1 /**
2 ******************************************************************************
3 * @file stm32wbxx_hal_smartcard.c
4 * @author MCD Application Team
5 * @brief SMARTCARD HAL module driver.
6 * This file provides firmware functions to manage the following
7 * functionalities of the SMARTCARD peripheral:
8 * + Initialization and de-initialization functions
9 * + IO operation functions
10 * + Peripheral Control functions
11 * + Peripheral State and Error functions
12 *
13 ******************************************************************************
14 * @attention
15 *
16 * Copyright (c) 2019 STMicroelectronics.
17 * All rights reserved.
18 *
19 * This software is licensed under terms that can be found in the LICENSE file
20 * in the root directory of this software component.
21 * If no LICENSE file comes with this software, it is provided AS-IS.
22 *
23 ******************************************************************************
24 @verbatim
25 ==============================================================================
26 ##### How to use this driver #####
27 ==============================================================================
28 [..]
29 The SMARTCARD HAL driver can be used as follows:
30
31 (#) Declare a SMARTCARD_HandleTypeDef handle structure (eg. SMARTCARD_HandleTypeDef hsmartcard).
32 (#) Associate a USART to the SMARTCARD handle hsmartcard.
33 (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API:
34 (++) Enable the USARTx interface clock.
35 (++) USART pins configuration:
36 (+++) Enable the clock for the USART GPIOs.
37 (+++) Configure the USART pins (TX as alternate function pull-up, RX as alternate function Input).
38 (++) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT()
39 and HAL_SMARTCARD_Receive_IT() APIs):
40 (+++) Configure the USARTx interrupt priority.
41 (+++) Enable the NVIC USART IRQ handle.
42 (++) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA()
43 and HAL_SMARTCARD_Receive_DMA() APIs):
44 (+++) Declare a DMA handle structure for the Tx/Rx channel.
45 (+++) Enable the DMAx interface clock.
46 (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
47 (+++) Configure the DMA Tx/Rx channel.
48 (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle.
49 (+++) Configure the priority and enable the NVIC for the transfer complete
50 interrupt on the DMA Tx/Rx channel.
51
52 (#) Program the Baud Rate, Parity, Mode(Receiver/Transmitter), clock enabling/disabling and accordingly,
53 the clock parameters (parity, phase, last bit), prescaler value, guard time and NACK on transmission
54 error enabling or disabling in the hsmartcard handle Init structure.
55
56 (#) If required, program SMARTCARD advanced features (TX/RX pins swap, TimeOut, auto-retry counter,...)
57 in the hsmartcard handle AdvancedInit structure.
58
59 (#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API:
60 (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
61 by calling the customized HAL_SMARTCARD_MspInit() API.
62 [..]
63 (@) The specific SMARTCARD interrupts (Transmission complete interrupt,
64 RXNE interrupt and Error Interrupts) will be managed using the macros
65 __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process.
66
67 [..]
68 [..] Three operation modes are available within this driver :
69
70 *** Polling mode IO operation ***
71 =================================
72 [..]
73 (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit()
74 (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive()
75
76 *** Interrupt mode IO operation ***
77 ===================================
78 [..]
79 (+) Send an amount of data in non-blocking mode using HAL_SMARTCARD_Transmit_IT()
80 (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can
81 add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback()
82 (+) Receive an amount of data in non-blocking mode using HAL_SMARTCARD_Receive_IT()
83 (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can
84 add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback()
85 (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
86 add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback()
87
88 *** DMA mode IO operation ***
89 ==============================
90 [..]
91 (+) Send an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA()
92 (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback() is executed and user can
93 add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback()
94 (+) Receive an amount of data in non-blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA()
95 (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback() is executed and user can
96 add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback()
97 (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
98 add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback()
99
100 *** SMARTCARD HAL driver macros list ***
101 ========================================
102 [..]
103 Below the list of most used macros in SMARTCARD HAL driver.
104
105 (+) __HAL_SMARTCARD_GET_FLAG : Check whether or not the specified SMARTCARD flag is set
106 (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag
107 (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt
108 (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt
109 (+) __HAL_SMARTCARD_GET_IT_SOURCE: Check whether or not the specified SMARTCARD interrupt is enabled
110
111 [..]
112 (@) You can refer to the SMARTCARD HAL driver header file for more useful macros
113
114 ##### Callback registration #####
115 ==================================
116
117 [..]
118 The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS when set to 1
119 allows the user to configure dynamically the driver callbacks.
120
121 [..]
122 Use Function HAL_SMARTCARD_RegisterCallback() to register a user callback.
123 Function HAL_SMARTCARD_RegisterCallback() allows to register following callbacks:
124 (+) TxCpltCallback : Tx Complete Callback.
125 (+) RxCpltCallback : Rx Complete Callback.
126 (+) ErrorCallback : Error Callback.
127 (+) AbortCpltCallback : Abort Complete Callback.
128 (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback.
129 (+) AbortReceiveCpltCallback : Abort Receive Complete Callback.
130 (+) RxFifoFullCallback : Rx Fifo Full Callback.
131 (+) TxFifoEmptyCallback : Tx Fifo Empty Callback.
132 (+) MspInitCallback : SMARTCARD MspInit.
133 (+) MspDeInitCallback : SMARTCARD MspDeInit.
134 This function takes as parameters the HAL peripheral handle, the Callback ID
135 and a pointer to the user callback function.
136
137 [..]
138 Use function HAL_SMARTCARD_UnRegisterCallback() to reset a callback to the default
139 weak (surcharged) function.
140 HAL_SMARTCARD_UnRegisterCallback() takes as parameters the HAL peripheral handle,
141 and the Callback ID.
142 This function allows to reset following callbacks:
143 (+) TxCpltCallback : Tx Complete Callback.
144 (+) RxCpltCallback : Rx Complete Callback.
145 (+) ErrorCallback : Error Callback.
146 (+) AbortCpltCallback : Abort Complete Callback.
147 (+) AbortTransmitCpltCallback : Abort Transmit Complete Callback.
148 (+) AbortReceiveCpltCallback : Abort Receive Complete Callback.
149 (+) RxFifoFullCallback : Rx Fifo Full Callback.
150 (+) TxFifoEmptyCallback : Tx Fifo Empty Callback.
151 (+) MspInitCallback : SMARTCARD MspInit.
152 (+) MspDeInitCallback : SMARTCARD MspDeInit.
153
154 [..]
155 By default, after the HAL_SMARTCARD_Init() and when the state is HAL_SMARTCARD_STATE_RESET
156 all callbacks are set to the corresponding weak (surcharged) functions:
157 examples HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback().
158 Exception done for MspInit and MspDeInit functions that are respectively
159 reset to the legacy weak (surcharged) functions in the HAL_SMARTCARD_Init()
160 and HAL_SMARTCARD_DeInit() only when these callbacks are null (not registered beforehand).
161 If not, MspInit or MspDeInit are not null, the HAL_SMARTCARD_Init() and HAL_SMARTCARD_DeInit()
162 keep and use the user MspInit/MspDeInit callbacks (registered beforehand).
163
164 [..]
165 Callbacks can be registered/unregistered in HAL_SMARTCARD_STATE_READY state only.
166 Exception done MspInit/MspDeInit that can be registered/unregistered
167 in HAL_SMARTCARD_STATE_READY or HAL_SMARTCARD_STATE_RESET state, thus registered (user)
168 MspInit/DeInit callbacks can be used during the Init/DeInit.
169 In that case first register the MspInit/MspDeInit user callbacks
170 using HAL_SMARTCARD_RegisterCallback() before calling HAL_SMARTCARD_DeInit()
171 or HAL_SMARTCARD_Init() function.
172
173 [..]
174 When The compilation define USE_HAL_SMARTCARD_REGISTER_CALLBACKS is set to 0 or
175 not defined, the callback registration feature is not available
176 and weak (surcharged) callbacks are used.
177
178
179 @endverbatim
180 ******************************************************************************
181 */
182
183 /* Includes ------------------------------------------------------------------*/
184 #include "stm32wbxx_hal.h"
185
186 /** @addtogroup STM32WBxx_HAL_Driver
187 * @{
188 */
189
190 /** @defgroup SMARTCARD SMARTCARD
191 * @brief HAL SMARTCARD module driver
192 * @{
193 */
194
195 #ifdef HAL_SMARTCARD_MODULE_ENABLED
196
197 /* Private typedef -----------------------------------------------------------*/
198 /* Private define ------------------------------------------------------------*/
199 /** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants
200 * @{
201 */
202 #define SMARTCARD_TEACK_REACK_TIMEOUT 1000U /*!< SMARTCARD TX or RX enable acknowledge time-out value */
203
204 #define USART_CR1_FIELDS ((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
205 USART_CR1_RE | USART_CR1_OVER8| \
206 USART_CR1_FIFOEN)) /*!< USART CR1 fields of parameters set by SMARTCARD_SetConfig API */
207
208 #define USART_CR2_CLK_FIELDS ((uint32_t)(USART_CR2_CLKEN | USART_CR2_CPOL | \
209 USART_CR2_CPHA | USART_CR2_LBCL)) /*!< SMARTCARD clock-related USART CR2 fields of parameters */
210
211 #define USART_CR2_FIELDS ((uint32_t)(USART_CR2_RTOEN | USART_CR2_CLK_FIELDS | \
212 USART_CR2_STOP)) /*!< USART CR2 fields of parameters set by SMARTCARD_SetConfig API */
213
214 #define USART_CR3_FIELDS ((uint32_t)(USART_CR3_ONEBIT | USART_CR3_NACK | USART_CR3_SCARCNT | \
215 USART_CR3_TXFTCFG | USART_CR3_RXFTCFG )) /*!< USART CR3 fields of parameters set by SMARTCARD_SetConfig API */
216
217 #define USART_BRR_MIN 0x10U /*!< USART BRR minimum authorized value */
218
219 #define USART_BRR_MAX 0x0000FFFFU /*!< USART BRR maximum authorized value */
220 /**
221 * @}
222 */
223
224 /* Private macros ------------------------------------------------------------*/
225 /* Private variables ---------------------------------------------------------*/
226 /* Private function prototypes -----------------------------------------------*/
227 /** @addtogroup SMARTCARD_Private_Functions
228 * @{
229 */
230 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
231 void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard);
232 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
233 static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard);
234 static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard);
235 static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard);
236 static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag,
237 FlagStatus Status, uint32_t Tickstart, uint32_t Timeout);
238 static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard);
239 static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard);
240 static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma);
241 static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
242 static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma);
243 static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma);
244 static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma);
245 static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma);
246 static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma);
247 static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma);
248 static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard);
249 static void SMARTCARD_TxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard);
250 static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
251 static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard);
252 static void SMARTCARD_RxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard);
253 /**
254 * @}
255 */
256
257 /* Exported functions --------------------------------------------------------*/
258
259 /** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
260 * @{
261 */
262
263 /** @defgroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions
264 * @brief Initialization and Configuration functions
265 *
266 @verbatim
267 ==============================================================================
268 ##### Initialization and Configuration functions #####
269 ==============================================================================
270 [..]
271 This subsection provides a set of functions allowing to initialize the USARTx
272 associated to the SmartCard.
273 (+) These parameters can be configured:
274 (++) Baud Rate
275 (++) Parity: parity should be enabled, frame Length is fixed to 8 bits plus parity
276 (++) Receiver/transmitter modes
277 (++) Synchronous mode (and if enabled, phase, polarity and last bit parameters)
278 (++) Prescaler value
279 (++) Guard bit time
280 (++) NACK enabling or disabling on transmission error
281
282 (+) The following advanced features can be configured as well:
283 (++) TX and/or RX pin level inversion
284 (++) data logical level inversion
285 (++) RX and TX pins swap
286 (++) RX overrun detection disabling
287 (++) DMA disabling on RX error
288 (++) MSB first on communication line
289 (++) Time out enabling (and if activated, timeout value)
290 (++) Block length
291 (++) Auto-retry counter
292 [..]
293 The HAL_SMARTCARD_Init() API follows the USART synchronous configuration procedures
294 (details for the procedures are available in reference manual).
295
296 @endverbatim
297
298 The USART frame format is given in the following table:
299
300 Table 1. USART frame format.
301 +---------------------------------------------------------------+
302 | M1M0 bits | PCE bit | USART frame |
303 |-----------------------|---------------------------------------|
304 | 01 | 1 | | SB | 8 bit data | PB | STB | |
305 +---------------------------------------------------------------+
306
307
308 * @{
309 */
310
311 /**
312 * @brief Initialize the SMARTCARD mode according to the specified
313 * parameters in the SMARTCARD_HandleTypeDef and initialize the associated handle.
314 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
315 * the configuration information for the specified SMARTCARD module.
316 * @retval HAL status
317 */
HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef * hsmartcard)318 HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard)
319 {
320 /* Check the SMARTCARD handle allocation */
321 if (hsmartcard == NULL)
322 {
323 return HAL_ERROR;
324 }
325
326 /* Check the USART associated to the SMARTCARD handle */
327 assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));
328
329 if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET)
330 {
331 /* Allocate lock resource and initialize it */
332 hsmartcard->Lock = HAL_UNLOCKED;
333
334 #if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1
335 SMARTCARD_InitCallbacksToDefault(hsmartcard);
336
337 if (hsmartcard->MspInitCallback == NULL)
338 {
339 hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit;
340 }
341
342 /* Init the low level hardware */
343 hsmartcard->MspInitCallback(hsmartcard);
344 #else
345 /* Init the low level hardware : GPIO, CLOCK */
346 HAL_SMARTCARD_MspInit(hsmartcard);
347 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
348 }
349
350 hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;
351
352 /* Disable the Peripheral to set smartcard mode */
353 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
354
355 /* In SmartCard mode, the following bits must be kept cleared:
356 - LINEN in the USART_CR2 register,
357 - HDSEL and IREN bits in the USART_CR3 register.*/
358 CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_LINEN);
359 CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_HDSEL | USART_CR3_IREN));
360
361 /* set the USART in SMARTCARD mode */
362 SET_BIT(hsmartcard->Instance->CR3, USART_CR3_SCEN);
363
364 /* Set the SMARTCARD Communication parameters */
365 if (SMARTCARD_SetConfig(hsmartcard) == HAL_ERROR)
366 {
367 return HAL_ERROR;
368 }
369
370 /* Set the SMARTCARD transmission completion indication */
371 SMARTCARD_TRANSMISSION_COMPLETION_SETTING(hsmartcard);
372
373 if (hsmartcard->AdvancedInit.AdvFeatureInit != SMARTCARD_ADVFEATURE_NO_INIT)
374 {
375 SMARTCARD_AdvFeatureConfig(hsmartcard);
376 }
377
378 /* Enable the Peripheral */
379 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
380
381 /* TEACK and/or REACK to check before moving hsmartcard->gState and hsmartcard->RxState to Ready */
382 return (SMARTCARD_CheckIdleState(hsmartcard));
383 }
384
385 /**
386 * @brief DeInitialize the SMARTCARD peripheral.
