1 /** 2 ****************************************************************************** 3 * @file stm32g4xx_hal_i2s.h 4 * @author MCD Application Team 5 * @brief Header file of I2S HAL module. 6 ****************************************************************************** 7 * @attention 8 * 9 * <h2><center>© Copyright (c) 2019 STMicroelectronics. 10 * All rights reserved.</center></h2> 11 * 12 * This software component is licensed by ST under BSD 3-Clause license, 13 * the "License"; You may not use this file except in compliance with the 14 * License. You may obtain a copy of the License at: 15 * opensource.org/licenses/BSD-3-Clause 16 * 17 ****************************************************************************** 18 */ 19 20 /* Define to prevent recursive inclusion -------------------------------------*/ 21 #ifndef STM32G4xx_HAL_I2S_H 22 #define STM32G4xx_HAL_I2S_H 23 24 #ifdef __cplusplus 25 extern "C" { 26 #endif 27 28 /* Includes ------------------------------------------------------------------*/ 29 #include "stm32g4xx_hal_def.h" 30 31 #if defined(SPI_I2S_SUPPORT) 32 /** @addtogroup STM32G4xx_HAL_Driver 33 * @{ 34 */ 35 36 /** @addtogroup I2S 37 * @{ 38 */ 39 40 /* Exported types ------------------------------------------------------------*/ 41 /** @defgroup I2S_Exported_Types I2S Exported Types 42 * @{ 43 */ 44 45 /** 46 * @brief I2S Init structure definition 47 */ 48 typedef struct 49 { 50 uint32_t Mode; /*!< Specifies the I2S operating mode. 51 This parameter can be a value of @ref I2S_Mode */ 52 53 uint32_t Standard; /*!< Specifies the standard used for the I2S communication. 54 This parameter can be a value of @ref I2S_Standard */ 55 56 uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. 57 This parameter can be a value of @ref I2S_Data_Format */ 58 59 uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. 60 This parameter can be a value of @ref I2S_MCLK_Output */ 61 62 uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. 63 This parameter can be a value of @ref I2S_Audio_Frequency */ 64 65 uint32_t CPOL; /*!< Specifies the idle state of the I2S clock. 66 This parameter can be a value of @ref I2S_Clock_Polarity */ 67 } I2S_InitTypeDef; 68 69 /** 70 * @brief HAL State structures definition 71 */ 72 typedef enum 73 { 74 HAL_I2S_STATE_RESET = 0x00U, /*!< I2S not yet initialized or disabled */ 75 HAL_I2S_STATE_READY = 0x01U, /*!< I2S initialized and ready for use */ 76 HAL_I2S_STATE_BUSY = 0x02U, /*!< I2S internal process is ongoing */ 77 HAL_I2S_STATE_BUSY_TX = 0x03U, /*!< Data Transmission process is ongoing */ 78 HAL_I2S_STATE_BUSY_RX = 0x04U, /*!< Data Reception process is ongoing */ 79 HAL_I2S_STATE_TIMEOUT = 0x06U, /*!< I2S timeout state */ 80 HAL_I2S_STATE_ERROR = 0x07U /*!< I2S error state */ 81 } HAL_I2S_StateTypeDef; 82 83 /** 84 * @brief I2S handle Structure definition 85 */ 86 #if (USE_HAL_I2S_REGISTER_CALLBACKS == 1) 87 typedef struct __I2S_HandleTypeDef 88 #else 89 typedef struct 90 #endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ 91 { 92 SPI_TypeDef *Instance; /*!< I2S registers base address */ 93 94 I2S_InitTypeDef Init; /*!< I2S communication parameters */ 95 96 uint16_t *pTxBuffPtr; /*!< Pointer to I2S Tx transfer buffer */ 97 98 __IO uint16_t TxXferSize; /*!< I2S Tx transfer size */ 99 100 __IO uint16_t TxXferCount; /*!< I2S Tx transfer Counter */ 101 102 uint16_t *pRxBuffPtr; /*!