
647 HAL_StatusTypeDef HAL_CAN_RegisterCallback(CAN_HandleTypeDef *hcan, HAL_CAN_CallbackIDTypeDef CallbackID,
648                                            void (* pCallback)(CAN_HandleTypeDef *_hcan));
649 HAL_StatusTypeDef HAL_CAN_UnRegisterCallback(CAN_HandleTypeDef *hcan, HAL_CAN_CallbackIDTypeDef CallbackID);
650 
651 #endif /* (USE_HAL_CAN_REGISTER_CALLBACKS) */
652 /**
653  * @}
654  */
655 
656 /** @addtogroup CAN_Exported_Functions_Group2 Configuration functions
657  *  @brief    Configuration functions
658  * @{
659  */
660 
661 /* Configuration functions ****************************************************/
662 HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef *hcan, const CAN_FilterTypeDef *sFilterConfig);
663 
664 /**
665  * @}
666  */
667 
668 /** @addtogroup CAN_Exported_Functions_Group3 Control functions
669  *  @brief    Control functions
670  * @{
671  */
672 
673 /* Control functions **********************************************************/
674 HAL_StatusTypeDef HAL_CAN_Start(CAN_HandleTypeDef *hcan);
675 HAL_StatusTypeDef HAL_CAN_Stop(CAN_HandleTypeDef *hcan);
676 HAL_StatusTypeDef HAL_CAN_RequestSleep(CAN_HandleTypeDef *hcan);
677 HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan);
678 uint32_t HAL_CAN_IsSleepActive(const CAN_HandleTypeDef *hcan);
679 HAL_StatusTypeDef HAL_CAN_AddTxMessage(CAN_HandleTypeDef *hcan, const CAN_TxHeaderTypeDef *pHeader,
680                                        const uint8_t aData[], uint32_t *pTxMailbox);
681 HAL_StatusTypeDef HAL_CAN_AbortTxRequest(CAN_HandleTypeDef *hcan, uint32_t TxMailboxes);
682 uint32_t HAL_CAN_GetTxMailboxesFreeLevel(const CAN_HandleTypeDef *hcan);
683 uint32_t HAL_CAN_IsTxMessagePending(const CAN_HandleTypeDef *hcan, uint32_t TxMailboxes);
684 uint32_t HAL_CAN_GetTxTimestamp(const CAN_HandleTypeDef *hcan, uint32_t TxMailbox);
685 HAL_StatusTypeDef HAL_CAN_GetRxMessage(CAN_HandleTypeDef *hcan, uint32_t RxFifo,
686                                        CAN_RxHeaderTypeDef *pHeader, uint8_t aData[]);
687 uint32_t HAL_CAN_GetRxFifoFillLevel(const CAN_HandleTypeDef *hcan, uint32_t RxFifo);
688 
689 /**
690  * @}
691  */
692 
693 /** @addtogroup CAN_Exported_Functions_Group4 Interrupts management
694  *  @brief    Interrupts management
695  * @{
696  */
697 /* Interrupts management ******************************************************/
698 HAL_StatusTypeDef HAL_CAN_ActivateNotification(CAN_HandleTypeDef *hcan, uint32_t ActiveITs);
699 HAL_StatusTypeDef HAL_CAN_DeactivateNotification(CAN_HandleTypeDef *hcan, uint32_t InactiveITs);
700 void HAL_CAN_IRQHandler(CAN_HandleTypeDef *hcan);
701 
702 /**
703  * @}
704  */
705 
706 /** @addtogroup CAN_Exported_Functions_Group5 Callback functions
707  *  @brief    Callback functions
708  * @{
709  */
710 /* Callbacks functions ********************************************************/
711 
712 void HAL_CAN_TxMailbox0CompleteCallback(CAN_HandleTypeDef *hcan);
713 void HAL_CAN_TxMailbox1CompleteCallback(CAN_HandleTypeDef *hcan);
714 void HAL_CAN_TxMailbox2CompleteCallback(CAN_HandleTypeDef *hcan);