387 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
388 * the configuration information for the specified SMARTCARD module.
389 * @retval HAL status
390 */
HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef * hsmartcard)391 HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard)
392 {
393 /* Check the SMARTCARD handle allocation */
394 if (hsmartcard == NULL)
395 {
396 return HAL_ERROR;
397 }
398
399 /* Check the USART/UART associated to the SMARTCARD handle */
400 assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));
401
402 hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY;
403
404 /* Disable the Peripheral */
405 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
406
407 WRITE_REG(hsmartcard->Instance->CR1, 0x0U);
408 WRITE_REG(hsmartcard->Instance->CR2, 0x0U);
409 WRITE_REG(hsmartcard->Instance->CR3, 0x0U);
410 WRITE_REG(hsmartcard->Instance->RTOR, 0x0U);
411 WRITE_REG(hsmartcard->Instance->GTPR, 0x0U);
412
413 /* DeInit the low level hardware */
414 #if USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1
415 if (hsmartcard->MspDeInitCallback == NULL)
416 {
417 hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit;
418 }
419 /* DeInit the low level hardware */
420 hsmartcard->MspDeInitCallback(hsmartcard);
421 #else
422 HAL_SMARTCARD_MspDeInit(hsmartcard);
423 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
424
425 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
426 hsmartcard->gState = HAL_SMARTCARD_STATE_RESET;
427 hsmartcard->RxState = HAL_SMARTCARD_STATE_RESET;
428
429 /* Process Unlock */
430 __HAL_UNLOCK(hsmartcard);
431
432 return HAL_OK;
433 }
434
435 /**
436 * @brief Initialize the SMARTCARD MSP.
437 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
438 * the configuration information for the specified SMARTCARD module.
439 * @retval None
440 */
HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef * hsmartcard)441 __weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard)
442 {
443 /* Prevent unused argument(s) compilation warning */
444 UNUSED(hsmartcard);
445
446 /* NOTE : This function should not be modified, when the callback is needed,
447 the HAL_SMARTCARD_MspInit can be implemented in the user file
448 */
449 }
450
451 /**
452 * @brief DeInitialize the SMARTCARD MSP.
453 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
454 * the configuration information for the specified SMARTCARD module.
455 * @retval None
456 */
HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef * hsmartcard)457 __weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard)
458 {
459 /* Prevent unused argument(s) compilation warning */
460 UNUSED(hsmartcard);
461
462 /* NOTE : This function should not be modified, when the callback is needed,
463 the HAL_SMARTCARD_MspDeInit can be implemented in the user file
464 */
465 }
466
467 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
468 /**
469 * @brief Register a User SMARTCARD Callback
470 * To be used instead of the weak predefined callback
471 * @note The HAL_SMARTCARD_RegisterCallback() may be called before HAL_SMARTCARD_Init()
472 * in HAL_SMARTCARD_STATE_RESET to register callbacks for HAL_SMARTCARD_MSPINIT_CB_ID
473 * and HAL_SMARTCARD_MSPDEINIT_CB_ID
474 * @param hsmartcard smartcard handle
475 * @param CallbackID ID of the callback to be registered
476 * This parameter can be one of the following values:
477 * @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID
478 * @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID
479 * @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID
480 * @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID
481 * @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID
482 * @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID
483 * @arg @ref HAL_SMARTCARD_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID
484 * @arg @ref HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID
485 * @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID
486 * @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID
487 * @param pCallback pointer to the Callback function
488 * @retval HAL status
489 */
HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef * hsmartcard,HAL_SMARTCARD_CallbackIDTypeDef CallbackID,pSMARTCARD_CallbackTypeDef pCallback)490 HAL_StatusTypeDef HAL_SMARTCARD_RegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard,
491 HAL_SMARTCARD_CallbackIDTypeDef CallbackID,
492 pSMARTCARD_CallbackTypeDef pCallback)
493 {
494 HAL_StatusTypeDef status = HAL_OK;
495
496 if (pCallback == NULL)
497 {
498 /* Update the error code */
499 hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK;
500
501 return HAL_ERROR;
502 }
503
504 if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
505 {
506 switch (CallbackID)
507 {
508
509 case HAL_SMARTCARD_TX_COMPLETE_CB_ID :
510 hsmartcard->TxCpltCallback = pCallback;
511 break;
512
513 case HAL_SMARTCARD_RX_COMPLETE_CB_ID :
514 hsmartcard->RxCpltCallback = pCallback;
515 break;
516
517 case HAL_SMARTCARD_ERROR_CB_ID :
518 hsmartcard->ErrorCallback = pCallback;
519 break;
520
521 case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID :
522 hsmartcard->AbortCpltCallback = pCallback;
523 break;
524
525 case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID :
526 hsmartcard->AbortTransmitCpltCallback = pCallback;
527 break;
528
529 case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID :
530 hsmartcard->AbortReceiveCpltCallback = pCallback;
531 break;
532
533 case HAL_SMARTCARD_RX_FIFO_FULL_CB_ID :
534 hsmartcard->RxFifoFullCallback = pCallback;
535 break;
536
537 case HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID :
538 hsmartcard->TxFifoEmptyCallback = pCallback;
539 break;
540
541 case HAL_SMARTCARD_MSPINIT_CB_ID :
542 hsmartcard->MspInitCallback = pCallback;
543 break;
544
545 case HAL_SMARTCARD_MSPDEINIT_CB_ID :
546 hsmartcard->MspDeInitCallback = pCallback;
547 break;
548
549 default :
550 /* Update the error code */
551 hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK;
552
553 /* Return error status */
554 status = HAL_ERROR;
555 break;
556 }
557 }
558 else if (hsmartcard->gState == HAL_SMARTCARD_STATE_RESET)
559 {
560 switch (CallbackID)
561 {
562 case HAL_SMARTCARD_MSPINIT_CB_ID :
563 hsmartcard->MspInitCallback = pCallback;
564 break;
565
566 case HAL_SMARTCARD_MSPDEINIT_CB_ID :
567 hsmartcard->MspDeInitCallback = pCallback;
568 break;
569
570 default :
571 /* Update the error code */
572 hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK;
573
574 /* Return error status */
575 status = HAL_ERROR;
576 break;
577 }
578 }
579 else
580 {
581 /* Update the error code */
582 hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK;
583
584 /* Return error status */
585 status = HAL_ERROR;
586 }
587
588 return status;
589 }
590
591 /**
592 * @brief Unregister an SMARTCARD callback
593 * SMARTCARD callback is redirected to the weak predefined callback
594 * @note The HAL_SMARTCARD_UnRegisterCallback() may be called before HAL_SMARTCARD_Init()
595 * in HAL_SMARTCARD_STATE_RESET to un-register callbacks for HAL_SMARTCARD_MSPINIT_CB_ID
596 * and HAL_SMARTCARD_MSPDEINIT_CB_ID
597 * @param hsmartcard smartcard handle
598 * @param CallbackID ID of the callback to be unregistered
599 * This parameter can be one of the following values:
600 * @arg @ref HAL_SMARTCARD_TX_COMPLETE_CB_ID Tx Complete Callback ID
601 * @arg @ref HAL_SMARTCARD_RX_COMPLETE_CB_ID Rx Complete Callback ID
602 * @arg @ref HAL_SMARTCARD_ERROR_CB_ID Error Callback ID
603 * @arg @ref HAL_SMARTCARD_ABORT_COMPLETE_CB_ID Abort Complete Callback ID
604 * @arg @ref HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID Abort Transmit Complete Callback ID
605 * @arg @ref HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID Abort Receive Complete Callback ID
606 * @arg @ref HAL_SMARTCARD_RX_FIFO_FULL_CB_ID Rx Fifo Full Callback ID
607 * @arg @ref HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID Tx Fifo Empty Callback ID
608 * @arg @ref HAL_SMARTCARD_MSPINIT_CB_ID MspInit Callback ID
609 * @arg @ref HAL_SMARTCARD_MSPDEINIT_CB_ID MspDeInit Callback ID
610 * @retval HAL status
611 */
HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef * hsmartcard,HAL_SMARTCARD_CallbackIDTypeDef CallbackID)612 HAL_StatusTypeDef HAL_SMARTCARD_UnRegisterCallback(SMARTCARD_HandleTypeDef *hsmartcard,
613 HAL_SMARTCARD_CallbackIDTypeDef CallbackID)
614 {
615 HAL_StatusTypeDef status = HAL_OK;
616
617 if (HAL_SMARTCARD_STATE_READY == hsmartcard->gState)
618 {
619 switch (CallbackID)
620 {
621 case HAL_SMARTCARD_TX_COMPLETE_CB_ID :
622 hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */
623 break;
624
625 case HAL_SMARTCARD_RX_COMPLETE_CB_ID :
626 hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */
627 break;
628
629 case HAL_SMARTCARD_ERROR_CB_ID :
630 hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */
631 break;
632
633 case HAL_SMARTCARD_ABORT_COMPLETE_CB_ID :
634 hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
635 break;
636
637 case HAL_SMARTCARD_ABORT_TRANSMIT_COMPLETE_CB_ID :
638 hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak
639 AbortTransmitCpltCallback*/
640 break;
641
642 case HAL_SMARTCARD_ABORT_RECEIVE_COMPLETE_CB_ID :
643 hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak
644 AbortReceiveCpltCallback */
645 break;
646
647 case HAL_SMARTCARD_RX_FIFO_FULL_CB_ID :
648 hsmartcard->RxFifoFullCallback = HAL_SMARTCARDEx_RxFifoFullCallback; /* Legacy weak RxFifoFullCallback */
649 break;
650
651 case HAL_SMARTCARD_TX_FIFO_EMPTY_CB_ID :
652 hsmartcard->TxFifoEmptyCallback = HAL_SMARTCARDEx_TxFifoEmptyCallback; /* Legacy weak TxFifoEmptyCallback */
653 break;
654
655 case HAL_SMARTCARD_MSPINIT_CB_ID :
656 hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit; /* Legacy weak MspInitCallback */
657 break;
658
659 case HAL_SMARTCARD_MSPDEINIT_CB_ID :
660 hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit; /* Legacy weak MspDeInitCallback */
661 break;
662
663 default :
664 /* Update the error code */
665 hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK;
666
667 /* Return error status */
668 status = HAL_ERROR;
669 break;
670 }
671 }
672 else if (HAL_SMARTCARD_STATE_RESET == hsmartcard->gState)
673 {
674 switch (CallbackID)
675 {
676 case HAL_SMARTCARD_MSPINIT_CB_ID :
677 hsmartcard->MspInitCallback = HAL_SMARTCARD_MspInit;
678 break;
679
680 case HAL_SMARTCARD_MSPDEINIT_CB_ID :
681 hsmartcard->MspDeInitCallback = HAL_SMARTCARD_MspDeInit;
682 break;
683
684 default :
685 /* Update the error code */
686 hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK;
687
688 /* Return error status */
689 status = HAL_ERROR;
690 break;
691 }
692 }
693 else
694 {
695 /* Update the error code */
696 hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_INVALID_CALLBACK;
697
698 /* Return error status */
699 status = HAL_ERROR;
700 }
701
702 return status;
703 }
704 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
705
706 /**
707 * @}
708 */
709
710 /** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions
711 * @brief SMARTCARD Transmit and Receive functions
712 *
713 @verbatim
714 ==============================================================================
715 ##### IO operation functions #####
716 ==============================================================================
717 [..]
718 This subsection provides a set of functions allowing to manage the SMARTCARD data transfers.
719
720 [..]
721 Smartcard is a single wire half duplex communication protocol.
722 The Smartcard interface is designed to support asynchronous protocol Smartcards as
723 defined in the ISO 7816-3 standard. The USART should be configured as:
724 (+) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register
725 (+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register.
726
727 [..]
728 (#) There are two modes of transfer:
729 (##) Blocking mode: The communication is performed in polling mode.
730 The HAL status of all data processing is returned by the same function
731 after finishing transfer.
732 (##) Non-Blocking mode: The communication is performed using Interrupts
733 or DMA, the relevant API's return the HAL status.
734 The end of the data processing will be indicated through the
735 dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when
736 using DMA mode.
737 (##) The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks
738 will be executed respectively at the end of the Transmit or Receive process
739 The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication
740 error is detected.
741
742 (#) Blocking mode APIs are :
743 (##) HAL_SMARTCARD_Transmit()
744 (##) HAL_SMARTCARD_Receive()
745
746 (#) Non Blocking mode APIs with Interrupt are :
747 (##) HAL_SMARTCARD_Transmit_IT()
748 (##) HAL_SMARTCARD_Receive_IT()
749 (##) HAL_SMARTCARD_IRQHandler()
750
751 (#) Non Blocking mode functions with DMA are :
752 (##) HAL_SMARTCARD_Transmit_DMA()
753 (##) HAL_SMARTCARD_Receive_DMA()
754
755 (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
756 (##) HAL_SMARTCARD_TxCpltCallback()
757 (##) HAL_SMARTCARD_RxCpltCallback()
758 (##) HAL_SMARTCARD_ErrorCallback()
759
760 [..]
761 (#) Non-Blocking mode transfers could be aborted using Abort API's :
762 (##) HAL_SMARTCARD_Abort()
763 (##) HAL_SMARTCARD_AbortTransmit()
764 (##) HAL_SMARTCARD_AbortReceive()
765 (##) HAL_SMARTCARD_Abort_IT()
766 (##) HAL_SMARTCARD_AbortTransmit_IT()
767 (##) HAL_SMARTCARD_AbortReceive_IT()
768
769 (#) For Abort services based on interrupts (HAL_SMARTCARD_Abortxxx_IT),
770 a set of Abort Complete Callbacks are provided:
771 (##) HAL_SMARTCARD_AbortCpltCallback()
772 (##) HAL_SMARTCARD_AbortTransmitCpltCallback()
773 (##) HAL_SMARTCARD_AbortReceiveCpltCallback()
774
775 (#) In Non-Blocking mode transfers, possible errors are split into 2 categories.
776 Errors are handled as follows :
777 (##) Error is considered as Recoverable and non blocking : Transfer could go till end, but error severity is
778 to be evaluated by user : this concerns Frame Error,
779 Parity Error or Noise Error in Interrupt mode reception .
780 Received character is then retrieved and stored in Rx buffer,
781 Error code is set to allow user to identify error type,
782 and HAL_SMARTCARD_ErrorCallback() user callback is executed. Transfer is kept ongoing on SMARTCARD side.
783 If user wants to abort it, Abort services should be called by user.
784 (##) Error is considered as Blocking : Transfer could not be completed properly and is aborted.
785 This concerns Frame Error in Interrupt mode transmission, Overrun Error in Interrupt
786 mode reception and all errors in DMA mode.
787 Error code is set to allow user to identify error type,
788 and HAL_SMARTCARD_ErrorCallback() user callback is executed.
