1 /** 2 ****************************************************************************** 3 * @file stm32c0xx_hal_conf.h 4 * @author MCD Application Team 5 * @brief HAL configuration template file. 6 * This file should be copied to the application folder and renamed 7 * to stm32c0xx_hal_conf.h. 8 ****************************************************************************** 9 * @attention 10 * 11 * Copyright (c) 2022 STMicroelectronics. 12 * All rights reserved. 13 * 14 * This software is licensed under terms that can be found in the LICENSE file 15 * in the root directory of this software component. 16 * If no LICENSE file comes with this software, it is provided AS-IS. 17 * 18 ****************************************************************************** 19 */ 20 21 /* Define to prevent recursive inclusion -------------------------------------*/ 22 #ifndef STM32C0xx_HAL_CONF_H 23 #define STM32C0xx_HAL_CONF_H 24 25 #ifdef __cplusplus 26 extern "C" { 27 #endif 28 29 /* Exported types ------------------------------------------------------------*/ 30 /* Exported constants --------------------------------------------------------*/ 31 32 /* ########################## Module Selection ############################## */ 33 /** 34 * @brief This is the list of modules to be used in the HAL driver 35 */ 36 #define HAL_MODULE_ENABLED 37 #define HAL_ADC_MODULE_ENABLED 38 #define HAL_CORTEX_MODULE_ENABLED 39 #define HAL_CRC_MODULE_ENABLED 40 #define HAL_DMA_MODULE_ENABLED 41 #define HAL_EXTI_MODULE_ENABLED 42 #define HAL_FLASH_MODULE_ENABLED 43 #define HAL_GPIO_MODULE_ENABLED 44 #define HAL_I2C_MODULE_ENABLED 45 #define HAL_I2S_MODULE_ENABLED 46 #define HAL_IRDA_MODULE_ENABLED 47 #define HAL_IWDG_MODULE_ENABLED 48 #define HAL_PWR_MODULE_ENABLED 49 #define HAL_RCC_MODULE_ENABLED 50 #define HAL_RTC_MODULE_ENABLED 51 #define HAL_SMARTCARD_MODULE_ENABLED 52 #define HAL_SMBUS_MODULE_ENABLED 53 #define HAL_SPI_MODULE_ENABLED 54 #define HAL_TIM_MODULE_ENABLED 55 #define HAL_UART_MODULE_ENABLED 56 #define HAL_USART_MODULE_ENABLED 57 #define HAL_WWDG_MODULE_ENABLED 58 59 /* ########################## Register Callbacks selection ############################## */ 60 /** 61 * @brief Set below the peripheral configuration to "1U" to add the support 62 * of HAL callback registration/unregistration feature for the HAL 63 * driver(s). This allows user application to provide specific callback 64 * functions thanks to HAL_PPP_RegisterCallback() rather than overwriting 65 * the default weak callback functions (see each stm32c0xx_hal_ppp.h file 66 * for possible callback identifiers defined in HAL_PPP_CallbackIDTypeDef 67 * for each PPP peripheral). 68 */ 69 #define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */ 70 #define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */ 71 #define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */ 72 #define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */ 73 #define USE_HAL_IWDG_REGISTER_CALLBACKS 0U /* IWDG register callback disabled */ 74 #define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */ 75 #define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */ 76 #define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */ 77 #define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */ 78 #define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */ 79 #define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */ 80 #define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */ 81 #define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */ 82 83 /* ########################## Oscillator Values adaptation ####################*/ 84 /** 85 * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. 