< Pointer to I2S Rx transfer buffer */ 103 104 __IO uint16_t RxXferSize; /*!< I2S Rx transfer size */ 105 106 __IO uint16_t RxXferCount; /*!< I2S Rx transfer counter 107 (This field is initialized at the 108 same value as transfer size at the 109 beginning of the transfer and 110 decremented when a sample is received 111 NbSamplesReceived = RxBufferSize-RxBufferCount) */ 112 DMA_HandleTypeDef *hdmatx; /*!< I2S Tx DMA handle parameters */ 113 114 DMA_HandleTypeDef *hdmarx; /*!< I2S Rx DMA handle parameters */ 115 116 __IO HAL_LockTypeDef Lock; /*!< I2S locking object */ 117 118 __IO HAL_I2S_StateTypeDef State; /*!< I2S communication state */ 119 120 __IO uint32_t ErrorCode; /*!< I2S Error code 121 This parameter can be a value of @ref I2S_Error */ 122 123 #if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) 124 void (* TxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Completed callback */ 125 void (* RxCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Completed callback */ 126 void (* TxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Tx Half Completed callback */ 127 void (* RxHalfCpltCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Rx Half Completed callback */ 128 void (* ErrorCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Error callback */ 129 void (* MspInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp Init callback */ 130 void (* MspDeInitCallback)(struct __I2S_HandleTypeDef *hi2s); /*!< I2S Msp DeInit callback */ 131 132 #endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ 133 } I2S_HandleTypeDef; 134 135 #if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) 136 /** 137 * @brief HAL I2S Callback ID enumeration definition 138 */ 139 typedef enum 140 { 141 HAL_I2S_TX_COMPLETE_CB_ID = 0x00U, /*!< I2S Tx Completed callback ID */ 142 HAL_I2S_RX_COMPLETE_CB_ID = 0x01U, /*!< I2S Rx Completed callback ID */ 143 HAL_I2S_TX_HALF_COMPLETE_CB_ID = 0x03U, /*!< I2S Tx Half Completed callback ID */ 144 HAL_I2S_RX_HALF_COMPLETE_CB_ID = 0x04U, /*!< I2S Rx Half Completed callback ID */ 145 HAL_I2S_ERROR_CB_ID = 0x06U, /*!< I2S Error callback ID */ 146 HAL_I2S_MSPINIT_CB_ID = 0x07U, /*!< I2S Msp Init callback ID */ 147 HAL_I2S_MSPDEINIT_CB_ID = 0x08U /*!< I2S Msp DeInit callback ID */ 148 149 } HAL_I2S_CallbackIDTypeDef; 150 151 /** 152 * @brief HAL I2S Callback pointer definition 153 */ 154 typedef void (*pI2S_CallbackTypeDef)(I2S_HandleTypeDef *hi2s); /*!< pointer to an I2S callback function */ 155 156 #endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ 157 /** 158 * @} 159 */ 160 161 /* Exported constants --------------------------------------------------------*/ 162 /** @defgroup I2S_Exported_Constants I2S Exported Constants 163 * @{ 164 */ 165 /** @defgroup I2S_Error I2S Error 166 * @{ 167 */ 168 #define HAL_I2S_ERROR_NONE (0x00000000U) /*!< No error */ 169 #define HAL_I2S_ERROR_TIMEOUT (0x00000001U) /*!< Timeout error */ 170 #define HAL_I2S_ERROR_OVR (0x00000002U) /*!< OVR error */ 171 #define HAL_I2S_ERROR_UDR (0x00000004U) /*!< UDR error */ 172 #define HAL_I2S_ERROR_DMA (0x00000008U) /*!< DMA transfer error */ 173 #define HAL_I2S_ERROR_PRESCALER (0x00000010U) /*!< Prescaler Calculation error */ 174 #if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) 175 #define HAL_I2S_ERROR_INVALID_CALLBACK (0x00000020U) /*!< Invalid Callback error */ 176 #endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ 177 #define HAL_I2S_ERROR_BUSY_LINE_RX (0x00000040U) /*!