789
790 @endverbatim
791 * @{
792 */
793
794 /**
795 * @brief Send an amount of data in blocking mode.
796 * @note When FIFO mode is enabled, writing a data in the TDR register adds one
797 * data to the TXFIFO. Write operations to the TDR register are performed
798 * when TXFNF flag is set. From hardware perspective, TXFNF flag and
799 * TXE are mapped on the same bit-field.
800 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
801 * the configuration information for the specified SMARTCARD module.
802 * @param pData pointer to data buffer.
803 * @param Size amount of data to be sent.
804 * @param Timeout Timeout duration.
805 * @retval HAL status
806 */
HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef * hsmartcard,const uint8_t * pData,uint16_t Size,uint32_t Timeout)807 HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size,
808 uint32_t Timeout)
809 {
810 uint32_t tickstart;
811 const uint8_t *ptmpdata = pData;
812
813 /* Check that a Tx process is not already ongoing */
814 if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
815 {
816 if ((ptmpdata == NULL) || (Size == 0U))
817 {
818 return HAL_ERROR;
819 }
820
821 /* Process Locked */
822 __HAL_LOCK(hsmartcard);
823
824 hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX;
825
826 /* Init tickstart for timeout management */
827 tickstart = HAL_GetTick();
828
829 /* Disable the Peripheral first to update mode for TX master */
830 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
831
832 /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor
833 the bidirectional line to detect a NACK signal in case of parity error.
834 Therefore, the receiver block must be enabled as well (RE bit must be set). */
835 if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
836 && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
837 {
838 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
839 }
840 /* Enable Tx */
841 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE);
842
843 /* Enable the Peripheral */
844 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
845
846 /* Perform a TX/RX FIFO Flush */
847 __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard);
848
849 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
850 hsmartcard->TxXferSize = Size;
851 hsmartcard->TxXferCount = Size;
852
853 while (hsmartcard->TxXferCount > 0U)
854 {
855 hsmartcard->TxXferCount--;
856 if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_TXE, RESET, tickstart, Timeout) != HAL_OK)
857 {
858 return HAL_TIMEOUT;
859 }
860 hsmartcard->Instance->TDR = (uint8_t)(*ptmpdata & 0xFFU);
861 ptmpdata++;
862 }
863 if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_TRANSMISSION_COMPLETION_FLAG(hsmartcard), RESET,
864 tickstart, Timeout) != HAL_OK)
865 {
866 return HAL_TIMEOUT;
867 }
868
869 /* Disable the Peripheral first to update mode */
870 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
871 if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
872 && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
873 {
874 /* In case of TX only mode, if NACK is enabled, receiver block has been enabled
875 for Transmit phase. Disable this receiver block. */
876 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
877 }
878 if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX)
879 || (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
880 {
881 /* Perform a TX FIFO Flush at end of Tx phase, as all sent bytes are appearing in Rx Data register */
882 __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard);
883 }
884 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
885
886 /* At end of Tx process, restore hsmartcard->gState to Ready */
887 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
888
889 /* Process Unlocked */
890 __HAL_UNLOCK(hsmartcard);
891
892 return HAL_OK;
893 }
894 else
895 {
896 return HAL_BUSY;
897 }
898 }
899
900 /**
901 * @brief Receive an amount of data in blocking mode.
902 * @note When FIFO mode is enabled, the RXFNE flag is set as long as the RXFIFO
903 * is not empty. Read operations from the RDR register are performed when
904 * RXFNE flag is set. From hardware perspective, RXFNE flag and
905 * RXNE are mapped on the same bit-field.
906 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
907 * the configuration information for the specified SMARTCARD module.
908 * @param pData pointer to data buffer.
909 * @param Size amount of data to be received.
910 * @param Timeout Timeout duration.
911 * @retval HAL status
912 */
HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef * hsmartcard,uint8_t * pData,uint16_t Size,uint32_t Timeout)913 HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size,
914 uint32_t Timeout)
915 {
916 uint32_t tickstart;
917 uint8_t *ptmpdata = pData;
918
919 /* Check that a Rx process is not already ongoing */
920 if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
921 {
922 if ((ptmpdata == NULL) || (Size == 0U))
923 {
924 return HAL_ERROR;
925 }
926
927 /* Process Locked */
928 __HAL_LOCK(hsmartcard);
929
930 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
931 hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX;
932
933 /* Init tickstart for timeout management */
934 tickstart = HAL_GetTick();
935
936 hsmartcard->RxXferSize = Size;
937 hsmartcard->RxXferCount = Size;
938
939 /* Check the remain data to be received */
940 while (hsmartcard->RxXferCount > 0U)
941 {
942 hsmartcard->RxXferCount--;
943
944 if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, SMARTCARD_FLAG_RXNE, RESET, tickstart, Timeout) != HAL_OK)
945 {
946 return HAL_TIMEOUT;
947 }
948 *ptmpdata = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0x00FF);
949 ptmpdata++;
950 }
951
952 /* At end of Rx process, restore hsmartcard->RxState to Ready */
953 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
954
955 /* Process Unlocked */
956 __HAL_UNLOCK(hsmartcard);
957
958 return HAL_OK;
959 }
960 else
961 {
962 return HAL_BUSY;
963 }
964 }
965
966 /**
967 * @brief Send an amount of data in interrupt mode.
968 * @note When FIFO mode is disabled, USART interrupt is generated whenever
969 * USART_TDR register is empty, i.e one interrupt per data to transmit.
970 * @note When FIFO mode is enabled, USART interrupt is generated whenever
971 * TXFIFO threshold reached. In that case the interrupt rate depends on
972 * TXFIFO threshold configuration.
973 * @note This function sets the hsmartcard->TxIsr function pointer according to
974 * the FIFO mode (data transmission processing depends on FIFO mode).
975 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
976 * the configuration information for the specified SMARTCARD module.
977 * @param pData pointer to data buffer.
978 * @param Size amount of data to be sent.
979 * @retval HAL status
980 */
HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef * hsmartcard,const uint8_t * pData,uint16_t Size)981 HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size)
982 {
983 /* Check that a Tx process is not already ongoing */
984 if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
985 {
986 if ((pData == NULL) || (Size == 0U))
987 {
988 return HAL_ERROR;
989 }
990
991 /* Process Locked */
992 __HAL_LOCK(hsmartcard);
993
994 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
995 hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX;
996
997 hsmartcard->pTxBuffPtr = pData;
998 hsmartcard->TxXferSize = Size;
999 hsmartcard->TxXferCount = Size;
1000 hsmartcard->TxISR = NULL;
1001
1002 /* Disable the Peripheral first to update mode for TX master */
1003 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
1004
1005 /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor
1006 the bidirectional line to detect a NACK signal in case of parity error.
1007 Therefore, the receiver block must be enabled as well (RE bit must be set). */
1008 if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
1009 && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
1010 {
1011 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
1012 }
1013 /* Enable Tx */
1014 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE);
1015
1016 /* Enable the Peripheral */
1017 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
1018
1019 /* Perform a TX/RX FIFO Flush */
1020 __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard);
1021
1022 /* Configure Tx interrupt processing */
1023 if (hsmartcard->FifoMode == SMARTCARD_FIFOMODE_ENABLE)
1024 {
1025 /* Set the Tx ISR function pointer */
1026 hsmartcard->TxISR = SMARTCARD_TxISR_FIFOEN;
1027
1028 /* Process Unlocked */
1029 __HAL_UNLOCK(hsmartcard);
1030
1031 /* Enable the SMARTCARD Error Interrupt: (Frame error) */
1032 SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
1033
1034 /* Enable the TX FIFO threshold interrupt */
1035 SET_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE);
1036 }
1037 else
1038 {
1039 /* Set the Tx ISR function pointer */
1040 hsmartcard->TxISR = SMARTCARD_TxISR;
1041
1042 /* Process Unlocked */
1043 __HAL_UNLOCK(hsmartcard);
1044
1045 /* Enable the SMARTCARD Error Interrupt: (Frame error) */
1046 SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
1047
1048 /* Enable the SMARTCARD Transmit Data Register Empty Interrupt */
1049 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE);
1050 }
1051
1052 return HAL_OK;
1053 }
1054 else
1055 {
1056 return HAL_BUSY;
1057 }
1058 }
1059
1060 /**
1061 * @brief Receive an amount of data in interrupt mode.
1062 * @note When FIFO mode is disabled, USART interrupt is generated whenever
1063 * USART_RDR register can be read, i.e one interrupt per data to receive.
1064 * @note When FIFO mode is enabled, USART interrupt is generated whenever
1065 * RXFIFO threshold reached. In that case the interrupt rate depends on
1066 * RXFIFO threshold configuration.
1067 * @note This function sets the hsmartcard->RxIsr function pointer according to
1068 * the FIFO mode (data reception processing depends on FIFO mode).
1069 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
1070 * the configuration information for the specified SMARTCARD module.
1071 * @param pData pointer to data buffer.
1072 * @param Size amount of data to be received.
1073 * @retval HAL status
1074 */
HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef * hsmartcard,uint8_t * pData,uint16_t Size)1075 HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
1076 {
1077 /* Check that a Rx process is not already ongoing */
1078 if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
1079 {
1080 if ((pData == NULL) || (Size == 0U))
1081 {
1082 return HAL_ERROR;
1083 }
1084
1085 /* Process Locked */
1086 __HAL_LOCK(hsmartcard);
1087
1088 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
1089 hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX;
1090
1091 hsmartcard->pRxBuffPtr = pData;
1092 hsmartcard->RxXferSize = Size;
1093 hsmartcard->RxXferCount = Size;
1094
1095 /* Configure Rx interrupt processing */
1096 if ((hsmartcard->FifoMode == SMARTCARD_FIFOMODE_ENABLE) && (Size >= hsmartcard->NbRxDataToProcess))
1097 {
1098 /* Set the Rx ISR function pointer */
1099 hsmartcard->RxISR = SMARTCARD_RxISR_FIFOEN;
1100
1101 /* Process Unlocked */
1102 __HAL_UNLOCK(hsmartcard);
1103
1104 /* Enable the SMARTCART Parity Error interrupt and RX FIFO Threshold interrupt */
1105 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE);
1106 SET_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTIE);
1107 }
1108 else
1109 {
1110 /* Set the Rx ISR function pointer */
1111 hsmartcard->RxISR = SMARTCARD_RxISR;
1112
1113 /* Process Unlocked */
1114 __HAL_UNLOCK(hsmartcard);
1115
1116 /* Enable the SMARTCARD Parity Error and Data Register not empty Interrupts */
1117 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE | USART_CR1_RXNEIE_RXFNEIE);
1118 }
1119
1120 /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
1121 SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
1122
1123 return HAL_OK;
1124 }
1125 else
1126 {
1127 return HAL_BUSY;
1128 }
1129 }
1130
1131 /**
1132 * @brief Send an amount of data in DMA mode.
1133 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
1134 * the configuration information for the specified SMARTCARD module.
1135 * @param pData pointer to data buffer.
1136 * @param Size amount of data to be sent.
1137 * @retval HAL status
1138 */
HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef * hsmartcard,const uint8_t * pData,uint16_t Size)1139 HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, const uint8_t *pData, uint16_t Size)
1140 {
1141 /* Check that a Tx process is not already ongoing */
1142 if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
1143 {
1144 if ((pData == NULL) || (Size == 0U))
1145 {
1146 return HAL_ERROR;
1147 }
1148
1149 /* Process Locked */
1150 __HAL_LOCK(hsmartcard);
1151
1152 hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY_TX;
1153
1154 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
1155 hsmartcard->pTxBuffPtr = pData;
1156 hsmartcard->TxXferSize = Size;
1157 hsmartcard->TxXferCount = Size;
1158
1159 /* Disable the Peripheral first to update mode for TX master */
1160 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
1161
1162 /* In case of TX only mode, if NACK is enabled, the USART must be able to monitor
1163 the bidirectional line to detect a NACK signal in case of parity error.
1164 Therefore, the receiver block must be enabled as well (RE bit must be set). */
1165 if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
1166 && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
1167 {
1168 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
1169 }
1170 /* Enable Tx */
1171 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_TE);
1172
1173 /* Enable the Peripheral */
1174 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
1175
1176 /* Perform a TX/RX FIFO Flush */
1177 __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard);
1178
1179 /* Set the SMARTCARD DMA transfer complete callback */
1180 hsmartcard->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt;
1181
1182 /* Set the SMARTCARD error callback */
1183 hsmartcard->hdmatx->XferErrorCallback = SMARTCARD_DMAError;
1184
1185 /* Set the DMA abort callback */
1186 hsmartcard->hdmatx->XferAbortCallback = NULL;
1187
1188 /* Enable the SMARTCARD transmit DMA channel */
1189 if (HAL_DMA_Start_IT(hsmartcard->hdmatx, (uint32_t)hsmartcard->pTxBuffPtr, (uint32_t)&hsmartcard->Instance->TDR,
1190 Size) == HAL_OK)
1191 {
1192 /* Clear the TC flag in the ICR register */
1193 CLEAR_BIT(hsmartcard->Instance->ICR, USART_ICR_TCCF);
1194
1195 /* Process Unlocked */
1196 __HAL_UNLOCK(hsmartcard);
1197
1198 /* Enable the UART Error Interrupt: (Frame error) */
1199 SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
1200
1201 /* Enable the DMA transfer for transmit request by setting the DMAT bit
1202 in the SMARTCARD associated USART CR3 register */
1203 SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
1204
1205 return HAL_OK;
1206 }
1207 else
1208 {
1209 /* Set error code to DMA */
1210 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
1211
1212 /* Process Unlocked */
1213 __HAL_UNLOCK(hsmartcard);
1214
1215 /* Restore hsmartcard->State to ready */
1216 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
1217
1218 return HAL_ERROR;
1219 }
1220 }
1221 else
1222 {
1223 return HAL_BUSY;
1224 }
1225 }
1226
1227 /**
1228 * @brief Receive an amount of data in DMA mode.
1229 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
1230 * the configuration information for the specified SMARTCARD module.
1231 * @param pData pointer to data buffer.
1232 * @param Size amount of data to be received.
1233 * @note The SMARTCARD-associated USART parity is enabled (PCE = 1),
1234 * the received data contain the parity bit (MSB position).