715 void HAL_CAN_TxMailbox0AbortCallback(CAN_HandleTypeDef *hcan);
716 void HAL_CAN_TxMailbox1AbortCallback(CAN_HandleTypeDef *hcan);
717 void HAL_CAN_TxMailbox2AbortCallback(CAN_HandleTypeDef *hcan);
718 void HAL_CAN_RxFifo0MsgPendingCallback(CAN_HandleTypeDef *hcan);
719 void HAL_CAN_RxFifo0FullCallback(CAN_HandleTypeDef *hcan);
720 void HAL_CAN_RxFifo1MsgPendingCallback(CAN_HandleTypeDef *hcan);
721 void HAL_CAN_RxFifo1FullCallback(CAN_HandleTypeDef *hcan);
722 void HAL_CAN_SleepCallback(CAN_HandleTypeDef *hcan);
723 void HAL_CAN_WakeUpFromRxMsgCallback(CAN_HandleTypeDef *hcan);
724 void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan);
725 
726 /**
727  * @}
728  */
729 
730 /** @addtogroup CAN_Exported_Functions_Group6 Peripheral State and Error functions
731  *  @brief   CAN Peripheral State functions
732  * @{
733  */
734 /* Peripheral State and Error functions ***************************************/
735 HAL_CAN_StateTypeDef HAL_CAN_GetState(const CAN_HandleTypeDef *hcan);
736 uint32_t HAL_CAN_GetError(const CAN_HandleTypeDef *hcan);
737 HAL_StatusTypeDef HAL_CAN_ResetError(CAN_HandleTypeDef *hcan);
738 
739 /**
740  * @}
741  */
742 
743 /**
744  * @}
745  */
746 
747 /* Private types -------------------------------------------------------------*/
748 /** @defgroup CAN_Private_Types CAN Private Types
749   * @{
750   */
751 
752 /**
753   * @}
754   */
755 
756 /* Private variables ---------------------------------------------------------*/
757 /** @defgroup CAN_Private_Variables CAN Private Variables
758   * @{
759   */
760 
761 /**
762   * @}
763   */
764 
765 /* Private constants ---------------------------------------------------------*/
766 /** @defgroup CAN_Private_Constants CAN Private Constants
767   * @{
768   */
769 #define CAN_FLAG_MASK  (0x000000FFU)
770 /**
771   * @}
772   */
773 
774 /* Private Macros -----------------------------------------------------------*/
775 /** @defgroup CAN_Private_Macros CAN Private Macros
776   * @{
777   */
778 
779 #define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \
780                            ((MODE) == CAN_MODE_LOOPBACK)|| \
781                            ((MODE) == CAN_MODE_SILENT) || \
782                            ((MODE) == CAN_MODE_SILENT_LOOPBACK))
783 #define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ) || \
784                          ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ))
785 #define IS_CAN_BS1(BS1) (((BS1) == CAN_BS1_1TQ) || ((BS1) == CAN_BS1_2TQ) || \
786                          ((BS1) == CAN_BS1_3TQ) || ((BS1) == CAN_BS1_4TQ) || \
787                          ((BS1) == CAN_BS1_5TQ) || ((BS1) == CAN_BS1_6TQ) || \
788                          ((BS1) == CAN_BS1_7TQ) || ((BS1) == CAN_BS1_8TQ) || \
789                          ((BS1) == CAN_BS1_9TQ) || ((BS1) == CAN_BS1_10TQ)|| \
790                          ((BS1) == CAN_BS1_11TQ)|| ((BS1) == CAN_BS1_12TQ)|| \
791                          ((BS1) == CAN_BS1_13TQ)|| ((BS1) == CAN_BS1_14TQ)|| \
792                          ((BS1) == CAN_BS1_15TQ)|| ((BS1) == CAN_BS1_16TQ))