< Busy Rx Line error */ 178 /** 179 * @} 180 */ 181 182 /** @defgroup I2S_Mode I2S Mode 183 * @{ 184 */ 185 #define I2S_MODE_SLAVE_TX (0x00000000U) 186 #define I2S_MODE_SLAVE_RX (SPI_I2SCFGR_I2SCFG_0) 187 #define I2S_MODE_MASTER_TX (SPI_I2SCFGR_I2SCFG_1) 188 #define I2S_MODE_MASTER_RX ((SPI_I2SCFGR_I2SCFG_0 | SPI_I2SCFGR_I2SCFG_1)) 189 /** 190 * @} 191 */ 192 193 /** @defgroup I2S_Standard I2S Standard 194 * @{ 195 */ 196 #define I2S_STANDARD_PHILIPS (0x00000000U) 197 #define I2S_STANDARD_MSB (SPI_I2SCFGR_I2SSTD_0) 198 #define I2S_STANDARD_LSB (SPI_I2SCFGR_I2SSTD_1) 199 #define I2S_STANDARD_PCM_SHORT ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1)) 200 #define I2S_STANDARD_PCM_LONG ((SPI_I2SCFGR_I2SSTD_0 | SPI_I2SCFGR_I2SSTD_1 | SPI_I2SCFGR_PCMSYNC)) 201 /** 202 * @} 203 */ 204 205 /** @defgroup I2S_Data_Format I2S Data Format 206 * @{ 207 */ 208 #define I2S_DATAFORMAT_16B (0x00000000U) 209 #define I2S_DATAFORMAT_16B_EXTENDED (SPI_I2SCFGR_CHLEN) 210 #define I2S_DATAFORMAT_24B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_0)) 211 #define I2S_DATAFORMAT_32B ((SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN_1)) 212 /** 213 * @} 214 */ 215 216 /** @defgroup I2S_MCLK_Output I2S MCLK Output 217 * @{ 218 */ 219 #define I2S_MCLKOUTPUT_ENABLE (SPI_I2SPR_MCKOE) 220 #define I2S_MCLKOUTPUT_DISABLE (0x00000000U) 221 /** 222 * @} 223 */ 224 225 /** @defgroup I2S_Audio_Frequency I2S Audio Frequency 226 * @{ 227 */ 228 #define I2S_AUDIOFREQ_192K (192000U) 229 #define I2S_AUDIOFREQ_96K (96000U) 230 #define I2S_AUDIOFREQ_48K (48000U) 231 #define I2S_AUDIOFREQ_44K (44100U) 232 #define I2S_AUDIOFREQ_32K (32000U) 233 #define I2S_AUDIOFREQ_22K (22050U) 234 #define I2S_AUDIOFREQ_16K (16000U) 235 #define I2S_AUDIOFREQ_11K (11025U) 236 #define I2S_AUDIOFREQ_8K (8000U) 237 #define I2S_AUDIOFREQ_DEFAULT (2U) 238 /** 239 * @} 240 */ 241 242 /** @defgroup I2S_Clock_Polarity I2S Clock Polarity 243 * @{ 244 */ 245 #define I2S_CPOL_LOW (0x00000000U) 246 #define I2S_CPOL_HIGH (SPI_I2SCFGR_CKPOL) 247 /** 248 * @} 249 */ 250 251 /** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition 252 * @{ 253 */ 254 #define I2S_IT_TXE SPI_CR2_TXEIE 255 #define I2S_IT_RXNE SPI_CR2_RXNEIE 256 #define I2S_IT_ERR SPI_CR2_ERRIE 257 /** 258 * @} 259 */ 260 261 /** @defgroup I2S_Flags_Definition I2S Flags Definition 262 * @{ 263 */ 264 #define I2S_FLAG_TXE SPI_SR_TXE 265 #define I2S_FLAG_RXNE SPI_SR_RXNE 266 267 #define I2S_FLAG_UDR SPI_SR_UDR 268 #define I2S_FLAG_OVR SPI_SR_OVR 269 #define I2S_FLAG_FRE SPI_SR_FRE 270 271 #define I2S_FLAG_CHSIDE SPI_SR_CHSIDE 272 #define I2S_FLAG_BSY SPI_SR_BSY 273 274 #define I2S_FLAG_MASK (SPI_SR_RXNE\ 275 | SPI_SR_TXE | SPI_SR_UDR | SPI_SR_OVR | SPI_SR_FRE | SPI_SR_CHSIDE | SPI_SR_BSY) 276 /** 277 * @} 278 */ 279 280 /** 281 * @} 282 */ 283 284 /* Exported macros -----------------------------------------------------------*/ 285 /** @defgroup I2S_Exported_macros I2S Exported Macros 286 * @{ 287 */ 288 289 /** @brief Reset I2S handle state 290 * @param __HANDLE__ specifies the I2S Handle. 291 * @retval None 292 */ 293 #if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) 294 #define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) do{ \ 295 (__HANDLE__)->State = HAL_I2S_STATE_RESET; \ 296 (__HANDLE__)->MspInitCallback = NULL; \ 297 (__HANDLE__)->MspDeInitCallback = NULL; \ 298 } while(0) 299 #else 300 #define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET) 301 #endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ 302 303 /** @brief Enable the specified SPI peripheral (in I2S mode). 