1235 * @retval HAL status
1236 */
HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef * hsmartcard,uint8_t * pData,uint16_t Size)1237 HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size)
1238 {
1239 /* Check that a Rx process is not already ongoing */
1240 if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
1241 {
1242 if ((pData == NULL) || (Size == 0U))
1243 {
1244 return HAL_ERROR;
1245 }
1246
1247 /* Process Locked */
1248 __HAL_LOCK(hsmartcard);
1249
1250 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
1251 hsmartcard->RxState = HAL_SMARTCARD_STATE_BUSY_RX;
1252
1253 hsmartcard->pRxBuffPtr = pData;
1254 hsmartcard->RxXferSize = Size;
1255
1256 /* Set the SMARTCARD DMA transfer complete callback */
1257 hsmartcard->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt;
1258
1259 /* Set the SMARTCARD DMA error callback */
1260 hsmartcard->hdmarx->XferErrorCallback = SMARTCARD_DMAError;
1261
1262 /* Set the DMA abort callback */
1263 hsmartcard->hdmarx->XferAbortCallback = NULL;
1264
1265 /* Enable the DMA channel */
1266 if (HAL_DMA_Start_IT(hsmartcard->hdmarx, (uint32_t)&hsmartcard->Instance->RDR, (uint32_t)hsmartcard->pRxBuffPtr,
1267 Size) == HAL_OK)
1268 {
1269 /* Process Unlocked */
1270 __HAL_UNLOCK(hsmartcard);
1271
1272 /* Enable the SMARTCARD Parity Error Interrupt */
1273 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE);
1274
1275 /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
1276 SET_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
1277
1278 /* Enable the DMA transfer for the receiver request by setting the DMAR bit
1279 in the SMARTCARD associated USART CR3 register */
1280 SET_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
1281
1282 return HAL_OK;
1283 }
1284 else
1285 {
1286 /* Set error code to DMA */
1287 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
1288
1289 /* Process Unlocked */
1290 __HAL_UNLOCK(hsmartcard);
1291
1292 /* Restore hsmartcard->State to ready */
1293 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
1294
1295 return HAL_ERROR;
1296 }
1297 }
1298 else
1299 {
1300 return HAL_BUSY;
1301 }
1302 }
1303
1304 /**
1305 * @brief Abort ongoing transfers (blocking mode).
1306 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
1307 * the configuration information for the specified SMARTCARD module.
1308 * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode.
1309 * This procedure performs following operations :
1310 * - Disable SMARTCARD Interrupts (Tx and Rx)
1311 * - Disable the DMA transfer in the peripheral register (if enabled)
1312 * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
1313 * - Set handle State to READY
1314 * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
1315 * @retval HAL status
1316 */
HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef * hsmartcard)1317 HAL_StatusTypeDef HAL_SMARTCARD_Abort(SMARTCARD_HandleTypeDef *hsmartcard)
1318 {
1319 /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE, RXFT, TXFT and
1320 ERR (Frame error, noise error, overrun error) interrupts */
1321 CLEAR_BIT(hsmartcard->Instance->CR1,
1322 (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE | USART_CR1_RTOIE |
1323 USART_CR1_EOBIE));
1324 CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE));
1325
1326 /* Disable the SMARTCARD DMA Tx request if enabled */
1327 if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
1328 {
1329 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
1330
1331 /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */
1332 if (hsmartcard->hdmatx != NULL)
1333 {
1334 /* Set the SMARTCARD DMA Abort callback to Null.
1335 No call back execution at end of DMA abort procedure */
1336 hsmartcard->hdmatx->XferAbortCallback = NULL;
1337
1338 if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK)
1339 {
1340 if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT)
1341 {
1342 /* Set error code to DMA */
1343 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
1344
1345 return HAL_TIMEOUT;
1346 }
1347 }
1348 }
1349 }
1350
1351 /* Disable the SMARTCARD DMA Rx request if enabled */
1352 if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
1353 {
1354 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
1355
1356 /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */
1357 if (hsmartcard->hdmarx != NULL)
1358 {
1359 /* Set the SMARTCARD DMA Abort callback to Null.
1360 No call back execution at end of DMA abort procedure */
1361 hsmartcard->hdmarx->XferAbortCallback = NULL;
1362
1363 if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK)
1364 {
1365 if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT)
1366 {
1367 /* Set error code to DMA */
1368 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
1369
1370 return HAL_TIMEOUT;
1371 }
1372 }
1373 }
1374 }
1375
1376 /* Reset Tx and Rx transfer counters */
1377 hsmartcard->TxXferCount = 0U;
1378 hsmartcard->RxXferCount = 0U;
1379
1380 /* Clear the Error flags in the ICR register */
1381 __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
1382 SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
1383 SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
1384
1385 /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
1386 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
1387 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
1388
1389 /* Reset Handle ErrorCode to No Error */
1390 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
1391
1392 return HAL_OK;
1393 }
1394
1395 /**
1396 * @brief Abort ongoing Transmit transfer (blocking mode).
1397 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
1398 * the configuration information for the specified SMARTCARD module.
1399 * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode.
1400 * This procedure performs following operations :
1401 * - Disable SMARTCARD Interrupts (Tx)
1402 * - Disable the DMA transfer in the peripheral register (if enabled)
1403 * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
1404 * - Set handle State to READY
1405 * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
1406 * @retval HAL status
1407 */
HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef * hsmartcard)1408 HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit(SMARTCARD_HandleTypeDef *hsmartcard)
1409 {
1410 /* Disable TCIE, TXEIE and TXFTIE interrupts */
1411 CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE));
1412 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE);
1413
1414 /* Check if a receive process is ongoing or not. If not disable ERR IT */
1415 if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
1416 {
1417 /* Disable the SMARTCARD Error Interrupt: (Frame error) */
1418 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
1419 }
1420
1421 /* Disable the SMARTCARD DMA Tx request if enabled */
1422 if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
1423 {
1424 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
1425
1426 /* Abort the SMARTCARD DMA Tx channel : use blocking DMA Abort API (no callback) */
1427 if (hsmartcard->hdmatx != NULL)
1428 {
1429 /* Set the SMARTCARD DMA Abort callback to Null.
1430 No call back execution at end of DMA abort procedure */
1431 hsmartcard->hdmatx->XferAbortCallback = NULL;
1432
1433 if (HAL_DMA_Abort(hsmartcard->hdmatx) != HAL_OK)
1434 {
1435 if (HAL_DMA_GetError(hsmartcard->hdmatx) == HAL_DMA_ERROR_TIMEOUT)
1436 {
1437 /* Set error code to DMA */
1438 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
1439
1440 return HAL_TIMEOUT;
1441 }
1442 }
1443 }
1444 }
1445
1446 /* Reset Tx transfer counter */
1447 hsmartcard->TxXferCount = 0U;
1448
1449 /* Clear the Error flags in the ICR register */
1450 __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF);
1451
1452 /* Restore hsmartcard->gState to Ready */
1453 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
1454
1455 return HAL_OK;
1456 }
1457
1458 /**
1459 * @brief Abort ongoing Receive transfer (blocking mode).
1460 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
1461 * the configuration information for the specified SMARTCARD module.
1462 * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode.
1463 * This procedure performs following operations :
1464 * - Disable SMARTCARD Interrupts (Rx)
1465 * - Disable the DMA transfer in the peripheral register (if enabled)
1466 * - Abort DMA transfer by calling HAL_DMA_Abort (in case of transfer in DMA mode)
1467 * - Set handle State to READY
1468 * @note This procedure is executed in blocking mode : when exiting function, Abort is considered as completed.
1469 * @retval HAL status
1470 */
HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef * hsmartcard)1471 HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive(SMARTCARD_HandleTypeDef *hsmartcard)
1472 {
1473 /* Disable RTOIE, EOBIE, RXNE, PE, RXFT, TXFT and ERR (Frame error, noise error, overrun error) interrupts */
1474 CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE |
1475 USART_CR1_EOBIE));
1476 CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
1477
1478 /* Check if a Transmit process is ongoing or not. If not disable ERR IT */
1479 if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
1480 {
1481 /* Disable the SMARTCARD Error Interrupt: (Frame error) */
1482 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
1483 }
1484
1485 /* Disable the SMARTCARD DMA Rx request if enabled */
1486 if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
1487 {
1488 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
1489
1490 /* Abort the SMARTCARD DMA Rx channel : use blocking DMA Abort API (no callback) */
1491 if (hsmartcard->hdmarx != NULL)
1492 {
1493 /* Set the SMARTCARD DMA Abort callback to Null.
1494 No call back execution at end of DMA abort procedure */
1495 hsmartcard->hdmarx->XferAbortCallback = NULL;
1496
1497 if (HAL_DMA_Abort(hsmartcard->hdmarx) != HAL_OK)
1498 {
1499 if (HAL_DMA_GetError(hsmartcard->hdmarx) == HAL_DMA_ERROR_TIMEOUT)
1500 {
1501 /* Set error code to DMA */
1502 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
1503
1504 return HAL_TIMEOUT;
1505 }
1506 }
1507 }
1508 }
1509
1510 /* Reset Rx transfer counter */
1511 hsmartcard->RxXferCount = 0U;
1512
1513 /* Clear the Error flags in the ICR register */
1514 __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
1515 SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
1516 SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
1517
1518 /* Restore hsmartcard->RxState to Ready */
1519 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
1520
1521 return HAL_OK;
1522 }
1523
1524 /**
1525 * @brief Abort ongoing transfers (Interrupt mode).
1526 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
1527 * the configuration information for the specified SMARTCARD module.
1528 * @note This procedure could be used for aborting any ongoing transfer started in Interrupt or DMA mode.
1529 * This procedure performs following operations :
1530 * - Disable SMARTCARD Interrupts (Tx and Rx)
1531 * - Disable the DMA transfer in the peripheral register (if enabled)
1532 * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
1533 * - Set handle State to READY
1534 * - At abort completion, call user abort complete callback
1535 * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be
1536 * considered as completed only when user abort complete callback is executed (not when exiting function).
1537 * @retval HAL status
1538 */
HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef * hsmartcard)1539 HAL_StatusTypeDef HAL_SMARTCARD_Abort_IT(SMARTCARD_HandleTypeDef *hsmartcard)
1540 {
1541 uint32_t abortcplt = 1U;
1542
1543 /* Disable RTOIE, EOBIE, TXEIE, TCIE, RXNE, PE, RXFT, TXFT and
1544 ERR (Frame error, noise error, overrun error) interrupts */
1545 CLEAR_BIT(hsmartcard->Instance->CR1,
1546 (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE | USART_CR1_RTOIE |
1547 USART_CR1_EOBIE));
1548 CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE | USART_CR3_TXFTIE));
1549
1550 /* If DMA Tx and/or DMA Rx Handles are associated to SMARTCARD Handle,
1551 DMA Abort complete callbacks should be initialised before any call
1552 to DMA Abort functions */
1553 /* DMA Tx Handle is valid */
1554 if (hsmartcard->hdmatx != NULL)
1555 {
1556 /* Set DMA Abort Complete callback if SMARTCARD DMA Tx request if enabled.
1557 Otherwise, set it to NULL */
1558 if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
1559 {
1560 hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxAbortCallback;
1561 }
1562 else
1563 {
1564 hsmartcard->hdmatx->XferAbortCallback = NULL;
1565 }
1566 }
1567 /* DMA Rx Handle is valid */
1568 if (hsmartcard->hdmarx != NULL)
1569 {
1570 /* Set DMA Abort Complete callback if SMARTCARD DMA Rx request if enabled.
1571 Otherwise, set it to NULL */
1572 if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
1573 {
1574 hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxAbortCallback;
1575 }
1576 else
1577 {
1578 hsmartcard->hdmarx->XferAbortCallback = NULL;
1579 }
1580 }
1581
1582 /* Disable the SMARTCARD DMA Tx request if enabled */
1583 if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
1584 {
1585 /* Disable DMA Tx at UART level */
1586 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
1587
1588 /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */
1589 if (hsmartcard->hdmatx != NULL)
1590 {
1591 /* SMARTCARD Tx DMA Abort callback has already been initialised :
1592 will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */
1593
1594 /* Abort DMA TX */
1595 if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK)
1596 {
1597 hsmartcard->hdmatx->XferAbortCallback = NULL;
1598 }
1599 else
1600 {
1601 abortcplt = 0U;
1602 }
1603 }
1604 }
1605
1606 /* Disable the SMARTCARD DMA Rx request if enabled */
1607 if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
1608 {
1609 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
1610
1611 /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */
1612 if (hsmartcard->hdmarx != NULL)
1613 {
1614 /* SMARTCARD Rx DMA Abort callback has already been initialised :
1615 will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */
1616
1617 /* Abort DMA RX */
1618 if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK)
1619 {
1620 hsmartcard->hdmarx->XferAbortCallback = NULL;
1621 abortcplt = 1U;
1622 }
1623 else
1624 {
1625 abortcplt = 0U;
1626 }
1627 }
1628 }
1629
1630 /* if no DMA abort complete callback execution is required => call user Abort Complete callback */
1631 if (abortcplt == 1U)
1632 {
1633 /* Reset Tx and Rx transfer counters */
1634 hsmartcard->TxXferCount = 0U;
1635 hsmartcard->RxXferCount = 0U;
1636
1637 /* Clear ISR function pointers */
1638 hsmartcard->RxISR = NULL;
1639 hsmartcard->TxISR = NULL;
1640
1641 /* Reset errorCode */
1642 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
1643
1644 /* Clear the Error flags in the ICR register */
1645 __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
1646 SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF |
1647 SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
1648
1649 /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
1650 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
1651 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
1652
1653 /* As no DMA to be aborted, call directly user Abort complete callback */
1654 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
1655 /* Call registered Abort complete callback */
1656 hsmartcard->AbortCpltCallback(hsmartcard);
1657 #else
1658 /* Call legacy weak Abort complete callback */
1659 HAL_SMARTCARD_AbortCpltCallback(hsmartcard);
1660 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
1661 }
1662
1663 return HAL_OK;
1664 }
1665
1666 /**
1667 * @brief Abort ongoing Transmit transfer (Interrupt mode).
1668 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
1669 * the configuration information for the specified SMARTCARD module.
1670 * @note This procedure could be used for aborting any ongoing Tx transfer started in Interrupt or DMA mode.
1671 * This procedure performs following operations :
1672 * - Disable SMARTCARD Interrupts (Tx)
1673 * - Disable the DMA transfer in the peripheral register (if enabled)
1674 * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
1675 * - Set handle State to READY
1676 * - At abort completion, call user abort complete callback
1677 * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be
1678 * considered as completed only when user abort complete callback is executed (not when exiting function).