86 * This value is used by the RCC HAL module to compute the system frequency 87 * (when HSE is used as system clock source, directly or through the PLL). 88 */ 89 #if !defined (HSE_VALUE) 90 #define HSE_VALUE (48000000U) /*!< Value of the External oscillator in Hz */ 91 #endif /* HSE_VALUE */ 92 93 #if !defined (HSE_STARTUP_TIMEOUT) 94 #define HSE_STARTUP_TIMEOUT (100UL) /*!< Time out for HSE start up, in ms */ 95 #endif /* HSE_STARTUP_TIMEOUT */ 96 97 /** 98 * @brief Internal High Speed oscillator (HSI) value. 99 * This value is used by the RCC HAL module to compute the system frequency 100 * (when HSI is used as system clock source, directly or through the PLL). 101 */ 102 #if !defined (HSI_VALUE) 103 #define HSI_VALUE (48000000U) /*!< Value of the Internal oscillator in Hz*/ 104 #endif /* HSI_VALUE */ 105 106 /** 107 * @brief Internal Low Speed oscillator (LSI) value. 108 */ 109 #if !defined (LSI_VALUE) 110 #define LSI_VALUE (32000UL) /*!< LSI Typical Value in Hz*/ 111 #endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz 112 The real value may vary depending on the variations 113 in voltage and temperature.*/ 114 #if !defined (LSI_STARTUP_TIME) 115 #define LSI_STARTUP_TIME 130UL /*!< Time out for LSI start up, in ms */ 116 #endif /* LSI_STARTUP_TIME */ 117 /** 118 * @brief External Low Speed oscillator (LSE) value. 119 * This value is used by the UART, RTC HAL module to compute the system frequency 120 */ 121 #if !defined (LSE_VALUE) 122 #define LSE_VALUE (32768UL) /*!< Value of the External oscillator in Hz*/ 123 #endif /* LSE_VALUE */ 124 125 #if !defined (LSE_STARTUP_TIMEOUT) 126 #define LSE_STARTUP_TIMEOUT (5000UL) /*!< Time out for LSE start up, in ms */ 127 #endif /* LSE_STARTUP_TIMEOUT */ 128 129 /** 130 * @brief External clock source for I2S1 peripheral 131 * This value is used by the RCC HAL module to compute the I2S1 clock source 132 * frequency. 133 */ 134 #if !defined (EXTERNAL_I2S1_CLOCK_VALUE) 135 #define EXTERNAL_I2S1_CLOCK_VALUE (48000UL) /*!< Value of the I2S1 External clock source in Hz*/ 136 #endif /* EXTERNAL_I2S1_CLOCK_VALUE */ 137 138 /* Tip: To avoid modifying this file each time you need to use different HSE, 139 === you can define the HSE value in your toolchain compiler preprocessor. */ 140 141 /* ########################### System Configuration ######################### */ 142 /** 143 * @brief This is the HAL system configuration section 144 */ 145 #define VDD_VALUE (3300UL) /*!< Value of VDD in mv */ 146 #define TICK_INT_PRIORITY ((1UL<<__NVIC_PRIO_BITS) - 1UL) /*!