793 #define IS_CAN_BS2(BS2) (((BS2) == CAN_BS2_1TQ) || ((BS2) == CAN_BS2_2TQ) || \
794                          ((BS2) == CAN_BS2_3TQ) || ((BS2) == CAN_BS2_4TQ) || \
795                          ((BS2) == CAN_BS2_5TQ) || ((BS2) == CAN_BS2_6TQ) || \
796                          ((BS2) == CAN_BS2_7TQ) || ((BS2) == CAN_BS2_8TQ))
797 #define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1U) && ((PRESCALER) <= 1024U))
798 #define IS_CAN_FILTER_ID_HALFWORD(HALFWORD) ((HALFWORD) <= 0xFFFFU)
799 #define IS_CAN_FILTER_BANK_SINGLE(BANK) ((BANK) <= 13U)
800 #define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \
801                                   ((MODE) == CAN_FILTERMODE_IDLIST))
802 #define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \
803                                     ((SCALE) == CAN_FILTERSCALE_32BIT))
804 #define IS_CAN_FILTER_ACTIVATION(ACTIVATION) (((ACTIVATION) == CAN_FILTER_DISABLE) || \
805                                               ((ACTIVATION) == CAN_FILTER_ENABLE))
806 #define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \
807                                   ((FIFO) == CAN_FILTER_FIFO1))
808 #define IS_CAN_TX_MAILBOX(TRANSMITMAILBOX) (((TRANSMITMAILBOX) == CAN_TX_MAILBOX0 ) || \
809                                             ((TRANSMITMAILBOX) == CAN_TX_MAILBOX1 ) || \
810                                             ((TRANSMITMAILBOX) == CAN_TX_MAILBOX2 ))
811 #define IS_CAN_TX_MAILBOX_LIST(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= (CAN_TX_MAILBOX0 | CAN_TX_MAILBOX1 | \
812                                                                        CAN_TX_MAILBOX2))
813 #define IS_CAN_STDID(STDID)   ((STDID) <= 0x7FFU)
814 #define IS_CAN_EXTID(EXTID)   ((EXTID) <= 0x1FFFFFFFU)
815 #define IS_CAN_DLC(DLC)       ((DLC) <= 8U)
816 #define IS_CAN_IDTYPE(IDTYPE)  (((IDTYPE) == CAN_ID_STD) || \
817                                 ((IDTYPE) == CAN_ID_EXT))
818 #define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
819 #define IS_CAN_RX_FIFO(FIFO) (((FIFO) == CAN_RX_FIFO0) || ((FIFO) == CAN_RX_FIFO1))
820 #define IS_CAN_IT(IT) ((IT) <= (CAN_IT_TX_MAILBOX_EMPTY     | CAN_IT_RX_FIFO0_MSG_PENDING      | \
821                                 CAN_IT_RX_FIFO0_FULL        | CAN_IT_RX_FIFO0_OVERRUN          | \
822                                 CAN_IT_RX_FIFO1_MSG_PENDING | CAN_IT_RX_FIFO1_FULL             | \
823                                 CAN_IT_RX_FIFO1_OVERRUN     | CAN_IT_WAKEUP                    | \
824                                 CAN_IT_SLEEP_ACK            | CAN_IT_ERROR_WARNING             | \
825                                 CAN_IT_ERROR_PASSIVE        | CAN_IT_BUSOFF                    | \
826                                 CAN_IT_LAST_ERROR_CODE      | CAN_IT_ERROR))
827 
828 /**
829   * @}
830   */
831 /* End of private macros -----------------------------------------------------*/
832 
833 /**
834   * @}
835   */
836 
837 
838 #endif /* CAN */
839 /**
840   * @}
841   */
842 
843 #ifdef __cplusplus
844 }
845 #endif
846 
847 #endif /* STM32F0xx_HAL_CAN_H */
848