1679 * @retval HAL status
1680 */
HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef * hsmartcard)1681 HAL_StatusTypeDef HAL_SMARTCARD_AbortTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
1682 {
1683 /* Disable TCIE, TXEIE and TXFTIE interrupts */
1684 CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE));
1685 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_TXFTIE);
1686
1687 /* Check if a receive process is ongoing or not. If not disable ERR IT */
1688 if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
1689 {
1690 /* Disable the SMARTCARD Error Interrupt: (Frame error) */
1691 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
1692 }
1693
1694 /* Disable the SMARTCARD DMA Tx request if enabled */
1695 if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
1696 {
1697 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
1698
1699 /* Abort the SMARTCARD DMA Tx channel : use non blocking DMA Abort API (callback) */
1700 if (hsmartcard->hdmatx != NULL)
1701 {
1702 /* Set the SMARTCARD DMA Abort callback :
1703 will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */
1704 hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMATxOnlyAbortCallback;
1705
1706 /* Abort DMA TX */
1707 if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK)
1708 {
1709 /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */
1710 hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx);
1711 }
1712 }
1713 else
1714 {
1715 /* Reset Tx transfer counter */
1716 hsmartcard->TxXferCount = 0U;
1717
1718 /* Clear TxISR function pointers */
1719 hsmartcard->TxISR = NULL;
1720
1721 /* Restore hsmartcard->gState to Ready */
1722 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
1723
1724 /* As no DMA to be aborted, call directly user Abort complete callback */
1725 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
1726 /* Call registered Abort Transmit Complete Callback */
1727 hsmartcard->AbortTransmitCpltCallback(hsmartcard);
1728 #else
1729 /* Call legacy weak Abort Transmit Complete Callback */
1730 HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard);
1731 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
1732 }
1733 }
1734 else
1735 {
1736 /* Reset Tx transfer counter */
1737 hsmartcard->TxXferCount = 0U;
1738
1739 /* Clear TxISR function pointers */
1740 hsmartcard->TxISR = NULL;
1741
1742 /* Clear the Error flags in the ICR register */
1743 __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF);
1744
1745 /* Restore hsmartcard->gState to Ready */
1746 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
1747
1748 /* As no DMA to be aborted, call directly user Abort complete callback */
1749 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
1750 /* Call registered Abort Transmit Complete Callback */
1751 hsmartcard->AbortTransmitCpltCallback(hsmartcard);
1752 #else
1753 /* Call legacy weak Abort Transmit Complete Callback */
1754 HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard);
1755 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
1756 }
1757
1758 return HAL_OK;
1759 }
1760
1761 /**
1762 * @brief Abort ongoing Receive transfer (Interrupt mode).
1763 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
1764 * the configuration information for the specified SMARTCARD module.
1765 * @note This procedure could be used for aborting any ongoing Rx transfer started in Interrupt or DMA mode.
1766 * This procedure performs following operations :
1767 * - Disable SMARTCARD Interrupts (Rx)
1768 * - Disable the DMA transfer in the peripheral register (if enabled)
1769 * - Abort DMA transfer by calling HAL_DMA_Abort_IT (in case of transfer in DMA mode)
1770 * - Set handle State to READY
1771 * - At abort completion, call user abort complete callback
1772 * @note This procedure is executed in Interrupt mode, meaning that abort procedure could be
1773 * considered as completed only when user abort complete callback is executed (not when exiting function).
1774 * @retval HAL status
1775 */
HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef * hsmartcard)1776 HAL_StatusTypeDef HAL_SMARTCARD_AbortReceive_IT(SMARTCARD_HandleTypeDef *hsmartcard)
1777 {
1778 /* Disable RTOIE, EOBIE, RXNE, PE, RXFT and ERR (Frame error, noise error, overrun error) interrupts */
1779 CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_RTOIE |
1780 USART_CR1_EOBIE));
1781 CLEAR_BIT(hsmartcard->Instance->CR3, (USART_CR3_EIE | USART_CR3_RXFTIE));
1782
1783 /* Check if a Transmit process is ongoing or not. If not disable ERR IT */
1784 if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
1785 {
1786 /* Disable the SMARTCARD Error Interrupt: (Frame error) */
1787 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
1788 }
1789
1790 /* Disable the SMARTCARD DMA Rx request if enabled */
1791 if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
1792 {
1793 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
1794
1795 /* Abort the SMARTCARD DMA Rx channel : use non blocking DMA Abort API (callback) */
1796 if (hsmartcard->hdmarx != NULL)
1797 {
1798 /* Set the SMARTCARD DMA Abort callback :
1799 will lead to call HAL_SMARTCARD_AbortCpltCallback() at end of DMA abort procedure */
1800 hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMARxOnlyAbortCallback;
1801
1802 /* Abort DMA RX */
1803 if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK)
1804 {
1805 /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */
1806 hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx);
1807 }
1808 }
1809 else
1810 {
1811 /* Reset Rx transfer counter */
1812 hsmartcard->RxXferCount = 0U;
1813
1814 /* Clear RxISR function pointer */
1815 hsmartcard->RxISR = NULL;
1816
1817 /* Clear the Error flags in the ICR register */
1818 __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
1819 SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF |
1820 SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
1821
1822 /* Restore hsmartcard->RxState to Ready */
1823 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
1824
1825 /* As no DMA to be aborted, call directly user Abort complete callback */
1826 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
1827 /* Call registered Abort Receive Complete Callback */
1828 hsmartcard->AbortReceiveCpltCallback(hsmartcard);
1829 #else
1830 /* Call legacy weak Abort Receive Complete Callback */
1831 HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard);
1832 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
1833 }
1834 }
1835 else
1836 {
1837 /* Reset Rx transfer counter */
1838 hsmartcard->RxXferCount = 0U;
1839
1840 /* Clear RxISR function pointer */
1841 hsmartcard->RxISR = NULL;
1842
1843 /* Clear the Error flags in the ICR register */
1844 __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
1845 SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF |
1846 SMARTCARD_CLEAR_FEF | SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
1847
1848 /* Restore hsmartcard->RxState to Ready */
1849 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
1850
1851 /* As no DMA to be aborted, call directly user Abort complete callback */
1852 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
1853 /* Call registered Abort Receive Complete Callback */
1854 hsmartcard->AbortReceiveCpltCallback(hsmartcard);
1855 #else
1856 /* Call legacy weak Abort Receive Complete Callback */
1857 HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard);
1858 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
1859 }
1860
1861 return HAL_OK;
1862 }
1863
1864 /**
1865 * @brief Handle SMARTCARD interrupt requests.
1866 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
1867 * the configuration information for the specified SMARTCARD module.
1868 * @retval None
1869 */
HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef * hsmartcard)1870 void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard)
1871 {
1872 uint32_t isrflags = READ_REG(hsmartcard->Instance->ISR);
1873 uint32_t cr1its = READ_REG(hsmartcard->Instance->CR1);
1874 uint32_t cr3its = READ_REG(hsmartcard->Instance->CR3);
1875 uint32_t errorflags;
1876 uint32_t errorcode;
1877
1878 /* If no error occurs */
1879 errorflags = (isrflags & (uint32_t)(USART_ISR_PE | USART_ISR_FE | USART_ISR_ORE | USART_ISR_NE | USART_ISR_RTOF));
1880 if (errorflags == 0U)
1881 {
1882 /* SMARTCARD in mode Receiver ---------------------------------------------------*/
1883 if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U)
1884 && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U)
1885 || ((cr3its & USART_CR3_RXFTIE) != 0U)))
1886 {
1887 if (hsmartcard->RxISR != NULL)
1888 {
1889 hsmartcard->RxISR(hsmartcard);
1890 }
1891 return;
1892 }
1893 }
1894
1895 /* If some errors occur */
1896 if ((errorflags != 0U)
1897 && ((((cr3its & (USART_CR3_RXFTIE | USART_CR3_EIE)) != 0U)
1898 || ((cr1its & (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE)) != 0U))))
1899 {
1900 /* SMARTCARD parity error interrupt occurred -------------------------------------*/
1901 if (((isrflags & USART_ISR_PE) != 0U) && ((cr1its & USART_CR1_PEIE) != 0U))
1902 {
1903 __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_PEF);
1904
1905 hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_PE;
1906 }
1907
1908 /* SMARTCARD frame error interrupt occurred --------------------------------------*/
1909 if (((isrflags & USART_ISR_FE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U))
1910 {
1911 __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_FEF);
1912
1913 hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_FE;
1914 }
1915
1916 /* SMARTCARD noise error interrupt occurred --------------------------------------*/
1917 if (((isrflags & USART_ISR_NE) != 0U) && ((cr3its & USART_CR3_EIE) != 0U))
1918 {
1919 __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_NEF);
1920
1921 hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_NE;
1922 }
1923
1924 /* SMARTCARD Over-Run interrupt occurred -----------------------------------------*/
1925 if (((isrflags & USART_ISR_ORE) != 0U)
1926 && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U)
1927 || ((cr3its & USART_CR3_RXFTIE) != 0U)
1928 || ((cr3its & USART_CR3_EIE) != 0U)))
1929 {
1930 __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_OREF);
1931
1932 hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_ORE;
1933 }
1934
1935 /* SMARTCARD receiver timeout interrupt occurred -----------------------------------------*/
1936 if (((isrflags & USART_ISR_RTOF) != 0U) && ((cr1its & USART_CR1_RTOIE) != 0U))
1937 {
1938 __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_RTOF);
1939
1940 hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_RTO;
1941 }
1942
1943 /* Call SMARTCARD Error Call back function if need be --------------------------*/
1944 if (hsmartcard->ErrorCode != HAL_SMARTCARD_ERROR_NONE)
1945 {
1946 /* SMARTCARD in mode Receiver ---------------------------------------------------*/
1947 if (((isrflags & USART_ISR_RXNE_RXFNE) != 0U)
1948 && (((cr1its & USART_CR1_RXNEIE_RXFNEIE) != 0U)
1949 || ((cr3its & USART_CR3_RXFTIE) != 0U)))
1950 {
1951 if (hsmartcard->RxISR != NULL)
1952 {
1953 hsmartcard->RxISR(hsmartcard);
1954 }
1955 }
1956
1957 /* If Error is to be considered as blocking :
1958 - Receiver Timeout error in Reception
1959 - Overrun error in Reception
1960 - any error occurs in DMA mode reception
1961 */
1962 errorcode = hsmartcard->ErrorCode;
1963 if ((HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
1964 || ((errorcode & (HAL_SMARTCARD_ERROR_RTO | HAL_SMARTCARD_ERROR_ORE)) != 0U))
1965 {
1966 /* Blocking error : transfer is aborted
1967 Set the SMARTCARD state ready to be able to start again the process,
1968 Disable Rx Interrupts, and disable Rx DMA request, if ongoing */
1969 SMARTCARD_EndRxTransfer(hsmartcard);
1970
1971 /* Disable the SMARTCARD DMA Rx request if enabled */
1972 if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
1973 {
1974 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
1975
1976 /* Abort the SMARTCARD DMA Rx channel */
1977 if (hsmartcard->hdmarx != NULL)
1978 {
1979 /* Set the SMARTCARD DMA Abort callback :
1980 will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */
1981 hsmartcard->hdmarx->XferAbortCallback = SMARTCARD_DMAAbortOnError;
1982
1983 /* Abort DMA RX */
1984 if (HAL_DMA_Abort_IT(hsmartcard->hdmarx) != HAL_OK)
1985 {
1986 /* Call Directly hsmartcard->hdmarx->XferAbortCallback function in case of error */
1987 hsmartcard->hdmarx->XferAbortCallback(hsmartcard->hdmarx);
1988 }
1989 }
1990 else
1991 {
1992 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
1993 /* Call registered user error callback */
1994 hsmartcard->ErrorCallback(hsmartcard);
1995 #else
1996 /* Call legacy weak user error callback */
1997 HAL_SMARTCARD_ErrorCallback(hsmartcard);
1998 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
1999 }
2000 }
2001 else
2002 {
2003 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2004 /* Call registered user error callback */
2005 hsmartcard->ErrorCallback(hsmartcard);
2006 #else
2007 /* Call legacy weak user error callback */
2008 HAL_SMARTCARD_ErrorCallback(hsmartcard);
2009 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
2010 }
2011 }
2012 /* other error type to be considered as blocking :
2013 - Frame error in Transmission
2014 */
2015 else if ((hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX)
2016 && ((errorcode & HAL_SMARTCARD_ERROR_FE) != 0U))
2017 {
2018 /* Blocking error : transfer is aborted
2019 Set the SMARTCARD state ready to be able to start again the process,
2020 Disable Tx Interrupts, and disable Tx DMA request, if ongoing */
2021 SMARTCARD_EndTxTransfer(hsmartcard);
2022
2023 /* Disable the SMARTCARD DMA Tx request if enabled */
2024 if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
2025 {
2026 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
2027
2028 /* Abort the SMARTCARD DMA Tx channel */
2029 if (hsmartcard->hdmatx != NULL)
2030 {
2031 /* Set the SMARTCARD DMA Abort callback :
2032 will lead to call HAL_SMARTCARD_ErrorCallback() at end of DMA abort procedure */
2033 hsmartcard->hdmatx->XferAbortCallback = SMARTCARD_DMAAbortOnError;
2034
2035 /* Abort DMA TX */
2036 if (HAL_DMA_Abort_IT(hsmartcard->hdmatx) != HAL_OK)
2037 {
2038 /* Call Directly hsmartcard->hdmatx->XferAbortCallback function in case of error */
2039 hsmartcard->hdmatx->XferAbortCallback(hsmartcard->hdmatx);
2040 }
2041 }
2042 else
2043 {
2044 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2045 /* Call registered user error callback */
2046 hsmartcard->ErrorCallback(hsmartcard);
2047 #else
2048 /* Call legacy weak user error callback */
2049 HAL_SMARTCARD_ErrorCallback(hsmartcard);
2050 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
2051 }
2052 }
2053 else
2054 {
2055 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2056 /* Call registered user error callback */
2057 hsmartcard->ErrorCallback(hsmartcard);
2058 #else
2059 /* Call legacy weak user error callback */
2060 HAL_SMARTCARD_ErrorCallback(hsmartcard);
2061 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
2062 }
2063 }
2064 else
2065 {
2066 /* Non Blocking error : transfer could go on.