< tick interrupt priority */ 147 #define USE_RTOS 0U 148 #define PREFETCH_ENABLE 1U 149 #define INSTRUCTION_CACHE_ENABLE 1U 150 151 152 /* ########################## Assert Selection ############################## */ 153 /** 154 * @brief Uncomment the line below to expanse the "assert_param" macro in the 155 * HAL drivers code 156 */ 157 /* #define USE_FULL_ASSERT 1U */ 158 159 /* Includes ------------------------------------------------------------------*/ 160 /** 161 * @brief Include modules header file 162 */ 163 164 #ifdef HAL_RCC_MODULE_ENABLED 165 #include "stm32c0xx_hal_rcc.h" 166 #endif /* HAL_RCC_MODULE_ENABLED */ 167 168 #ifdef HAL_GPIO_MODULE_ENABLED 169 #include "stm32c0xx_hal_gpio.h" 170 #endif /* HAL_GPIO_MODULE_ENABLED */ 171 172 #ifdef HAL_DMA_MODULE_ENABLED 173 #include "stm32c0xx_hal_dma.h" 174 #endif /* HAL_DMA_MODULE_ENABLED */ 175 176 #ifdef HAL_CORTEX_MODULE_ENABLED 177 #include "stm32c0xx_hal_cortex.h" 178 #endif /* HAL_CORTEX_MODULE_ENABLED */ 179 180 #ifdef HAL_ADC_MODULE_ENABLED 181 #include "stm32c0xx_hal_adc.h" 182 #include "stm32c0xx_hal_adc_ex.h" 183 #endif /* HAL_ADC_MODULE_ENABLED */ 184 185 #ifdef HAL_CRC_MODULE_ENABLED 186 #include "stm32c0xx_hal_crc.h" 187 #endif /* HAL_CRC_MODULE_ENABLED */ 188 189 #ifdef HAL_EXTI_MODULE_ENABLED 190 #include "stm32c0xx_hal_exti.h" 191 #endif /* HAL_EXTI_MODULE_ENABLED */ 192 193 #ifdef HAL_FLASH_MODULE_ENABLED 194 #include "stm32c0xx_hal_flash.h" 195 #endif /* HAL_FLASH_MODULE_ENABLED */ 196 197 #ifdef HAL_I2C_MODULE_ENABLED 198 #include "stm32c0xx_hal_i2c.h" 199 #endif /* HAL_I2C_MODULE_ENABLED */ 200 201 #ifdef HAL_I2S_MODULE_ENABLED 202 #include "stm32c0xx_hal_i2s.h" 203 #endif /* HAL_I2S_MODULE_ENABLED */ 204 205 #ifdef HAL_IRDA_MODULE_ENABLED 206 #include "stm32c0xx_hal_irda.h" 207 #endif /* HAL_IRDA_MODULE_ENABLED */ 208 209 #ifdef HAL_IWDG_MODULE_ENABLED 210 #include "stm32c0xx_hal_iwdg.h" 211 #endif /* HAL_IWDG_MODULE_ENABLED */ 212 213 #ifdef HAL_PWR_MODULE_ENABLED 214 #include "stm32c0xx_hal_pwr.h" 215 #endif /* HAL_PWR_MODULE_ENABLED */ 216 217 #ifdef HAL_RTC_MODULE_ENABLED 218 #include "stm32c0xx_hal_rtc.h" 219 #endif /* HAL_RTC_MODULE_ENABLED */ 220 221 #ifdef HAL_SMARTCARD_MODULE_ENABLED 222 #include "stm32c0xx_hal_smartcard.h" 223 #endif /* HAL_SMARTCARD_MODULE_ENABLED */ 224 225 #ifdef HAL_SMBUS_MODULE_ENABLED 226 #include "stm32c0xx_hal_smbus.h" 227 #endif /* HAL_SMBUS_MODULE_ENABLED */ 228 229 #ifdef HAL_SPI_MODULE_ENABLED 230 #include "stm32c0xx_hal_spi.h" 231 #endif /* HAL_SPI_MODULE_ENABLED */ 232 233 #ifdef HAL_TIM_MODULE_ENABLED 234 #include "stm32c0xx_hal_tim.h" 235 #endif /* HAL_TIM_MODULE_ENABLED */ 236 237 #ifdef HAL_UART_MODULE_ENABLED 238 #include "stm32c0xx_hal_uart.h" 239 #endif /* HAL_UART_MODULE_ENABLED */ 240 241 #ifdef HAL_USART_MODULE_ENABLED 242 #include "stm32c0xx_hal_usart.h" 243 #endif /* HAL_USART_MODULE_ENABLED */ 244 245 #ifdef HAL_WWDG_MODULE_ENABLED 246 #include "stm32c0xx_hal_wwdg.h" 247 #endif /* HAL_WWDG_MODULE_ENABLED */ 248 249 /* Exported macro ------------------------------------------------------------*/ 250 #ifdef USE_FULL_ASSERT 251 /** 252 * @brief The assert_param macro is used for functions parameters check. 253 * @param expr If expr is false, it calls assert_failed function 254 * which reports the name of the source file and the source 255 * line number of the call that failed. 256 * If expr is true, it returns no value. 257 * @retval None 258 */ 259 #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__)) 260 /* Exported functions ------------------------------------------------------- */ 261 void assert_failed(uint8_t *file, uint32_t line); 262 #else 263 #define assert_param(expr) ((void)0U) 264 #endif /* USE_FULL_ASSERT */ 265 266 #ifdef __cplusplus 267 } 268 #endif 269 270 #endif /* STM32C0xx_HAL_CONF_H */ 271