2067 Error is notified to user through user error callback */
2068 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2069 /* Call registered user error callback */
2070 hsmartcard->ErrorCallback(hsmartcard);
2071 #else
2072 /* Call legacy weak user error callback */
2073 HAL_SMARTCARD_ErrorCallback(hsmartcard);
2074 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
2075 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
2076 }
2077 }
2078 return;
2079
2080 } /* End if some error occurs */
2081
2082 /* SMARTCARD in mode Receiver, end of block interruption ------------------------*/
2083 if (((isrflags & USART_ISR_EOBF) != 0U) && ((cr1its & USART_CR1_EOBIE) != 0U))
2084 {
2085 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
2086 __HAL_UNLOCK(hsmartcard);
2087 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2088 /* Call registered Rx complete callback */
2089 hsmartcard->RxCpltCallback(hsmartcard);
2090 #else
2091 /* Call legacy weak Rx complete callback */
2092 HAL_SMARTCARD_RxCpltCallback(hsmartcard);
2093 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
2094 /* Clear EOBF interrupt after HAL_SMARTCARD_RxCpltCallback() call for the End of Block information
2095 to be available during HAL_SMARTCARD_RxCpltCallback() processing */
2096 __HAL_SMARTCARD_CLEAR_IT(hsmartcard, SMARTCARD_CLEAR_EOBF);
2097 return;
2098 }
2099
2100 /* SMARTCARD in mode Transmitter ------------------------------------------------*/
2101 if (((isrflags & USART_ISR_TXE_TXFNF) != 0U)
2102 && (((cr1its & USART_CR1_TXEIE_TXFNFIE) != 0U)
2103 || ((cr3its & USART_CR3_TXFTIE) != 0U)))
2104 {
2105 if (hsmartcard->TxISR != NULL)
2106 {
2107 hsmartcard->TxISR(hsmartcard);
2108 }
2109 return;
2110 }
2111
2112 /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/
2113 if (__HAL_SMARTCARD_GET_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET)
2114 {
2115 if (__HAL_SMARTCARD_GET_IT_SOURCE(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication) != RESET)
2116 {
2117 SMARTCARD_EndTransmit_IT(hsmartcard);
2118 return;
2119 }
2120 }
2121
2122 /* SMARTCARD TX Fifo Empty occurred ----------------------------------------------*/
2123 if (((isrflags & USART_ISR_TXFE) != 0U) && ((cr1its & USART_CR1_TXFEIE) != 0U))
2124 {
2125 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2126 /* Call registered Tx Fifo Empty Callback */
2127 hsmartcard->TxFifoEmptyCallback(hsmartcard);
2128 #else
2129 /* Call legacy weak Tx Fifo Empty Callback */
2130 HAL_SMARTCARDEx_TxFifoEmptyCallback(hsmartcard);
2131 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
2132 return;
2133 }
2134
2135 /* SMARTCARD RX Fifo Full occurred ----------------------------------------------*/
2136 if (((isrflags & USART_ISR_RXFF) != 0U) && ((cr1its & USART_CR1_RXFFIE) != 0U))
2137 {
2138 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2139 /* Call registered Rx Fifo Full Callback */
2140 hsmartcard->RxFifoFullCallback(hsmartcard);
2141 #else
2142 /* Call legacy weak Rx Fifo Full Callback */
2143 HAL_SMARTCARDEx_RxFifoFullCallback(hsmartcard);
2144 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
2145 return;
2146 }
2147 }
2148
2149 /**
2150 * @brief Tx Transfer completed callback.
2151 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2152 * the configuration information for the specified SMARTCARD module.
2153 * @retval None
2154 */
HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef * hsmartcard)2155 __weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
2156 {
2157 /* Prevent unused argument(s) compilation warning */
2158 UNUSED(hsmartcard);
2159
2160 /* NOTE : This function should not be modified, when the callback is needed,
2161 the HAL_SMARTCARD_TxCpltCallback can be implemented in the user file.
2162 */
2163 }
2164
2165 /**
2166 * @brief Rx Transfer completed callback.
2167 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2168 * the configuration information for the specified SMARTCARD module.
2169 * @retval None
2170 */
HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef * hsmartcard)2171 __weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
2172 {
2173 /* Prevent unused argument(s) compilation warning */
2174 UNUSED(hsmartcard);
2175
2176 /* NOTE : This function should not be modified, when the callback is needed,
2177 the HAL_SMARTCARD_RxCpltCallback can be implemented in the user file.
2178 */
2179 }
2180
2181 /**
2182 * @brief SMARTCARD error callback.
2183 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2184 * the configuration information for the specified SMARTCARD module.
2185 * @retval None
2186 */
HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef * hsmartcard)2187 __weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard)
2188 {
2189 /* Prevent unused argument(s) compilation warning */
2190 UNUSED(hsmartcard);
2191
2192 /* NOTE : This function should not be modified, when the callback is needed,
2193 the HAL_SMARTCARD_ErrorCallback can be implemented in the user file.
2194 */
2195 }
2196
2197 /**
2198 * @brief SMARTCARD Abort Complete callback.
2199 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2200 * the configuration information for the specified SMARTCARD module.
2201 * @retval None
2202 */
HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef * hsmartcard)2203 __weak void HAL_SMARTCARD_AbortCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
2204 {
2205 /* Prevent unused argument(s) compilation warning */
2206 UNUSED(hsmartcard);
2207
2208 /* NOTE : This function should not be modified, when the callback is needed,
2209 the HAL_SMARTCARD_AbortCpltCallback can be implemented in the user file.
2210 */
2211 }
2212
2213 /**
2214 * @brief SMARTCARD Abort Complete callback.
2215 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2216 * the configuration information for the specified SMARTCARD module.
2217 * @retval None
2218 */
HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef * hsmartcard)2219 __weak void HAL_SMARTCARD_AbortTransmitCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
2220 {
2221 /* Prevent unused argument(s) compilation warning */
2222 UNUSED(hsmartcard);
2223
2224 /* NOTE : This function should not be modified, when the callback is needed,
2225 the HAL_SMARTCARD_AbortTransmitCpltCallback can be implemented in the user file.
2226 */
2227 }
2228
2229 /**
2230 * @brief SMARTCARD Abort Receive Complete callback.
2231 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2232 * the configuration information for the specified SMARTCARD module.
2233 * @retval None
2234 */
HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef * hsmartcard)2235 __weak void HAL_SMARTCARD_AbortReceiveCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard)
2236 {
2237 /* Prevent unused argument(s) compilation warning */
2238 UNUSED(hsmartcard);
2239
2240 /* NOTE : This function should not be modified, when the callback is needed,
2241 the HAL_SMARTCARD_AbortReceiveCpltCallback can be implemented in the user file.
2242 */
2243 }
2244
2245 /**
2246 * @}
2247 */
2248
2249 /** @defgroup SMARTCARD_Exported_Functions_Group4 Peripheral State and Errors functions
2250 * @brief SMARTCARD State and Errors functions
2251 *
2252 @verbatim
2253 ==============================================================================
2254 ##### Peripheral State and Errors functions #####
2255 ==============================================================================
2256 [..]
2257 This subsection provides a set of functions allowing to return the State of SmartCard
2258 handle and also return Peripheral Errors occurred during communication process
2259 (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state
2260 of the SMARTCARD peripheral.
2261 (+) HAL_SMARTCARD_GetError() checks in run-time errors that could occur during
2262 communication.
2263
2264 @endverbatim
2265 * @{
2266 */
2267
2268 /**
2269 * @brief Return the SMARTCARD handle state.
2270 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2271 * the configuration information for the specified SMARTCARD module.
2272 * @retval SMARTCARD handle state
2273 */
HAL_SMARTCARD_GetState(const SMARTCARD_HandleTypeDef * hsmartcard)2274 HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(const SMARTCARD_HandleTypeDef *hsmartcard)
2275 {
2276 /* Return SMARTCARD handle state */
2277 uint32_t temp1;
2278 uint32_t temp2;
2279 temp1 = (uint32_t)hsmartcard->gState;
2280 temp2 = (uint32_t)hsmartcard->RxState;
2281
2282 return (HAL_SMARTCARD_StateTypeDef)(temp1 | temp2);
2283 }
2284
2285 /**
2286 * @brief Return the SMARTCARD handle error code.
2287 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2288 * the configuration information for the specified SMARTCARD module.
2289 * @retval SMARTCARD handle Error Code
2290 */
HAL_SMARTCARD_GetError(const SMARTCARD_HandleTypeDef * hsmartcard)2291 uint32_t HAL_SMARTCARD_GetError(const SMARTCARD_HandleTypeDef *hsmartcard)
2292 {
2293 return hsmartcard->ErrorCode;
2294 }
2295
2296 /**
2297 * @}
2298 */
2299
2300 /**
2301 * @}
2302 */
2303
2304 /** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions
2305 * @{
2306 */
2307
2308 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2309 /**
2310 * @brief Initialize the callbacks to their default values.
2311 * @param hsmartcard SMARTCARD handle.
2312 * @retval none
2313 */
SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef * hsmartcard)2314 void SMARTCARD_InitCallbacksToDefault(SMARTCARD_HandleTypeDef *hsmartcard)
2315 {
2316 /* Init the SMARTCARD Callback settings */
2317 hsmartcard->TxCpltCallback = HAL_SMARTCARD_TxCpltCallback; /* Legacy weak TxCpltCallback */
2318 hsmartcard->RxCpltCallback = HAL_SMARTCARD_RxCpltCallback; /* Legacy weak RxCpltCallback */
2319 hsmartcard->ErrorCallback = HAL_SMARTCARD_ErrorCallback; /* Legacy weak ErrorCallback */
2320 hsmartcard->AbortCpltCallback = HAL_SMARTCARD_AbortCpltCallback; /* Legacy weak AbortCpltCallback */
2321 hsmartcard->AbortTransmitCpltCallback = HAL_SMARTCARD_AbortTransmitCpltCallback; /* Legacy weak
2322 AbortTransmitCpltCallback */
2323 hsmartcard->AbortReceiveCpltCallback = HAL_SMARTCARD_AbortReceiveCpltCallback; /* Legacy weak
2324 AbortReceiveCpltCallback */
2325 hsmartcard->RxFifoFullCallback = HAL_SMARTCARDEx_RxFifoFullCallback; /* Legacy weak
2326 RxFifoFullCallback */
2327 hsmartcard->TxFifoEmptyCallback = HAL_SMARTCARDEx_TxFifoEmptyCallback; /* Legacy weak
2328 TxFifoEmptyCallback */
2329
2330 }
2331 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACKS */
2332
2333 /**
2334 * @brief Configure the SMARTCARD associated USART peripheral.
2335 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2336 * the configuration information for the specified SMARTCARD module.
2337 * @retval HAL status
2338 */
SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef * hsmartcard)2339 static HAL_StatusTypeDef SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsmartcard)
2340 {
2341 uint32_t tmpreg;
2342 SMARTCARD_ClockSourceTypeDef clocksource;
2343 HAL_StatusTypeDef ret = HAL_OK;
2344 static const uint16_t SMARTCARDPrescTable[12] = {1U, 2U, 4U, 6U, 8U, 10U, 12U, 16U, 32U, 64U, 128U, 256U};
2345 uint32_t pclk;
2346
2347 /* Check the parameters */
2348 assert_param(IS_SMARTCARD_INSTANCE(hsmartcard->Instance));
2349 assert_param(IS_SMARTCARD_BAUDRATE(hsmartcard->Init.BaudRate));
2350 assert_param(IS_SMARTCARD_WORD_LENGTH(hsmartcard->Init.WordLength));
2351 assert_param(IS_SMARTCARD_STOPBITS(hsmartcard->Init.StopBits));
2352 assert_param(IS_SMARTCARD_PARITY(hsmartcard->Init.Parity));
2353 assert_param(IS_SMARTCARD_MODE(hsmartcard->Init.Mode));
2354 assert_param(IS_SMARTCARD_POLARITY(hsmartcard->Init.CLKPolarity));
2355 assert_param(IS_SMARTCARD_PHASE(hsmartcard->Init.CLKPhase));
2356 assert_param(IS_SMARTCARD_LASTBIT(hsmartcard->Init.CLKLastBit));
2357 assert_param(IS_SMARTCARD_ONE_BIT_SAMPLE(hsmartcard->Init.OneBitSampling));
2358 assert_param(IS_SMARTCARD_NACK(hsmartcard->Init.NACKEnable));
2359 assert_param(IS_SMARTCARD_TIMEOUT(hsmartcard->Init.TimeOutEnable));
2360 assert_param(IS_SMARTCARD_AUTORETRY_COUNT(hsmartcard->Init.AutoRetryCount));
2361 assert_param(IS_SMARTCARD_CLOCKPRESCALER(hsmartcard->Init.ClockPrescaler));
2362
2363 /*-------------------------- USART CR1 Configuration -----------------------*/
2364 /* In SmartCard mode, M and PCE are forced to 1 (8 bits + parity).
2365 * Oversampling is forced to 16 (OVER8 = 0).
2366 * Configure the Parity and Mode:
2367 * set PS bit according to hsmartcard->Init.Parity value
2368 * set TE and RE bits according to hsmartcard->Init.Mode value */
2369 tmpreg = (((uint32_t)hsmartcard->Init.Parity) | ((uint32_t)hsmartcard->Init.Mode) |
2370 ((uint32_t)hsmartcard->Init.WordLength));
2371 MODIFY_REG(hsmartcard->Instance->CR1, USART_CR1_FIELDS, tmpreg);
2372
2373 /*-------------------------- USART CR2 Configuration -----------------------*/
2374 tmpreg = hsmartcard->Init.StopBits;
2375 /* Synchronous mode is activated by default */
2376 tmpreg |= (uint32_t) USART_CR2_CLKEN | hsmartcard->Init.CLKPolarity;
2377 tmpreg |= (uint32_t) hsmartcard->Init.CLKPhase | hsmartcard->Init.CLKLastBit;
2378 tmpreg |= (uint32_t) hsmartcard->Init.TimeOutEnable;
2379 MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_FIELDS, tmpreg);
2380
2381 /*-------------------------- USART CR3 Configuration -----------------------*/
2382 /* Configure
2383 * - one-bit sampling method versus three samples' majority rule
2384 * according to hsmartcard->Init.OneBitSampling
2385 * - NACK transmission in case of parity error according
2386 * to hsmartcard->Init.NACKEnable
2387 * - autoretry counter according to hsmartcard->Init.AutoRetryCount */
2388
2389 tmpreg = (uint32_t) hsmartcard->Init.OneBitSampling | hsmartcard->Init.NACKEnable;
2390 tmpreg |= ((uint32_t)hsmartcard->Init.AutoRetryCount << USART_CR3_SCARCNT_Pos);
2391 MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_FIELDS, tmpreg);
2392
2393 /*--------------------- SMARTCARD clock PRESC Configuration ----------------*/
2394 /* Configure
2395 * - SMARTCARD Clock Prescaler: set PRESCALER according to hsmartcard->Init.ClockPrescaler value */
2396 MODIFY_REG(hsmartcard->Instance->PRESC, USART_PRESC_PRESCALER, hsmartcard->Init.ClockPrescaler);
2397
2398 /*-------------------------- USART GTPR Configuration ----------------------*/
2399 tmpreg = (hsmartcard->Init.Prescaler | ((uint32_t)hsmartcard->Init.GuardTime << USART_GTPR_GT_Pos));
2400 MODIFY_REG(hsmartcard->Instance->GTPR, (uint16_t)(USART_GTPR_GT | USART_GTPR_PSC), (uint16_t)tmpreg);
2401
2402 /*-------------------------- USART RTOR Configuration ----------------------*/
2403 tmpreg = ((uint32_t)hsmartcard->Init.BlockLength << USART_RTOR_BLEN_Pos);
2404 if (hsmartcard->Init.TimeOutEnable == SMARTCARD_TIMEOUT_ENABLE)
2405 {
2406 assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue));
2407 tmpreg |= (uint32_t) hsmartcard->Init.TimeOutValue;
2408 }
2409 MODIFY_REG(hsmartcard->Instance->RTOR, (USART_RTOR_RTO | USART_RTOR_BLEN), tmpreg);
2410
2411 /*-------------------------- USART BRR Configuration -----------------------*/
2412 SMARTCARD_GETCLOCKSOURCE(hsmartcard, clocksource);
2413 tmpreg = 0U;
2414 switch (clocksource)
2415 {
2416 case SMARTCARD_CLOCKSOURCE_PCLK2:
2417 pclk = HAL_RCC_GetPCLK2Freq();
2418 tmpreg = (uint32_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) +
2419 (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
2420 break;
2421 case SMARTCARD_CLOCKSOURCE_HSI:
2422 tmpreg = (uint32_t)(((HSI_VALUE / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) +
2423 (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
2424 break;
2425 case SMARTCARD_CLOCKSOURCE_SYSCLK:
2426 pclk = HAL_RCC_GetSysClockFreq();
2427 tmpreg = (uint32_t)(((pclk / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) +
2428 (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
2429 break;
2430 case SMARTCARD_CLOCKSOURCE_LSE:
2431 tmpreg = (uint32_t)(((uint16_t)(LSE_VALUE / SMARTCARDPrescTable[hsmartcard->Init.ClockPrescaler]) +
2432 (hsmartcard->Init.BaudRate / 2U)) / hsmartcard->Init.BaudRate);
2433 break;
2434 default:
2435 ret = HAL_ERROR;
2436 break;
2437 }
2438
2439 /* USARTDIV must be greater than or equal to 0d16 */
2440 if ((tmpreg >= USART_BRR_MIN) && (tmpreg <= USART_BRR_MAX))
2441 {
2442 hsmartcard->Instance->BRR = (uint16_t)tmpreg;
2443 }
2444 else
2445 {
2446 ret = HAL_ERROR;
2447 }
2448
2449 /* Initialize the number of data to process during RX/TX ISR execution */
2450 hsmartcard->NbTxDataToProcess = 1U;
2451 hsmartcard->NbRxDataToProcess = 1U;
2452
2453 /* Clear ISR function pointers */
2454 hsmartcard->RxISR = NULL;
2455 hsmartcard->TxISR = NULL;
2456
2457 return ret;
2458 }
2459
2460
2461 /**
2462 * @brief Configure the SMARTCARD associated USART peripheral advanced features.
2463 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2464 * the configuration information for the specified SMARTCARD module.
2465 * @retval None
2466 */
SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef * hsmartcard)2467 static void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard)
2468 {
2469 /* Check whether the set of advanced features to configure is properly set */
2470 assert_param(IS_SMARTCARD_ADVFEATURE_INIT(hsmartcard->AdvancedInit.AdvFeatureInit));
2471
2472 /* if required, configure TX pin active level inversion */
2473 if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_TXINVERT_INIT))
2474 {
2475 assert_param(IS_SMARTCARD_ADVFEATURE_TXINV(hsmartcard->AdvancedInit.TxPinLevelInvert));
2476 MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_TXINV, hsmartcard->AdvancedInit.TxPinLevelInvert);
2477 }
2478
2479 /* if required, configure RX pin active level inversion */
2480 if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXINVERT_INIT))
2481 {
2482 assert_param(IS_SMARTCARD_ADVFEATURE_RXINV(hsmartcard->AdvancedInit.RxPinLevelInvert));
2483 MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_RXINV, hsmartcard->AdvancedInit.RxPinLevelInvert);
2484 }
2485
2486 /* if required, configure data inversion */
2487 if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DATAINVERT_INIT))
2488 {
2489 assert_param(IS_SMARTCARD_ADVFEATURE_DATAINV(hsmartcard->AdvancedInit.DataInvert));
2490 MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_DATAINV, hsmartcard->AdvancedInit.DataInvert);
2491 }
2492
2493 /* if required, configure RX/TX pins swap */
2494 if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_SWAP_INIT))
2495 {
2496 assert_param(IS_SMARTCARD_ADVFEATURE_SWAP(hsmartcard->AdvancedInit.Swap));
2497 MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_SWAP, hsmartcard->AdvancedInit.Swap);
2498 }
2499
2500 /* if required, configure RX overrun detection disabling */
2501 if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT))
2502 {
2503 assert_param(IS_SMARTCARD_OVERRUN(hsmartcard->AdvancedInit.OverrunDisable));
2504 MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_OVRDIS, hsmartcard->AdvancedInit.OverrunDisable);
2505 }
2506
2507 /* if required, configure DMA disabling on reception error */
2508 if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT))
2509 {
2510 assert_param(IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(hsmartcard->AdvancedInit.DMADisableonRxError));
2511 MODIFY_REG(hsmartcard->Instance->CR3, USART_CR3_DDRE, hsmartcard->AdvancedInit.DMADisableonRxError);
2512 }
2513
2514 /* if required, configure MSB first on communication line */
2515 if (HAL_IS_BIT_SET(hsmartcard->AdvancedInit.AdvFeatureInit, SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
2516 {
2517 assert_param(IS_SMARTCARD_ADVFEATURE_MSBFIRST(hsmartcard->AdvancedInit.MSBFirst));
2518 MODIFY_REG(hsmartcard->Instance->CR2, USART_CR2_MSBFIRST, hsmartcard->AdvancedInit.MSBFirst);
2519 }
2520
2521 }
2522
2523 /**
2524 * @brief Check the SMARTCARD Idle State.
2525 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2526 * the configuration information for the specified SMARTCARD module.
2527 * @retval HAL status
2528 */
SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef * hsmartcard)2529 static HAL_StatusTypeDef SMARTCARD_CheckIdleState(SMARTCARD_HandleTypeDef *hsmartcard)
2530 {
2531 uint32_t tickstart;
2532
2533 /* Initialize the SMARTCARD ErrorCode */
2534 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
2535
2536 /* Init tickstart for timeout management */
2537 tickstart = HAL_GetTick();
2538
2539 /* Check if the Transmitter is enabled */
2540 if ((hsmartcard->Instance->CR1 & USART_CR1_TE) == USART_CR1_TE)
2541 {
2542 /* Wait until TEACK flag is set */
2543 if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_TEACK, RESET, tickstart,
2544 SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK)
2545 {
2546 /* Timeout occurred */
2547 return HAL_TIMEOUT;
2548 }
2549 }
2550 /* Check if the Receiver is enabled */
2551 if ((hsmartcard->Instance->CR1 & USART_CR1_RE) == USART_CR1_RE)
2552 {
2553 /* Wait until REACK flag is set */
2554 if (SMARTCARD_WaitOnFlagUntilTimeout(hsmartcard, USART_ISR_REACK, RESET, tickstart,
2555 SMARTCARD_TEACK_REACK_TIMEOUT) != HAL_OK)
2556 {
2557 /* Timeout occurred */
2558 return HAL_TIMEOUT;
2559 }
2560 }
2561
2562 /* Initialize the SMARTCARD states */
2563 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
2564 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
2565
2566 /* Process Unlocked */
2567 __HAL_UNLOCK(hsmartcard);
2568
2569 return HAL_OK;
2570 }
2571
2572 /**
2573 * @brief Handle SMARTCARD Communication Timeout. It waits
2574 * until a flag is no longer in the specified status.
2575 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2576 * the configuration information for the specified SMARTCARD module.
2577 * @param Flag Specifies the SMARTCARD flag to check.
2578 * @param Status The actual Flag status (SET or RESET).
2579 * @param Tickstart Tick start value
2580 * @param Timeout Timeout duration.
2581 * @retval HAL status
2582 */
SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef * hsmartcard,uint32_t Flag,FlagStatus Status,uint32_t Tickstart,uint32_t Timeout)2583 static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t Flag,
2584 FlagStatus Status, uint32_t Tickstart, uint32_t Timeout)
2585 {
2586 /* Wait until flag is set */
2587 while ((__HAL_SMARTCARD_GET_FLAG(hsmartcard, Flag) ? SET : RESET) == Status)
2588 {
2589 /* Check for the Timeout */
2590 if (Timeout != HAL_MAX_DELAY)
2591 {
2592 if (((HAL_GetTick() - Tickstart) > Timeout) || (Timeout == 0U))
2593 {
2594 /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error)
2595 interrupts for the interrupt process */
2596 CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE | USART_CR1_TXEIE_TXFNFIE));
2597 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
2598
2599 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
2600 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
2601
2602 /* Process Unlocked */
2603 __HAL_UNLOCK(hsmartcard);
2604 return HAL_TIMEOUT;
2605 }
2606 }
2607 }
2608 return HAL_OK;
2609 }
2610
2611
2612 /**
2613 * @brief End ongoing Tx transfer on SMARTCARD peripheral (following error detection or Transmit completion).
2614 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2615 * the configuration information for the specified SMARTCARD module.
2616 * @retval None
2617 */
SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef * hsmartcard)2618 static void SMARTCARD_EndTxTransfer(SMARTCARD_HandleTypeDef *hsmartcard)
2619 {
2620 /* Disable TXEIE, TCIE and ERR (Frame error, noise error, overrun error) interrupts */
2621 CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_TXEIE_TXFNFIE | USART_CR1_TCIE));
2622 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
2623
2624 /* At end of Tx process, restore hsmartcard->gState to Ready */
2625 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
2626 }
2627
2628
2629 /**
2630 * @brief End ongoing Rx transfer on UART peripheral (following error detection or Reception completion).
2631 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2632 * the configuration information for the specified SMARTCARD module.
2633 * @retval None
2634 */
SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef * hsmartcard)2635 static void SMARTCARD_EndRxTransfer(SMARTCARD_HandleTypeDef *hsmartcard)
2636 {
2637 /* Disable RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts */
2638 CLEAR_BIT(hsmartcard->Instance->CR1, (USART_CR1_RXNEIE_RXFNEIE | USART_CR1_PEIE));
2639 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
2640
2641 /* At end of Rx process, restore hsmartcard->RxState to Ready */
2642 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
2643 }
2644
2645
2646 /**
2647 * @brief DMA SMARTCARD transmit process complete callback.
2648 * @param hdma Pointer to a DMA_HandleTypeDef structure that contains
2649 * the configuration information for the specified DMA module.
2650 * @retval None
2651 */
SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef * hdma)2652 static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma)
2653 {
2654 SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
2655 hsmartcard->TxXferCount = 0U;
2656
2657 /* Disable the DMA transfer for transmit request by resetting the DMAT bit
2658 in the SMARTCARD associated USART CR3 register */
2659 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAT);
2660
2661 /* Enable the SMARTCARD Transmit Complete Interrupt */
2662 __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication);
2663 }
2664
2665 /**
2666 * @brief DMA SMARTCARD receive process complete callback.
2667 * @param hdma Pointer to a DMA_HandleTypeDef structure that contains
2668 * the configuration information for the specified DMA module.
2669 * @retval None
2670 */
SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef * hdma)2671 static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
2672 {
2673 SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
2674 hsmartcard->RxXferCount = 0U;
2675
2676 /* Disable PE and ERR (Frame error, noise error, overrun error) interrupts */
2677 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE);
2678 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
2679
2680 /* Disable the DMA transfer for the receiver request by resetting the DMAR bit
2681 in the SMARTCARD associated USART CR3 register */
2682 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_DMAR);
2683
2684 /* At end of Rx process, restore hsmartcard->RxState to Ready */
2685 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
2686
2687 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2688 /* Call registered Rx complete callback */
2689 hsmartcard->RxCpltCallback(hsmartcard);
2690 #else
2691 /* Call legacy weak Rx complete callback */
2692 HAL_SMARTCARD_RxCpltCallback(hsmartcard);
2693 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
2694 }
2695
2696 /**
2697 * @brief DMA SMARTCARD communication error callback.
2698 * @param hdma Pointer to a DMA_HandleTypeDef structure that contains
2699 * the configuration information for the specified DMA module.
2700 * @retval None
2701 */
SMARTCARD_DMAError(DMA_HandleTypeDef * hdma)2702 static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma)
2703 {
2704 SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
2705
2706 /* Stop SMARTCARD DMA Tx request if ongoing */
2707 if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX)
2708 {
2709 if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAT))
2710 {
2711 hsmartcard->TxXferCount = 0U;
2712 SMARTCARD_EndTxTransfer(hsmartcard);
2713 }
2714 }
2715
2716 /* Stop SMARTCARD DMA Rx request if ongoing */
2717 if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX)
2718 {
2719 if (HAL_IS_BIT_SET(hsmartcard->Instance->CR3, USART_CR3_DMAR))
2720 {
2721 hsmartcard->RxXferCount = 0U;
2722 SMARTCARD_EndRxTransfer(hsmartcard);
2723 }
2724 }
2725
2726 hsmartcard->ErrorCode |= HAL_SMARTCARD_ERROR_DMA;
2727 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2728 /* Call registered user error callback */
2729 hsmartcard->ErrorCallback(hsmartcard);
2730 #else
2731 /* Call legacy weak user error callback */
2732 HAL_SMARTCARD_ErrorCallback(hsmartcard);
2733 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
2734 }
2735
2736 /**
2737 * @brief DMA SMARTCARD communication abort callback, when initiated by HAL services on Error
2738 * (To be called at end of DMA Abort procedure following error occurrence).
2739 * @param hdma DMA handle.
2740 * @retval None
2741 */
SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef * hdma)2742 static void SMARTCARD_DMAAbortOnError(DMA_HandleTypeDef *hdma)
2743 {
2744 SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
2745 hsmartcard->RxXferCount = 0U;
2746 hsmartcard->TxXferCount = 0U;
2747
2748 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2749 /* Call registered user error callback */
2750 hsmartcard->ErrorCallback(hsmartcard);
2751 #else
2752 /* Call legacy weak user error callback */
2753 HAL_SMARTCARD_ErrorCallback(hsmartcard);
2754 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
2755 }
2756
2757 /**
2758 * @brief DMA SMARTCARD Tx communication abort callback, when initiated by user
2759 * (To be called at end of DMA Tx Abort procedure following user abort request).
2760 * @note When this callback is executed, User Abort complete call back is called only if no
2761 * Abort still ongoing for Rx DMA Handle.
2762 * @param hdma DMA handle.
2763 * @retval None
2764 */
SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef * hdma)2765 static void SMARTCARD_DMATxAbortCallback(DMA_HandleTypeDef *hdma)
2766 {
2767 SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
2768
2769 hsmartcard->hdmatx->XferAbortCallback = NULL;
2770
2771 /* Check if an Abort process is still ongoing */
2772 if (hsmartcard->hdmarx != NULL)
2773 {
2774 if (hsmartcard->hdmarx->XferAbortCallback != NULL)
2775 {
2776 return;
2777 }
2778 }
2779
2780 /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */
2781 hsmartcard->TxXferCount = 0U;
2782 hsmartcard->RxXferCount = 0U;
2783
2784 /* Reset errorCode */
2785 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
2786
2787 /* Clear the Error flags in the ICR register */
2788 __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
2789 SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
2790 SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
2791
2792 /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
2793 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
2794 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
2795
2796 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2797 /* Call registered Abort complete callback */
2798 hsmartcard->AbortCpltCallback(hsmartcard);
2799 #else
2800 /* Call legacy weak Abort complete callback */
2801 HAL_SMARTCARD_AbortCpltCallback(hsmartcard);
2802 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
2803 }
2804
2805
2806 /**
2807 * @brief DMA SMARTCARD Rx communication abort callback, when initiated by user
2808 * (To be called at end of DMA Rx Abort procedure following user abort request).
2809 * @note When this callback is executed, User Abort complete call back is called only if no
2810 * Abort still ongoing for Tx DMA Handle.
2811 * @param hdma DMA handle.
2812 * @retval None
2813 */
SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef * hdma)2814 static void SMARTCARD_DMARxAbortCallback(DMA_HandleTypeDef *hdma)
2815 {
2816 SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
2817
2818 hsmartcard->hdmarx->XferAbortCallback = NULL;
2819
2820 /* Check if an Abort process is still ongoing */
2821 if (hsmartcard->hdmatx != NULL)
2822 {
2823 if (hsmartcard->hdmatx->XferAbortCallback != NULL)
2824 {
2825 return;
2826 }
2827 }
2828
2829 /* No Abort process still ongoing : All DMA channels are aborted, call user Abort Complete callback */
2830 hsmartcard->TxXferCount = 0U;
2831 hsmartcard->RxXferCount = 0U;
2832
2833 /* Reset errorCode */
2834 hsmartcard->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
2835
2836 /* Clear the Error flags in the ICR register */
2837 __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
2838 SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
2839 SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
2840
2841 /* Restore hsmartcard->gState and hsmartcard->RxState to Ready */
2842 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
2843 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
2844
2845 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2846 /* Call registered Abort complete callback */
2847 hsmartcard->AbortCpltCallback(hsmartcard);
2848 #else
2849 /* Call legacy weak Abort complete callback */
2850 HAL_SMARTCARD_AbortCpltCallback(hsmartcard);
2851 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
2852 }
2853
2854
2855 /**
2856 * @brief DMA SMARTCARD Tx communication abort callback, when initiated by user by a call to
2857 * HAL_SMARTCARD_AbortTransmit_IT API (Abort only Tx transfer)
2858 * (This callback is executed at end of DMA Tx Abort procedure following user abort request,
2859 * and leads to user Tx Abort Complete callback execution).
2860 * @param hdma DMA handle.
2861 * @retval None
2862 */
SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef * hdma)2863 static void SMARTCARD_DMATxOnlyAbortCallback(DMA_HandleTypeDef *hdma)
2864 {
2865 SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
2866
2867 hsmartcard->TxXferCount = 0U;
2868
2869 /* Clear the Error flags in the ICR register */
2870 __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard, SMARTCARD_CLEAR_FEF);
2871
2872 /* Restore hsmartcard->gState to Ready */
2873 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
2874
2875 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2876 /* Call registered Abort Transmit Complete Callback */
2877 hsmartcard->AbortTransmitCpltCallback(hsmartcard);
2878 #else
2879 /* Call legacy weak Abort Transmit Complete Callback */
2880 HAL_SMARTCARD_AbortTransmitCpltCallback(hsmartcard);
2881 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
2882 }
2883
2884 /**
2885 * @brief DMA SMARTCARD Rx communication abort callback, when initiated by user by a call to
2886 * HAL_SMARTCARD_AbortReceive_IT API (Abort only Rx transfer)
2887 * (This callback is executed at end of DMA Rx Abort procedure following user abort request,
2888 * and leads to user Rx Abort Complete callback execution).
2889 * @param hdma DMA handle.
2890 * @retval None
2891 */
SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef * hdma)2892 static void SMARTCARD_DMARxOnlyAbortCallback(DMA_HandleTypeDef *hdma)
2893 {
2894 SMARTCARD_HandleTypeDef *hsmartcard = (SMARTCARD_HandleTypeDef *)(hdma->Parent);
2895
2896 hsmartcard->RxXferCount = 0U;
2897
2898 /* Clear the Error flags in the ICR register */
2899 __HAL_SMARTCARD_CLEAR_FLAG(hsmartcard,
2900 SMARTCARD_CLEAR_OREF | SMARTCARD_CLEAR_NEF | SMARTCARD_CLEAR_PEF | SMARTCARD_CLEAR_FEF |
2901 SMARTCARD_CLEAR_RTOF | SMARTCARD_CLEAR_EOBF);
2902
2903 /* Restore hsmartcard->RxState to Ready */
2904 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
2905
2906 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
2907 /* Call registered Abort Receive Complete Callback */
2908 hsmartcard->AbortReceiveCpltCallback(hsmartcard);
2909 #else
2910 /* Call legacy weak Abort Receive Complete Callback */
2911 HAL_SMARTCARD_AbortReceiveCpltCallback(hsmartcard);
2912 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
2913 }
2914
2915 /**
2916 * @brief Send an amount of data in non-blocking mode.
2917 * @note Function called under interruption only, once
2918 * interruptions have been enabled by HAL_SMARTCARD_Transmit_IT()
2919 * and when the FIFO mode is disabled.
2920 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2921 * the configuration information for the specified SMARTCARD module.
2922 * @retval None
2923 */
SMARTCARD_TxISR(SMARTCARD_HandleTypeDef * hsmartcard)2924 static void SMARTCARD_TxISR(SMARTCARD_HandleTypeDef *hsmartcard)
2925 {
2926 /* Check that a Tx process is ongoing */
2927 if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX)
2928 {
2929 if (hsmartcard->TxXferCount == 0U)
2930 {
2931 /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */
2932 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE);
2933
2934 /* Enable the SMARTCARD Transmit Complete Interrupt */
2935 __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication);
2936 }
2937 else
2938 {
2939 hsmartcard->Instance->TDR = (uint8_t)(*hsmartcard->pTxBuffPtr & 0xFFU);
2940 hsmartcard->pTxBuffPtr++;
2941 hsmartcard->TxXferCount--;
2942 }
2943 }
2944 }
2945
2946 /**
2947 * @brief Send an amount of data in non-blocking mode.
2948 * @note Function called under interruption only, once
2949 * interruptions have been enabled by HAL_SMARTCARD_Transmit_IT()
2950 * and when the FIFO mode is enabled.
2951 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2952 * the configuration information for the specified SMARTCARD module.
2953 * @retval None
2954 */
SMARTCARD_TxISR_FIFOEN(SMARTCARD_HandleTypeDef * hsmartcard)2955 static void SMARTCARD_TxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard)
2956 {
2957 uint16_t nb_tx_data;
2958
2959 /* Check that a Tx process is ongoing */
2960 if (hsmartcard->gState == HAL_SMARTCARD_STATE_BUSY_TX)
2961 {
2962 for (nb_tx_data = hsmartcard->NbTxDataToProcess ; nb_tx_data > 0U ; nb_tx_data--)
2963 {
2964 if (hsmartcard->TxXferCount == 0U)
2965 {
2966 /* Disable the SMARTCARD Transmit Data Register Empty Interrupt */
2967 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_TXEIE_TXFNFIE);
2968
2969 /* Enable the SMARTCARD Transmit Complete Interrupt */
2970 __HAL_SMARTCARD_ENABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication);
2971 }
2972 else if (READ_BIT(hsmartcard->Instance->ISR, USART_ISR_TXE_TXFNF) != 0U)
2973 {
2974 hsmartcard->Instance->TDR = (uint8_t)(*hsmartcard->pTxBuffPtr & 0xFFU);
2975 hsmartcard->pTxBuffPtr++;
2976 hsmartcard->TxXferCount--;
2977 }
2978 else
2979 {
2980 /* Nothing to do */
2981 }
2982 }
2983 }
2984 }
2985
2986 /**
2987 * @brief Wrap up transmission in non-blocking mode.
2988 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
2989 * the configuration information for the specified SMARTCARD module.
2990 * @retval None
2991 */
SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef * hsmartcard)2992 static void SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
2993 {
2994 /* Disable the SMARTCARD Transmit Complete Interrupt */
2995 __HAL_SMARTCARD_DISABLE_IT(hsmartcard, hsmartcard->AdvancedInit.TxCompletionIndication);
2996
2997 /* Check if a receive process is ongoing or not. If not disable ERR IT */
2998 if (hsmartcard->RxState == HAL_SMARTCARD_STATE_READY)
2999 {
3000 /* Disable the SMARTCARD Error Interrupt: (Frame error) */
3001 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
3002 }
3003
3004 /* Disable the Peripheral first to update mode */
3005 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
3006 if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX)
3007 && (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
3008 {
3009 /* In case of TX only mode, if NACK is enabled, receiver block has been enabled
3010 for Transmit phase. Disable this receiver block. */
3011 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RE);
3012 }
3013 if ((hsmartcard->Init.Mode == SMARTCARD_MODE_TX_RX)
3014 || (hsmartcard->Init.NACKEnable == SMARTCARD_NACK_ENABLE))
3015 {
3016 /* Perform a TX FIFO Flush at end of Tx phase, as all sent bytes are appearing in Rx Data register */
3017 __HAL_SMARTCARD_FLUSH_DRREGISTER(hsmartcard);
3018 }
3019 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_UE);
3020
3021 /* Tx process is ended, restore hsmartcard->gState to Ready */
3022 hsmartcard->gState = HAL_SMARTCARD_STATE_READY;
3023
3024 /* Clear TxISR function pointer */
3025 hsmartcard->TxISR = NULL;
3026
3027 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
3028 /* Call registered Tx complete callback */
3029 hsmartcard->TxCpltCallback(hsmartcard);
3030 #else
3031 /* Call legacy weak Tx complete callback */
3032 HAL_SMARTCARD_TxCpltCallback(hsmartcard);
3033 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
3034 }
3035
3036 /**
3037 * @brief Receive an amount of data in non-blocking mode.
3038 * @note Function called under interruption only, once
3039 * interruptions have been enabled by HAL_SMARTCARD_Receive_IT()
3040 * and when the FIFO mode is disabled.
3041 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
3042 * the configuration information for the specified SMARTCARD module.
3043 * @retval None
3044 */
SMARTCARD_RxISR(SMARTCARD_HandleTypeDef * hsmartcard)3045 static void SMARTCARD_RxISR(SMARTCARD_HandleTypeDef *hsmartcard)
3046 {
3047 /* Check that a Rx process is ongoing */
3048 if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX)
3049 {
3050 *hsmartcard->pRxBuffPtr = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF);
3051 hsmartcard->pRxBuffPtr++;
3052
3053 hsmartcard->RxXferCount--;
3054 if (hsmartcard->RxXferCount == 0U)
3055 {
3056 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE);
3057
3058 /* Check if a transmit process is ongoing or not. If not disable ERR IT */
3059 if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
3060 {
3061 /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
3062 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
3063 }
3064
3065 /* Disable the SMARTCARD Parity Error Interrupt */
3066 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE);
3067
3068 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
3069
3070 /* Clear RxISR function pointer */
3071 hsmartcard->RxISR = NULL;
3072
3073 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
3074 /* Call registered Rx complete callback */
3075 hsmartcard->RxCpltCallback(hsmartcard);
3076 #else
3077 /* Call legacy weak Rx complete callback */
3078 HAL_SMARTCARD_RxCpltCallback(hsmartcard);
3079 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
3080 }
3081 }
3082 else
3083 {
3084 /* Clear RXNE interrupt flag */
3085 __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST);
3086 }
3087 }
3088
3089 /**
3090 * @brief Receive an amount of data in non-blocking mode.
3091 * @note Function called under interruption only, once
3092 * interruptions have been enabled by HAL_SMARTCARD_Receive_IT()
3093 * and when the FIFO mode is enabled.
3094 * @param hsmartcard Pointer to a SMARTCARD_HandleTypeDef structure that contains
3095 * the configuration information for the specified SMARTCARD module.
3096 * @retval None
3097 */
SMARTCARD_RxISR_FIFOEN(SMARTCARD_HandleTypeDef * hsmartcard)3098 static void SMARTCARD_RxISR_FIFOEN(SMARTCARD_HandleTypeDef *hsmartcard)
3099 {
3100 uint16_t nb_rx_data;
3101 uint16_t rxdatacount;
3102
3103 /* Check that a Rx process is ongoing */
3104 if (hsmartcard->RxState == HAL_SMARTCARD_STATE_BUSY_RX)
3105 {
3106 for (nb_rx_data = hsmartcard->NbRxDataToProcess ; nb_rx_data > 0U ; nb_rx_data--)
3107 {
3108 *hsmartcard->pRxBuffPtr = (uint8_t)(hsmartcard->Instance->RDR & (uint8_t)0xFF);
3109 hsmartcard->pRxBuffPtr++;
3110
3111 hsmartcard->RxXferCount--;
3112 if (hsmartcard->RxXferCount == 0U)
3113 {
3114 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE);
3115
3116 /* Check if a transmit process is ongoing or not. If not disable ERR IT */
3117 if (hsmartcard->gState == HAL_SMARTCARD_STATE_READY)
3118 {
3119 /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
3120 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_EIE);
3121 }
3122
3123 /* Disable the SMARTCARD Parity Error Interrupt */
3124 CLEAR_BIT(hsmartcard->Instance->CR1, USART_CR1_PEIE);
3125
3126 hsmartcard->RxState = HAL_SMARTCARD_STATE_READY;
3127
3128 /* Clear RxISR function pointer */
3129 hsmartcard->RxISR = NULL;
3130
3131 #if (USE_HAL_SMARTCARD_REGISTER_CALLBACKS == 1)
3132 /* Call registered Rx complete callback */
3133 hsmartcard->RxCpltCallback(hsmartcard);
3134 #else
3135 /* Call legacy weak Rx complete callback */
3136 HAL_SMARTCARD_RxCpltCallback(hsmartcard);
3137 #endif /* USE_HAL_SMARTCARD_REGISTER_CALLBACK */
3138 }
3139 }
3140
3141 /* When remaining number of bytes to receive is less than the RX FIFO
3142 threshold, next incoming frames are processed as if FIFO mode was
3143 disabled (i.e. one interrupt per received frame).
3144 */
3145 rxdatacount = hsmartcard->RxXferCount;
3146 if (((rxdatacount != 0U)) && (rxdatacount < hsmartcard->NbRxDataToProcess))
3147 {
3148 /* Disable the UART RXFT interrupt*/
3149 CLEAR_BIT(hsmartcard->Instance->CR3, USART_CR3_RXFTIE);
3150
3151 /* Update the RxISR function pointer */
3152 hsmartcard->RxISR = SMARTCARD_RxISR;
3153
3154 /* Enable the UART Data Register Not Empty interrupt */
3155 SET_BIT(hsmartcard->Instance->CR1, USART_CR1_RXNEIE_RXFNEIE);
3156 }
3157 }
3158 else
3159 {
3160 /* Clear RXNE interrupt flag */
3161 __HAL_SMARTCARD_SEND_REQ(hsmartcard, SMARTCARD_RXDATA_FLUSH_REQUEST);
3162 }
3163 }
3164
3165 /**
3166 * @}
3167 */
3168
3169 #endif /* HAL_SMARTCARD_MODULE_ENABLED */
3170 /**
3171 * @}
3172 */
3173
3174 /**
3175 * @}
3176 */
3177
3178