304 * @param __HANDLE__ specifies the I2S Handle. 305 * @retval None 306 */ 307 #define __HAL_I2S_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) 308 309 /** @brief Disable the specified SPI peripheral (in I2S mode). 310 * @param __HANDLE__ specifies the I2S Handle. 311 * @retval None 312 */ 313 #define __HAL_I2S_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->I2SCFGR, SPI_I2SCFGR_I2SE)) 314 315 /** @brief Enable the specified I2S interrupts. 316 * @param __HANDLE__ specifies the I2S Handle. 317 * @param __INTERRUPT__ specifies the interrupt source to enable or disable. 318 * This parameter can be one of the following values: 319 * @arg I2S_IT_TXE: Tx buffer empty interrupt enable 320 * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable 321 * @arg I2S_IT_ERR: Error interrupt enable 322 * @retval None 323 */ 324 #define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) (SET_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) 325 326 /** @brief Disable the specified I2S interrupts. 327 * @param __HANDLE__ specifies the I2S Handle. 328 * @param __INTERRUPT__ specifies the interrupt source to enable or disable. 329 * This parameter can be one of the following values: 330 * @arg I2S_IT_TXE: Tx buffer empty interrupt enable 331 * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable 332 * @arg I2S_IT_ERR: Error interrupt enable 333 * @retval None 334 */ 335 #define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) (CLEAR_BIT((__HANDLE__)->Instance->CR2,(__INTERRUPT__))) 336 337 /** @brief Checks if the specified I2S interrupt source is enabled or disabled. 338 * @param __HANDLE__ specifies the I2S Handle. 339 * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral. 340 * @param __INTERRUPT__ specifies the I2S interrupt source to check. 341 * This parameter can be one of the following values: 342 * @arg I2S_IT_TXE: Tx buffer empty interrupt enable 343 * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable 344 * @arg I2S_IT_ERR: Error interrupt enable 345 * @retval The new state of __IT__ (TRUE or FALSE). 346 */ 347 #define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2\ 348 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) 349 350 /** @brief Checks whether the specified I2S flag is set or not. 351 * @param __HANDLE__ specifies the I2S Handle. 352 * @param __FLAG__ specifies the flag to check. 353 * This parameter can be one of the following values: 354 * @arg I2S_FLAG_RXNE: Receive buffer not empty flag 355 * @arg I2S_FLAG_TXE: Transmit buffer empty flag 356 * @arg I2S_FLAG_UDR: Underrun flag 357 * @arg I2S_FLAG_OVR: Overrun flag 358 * @arg I2S_FLAG_FRE: Frame error flag 359 * @arg I2S_FLAG_CHSIDE: Channel Side flag 360 * @arg I2S_FLAG_BSY: Busy flag 361 * @retval The new state of __FLAG__ (TRUE or FALSE). 362 */ 363 #define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) 364 365 /** @brief Clears the I2S OVR pending flag. 366 * @param __HANDLE__ specifies the I2S Handle. 367 * @retval None 368 */ 369 #define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) do{ \ 370 __IO uint32_t tmpreg_ovr = 0x00U; \ 371 tmpreg_ovr = (__HANDLE__)->Instance->DR; \ 372 tmpreg_ovr = (__HANDLE__)->Instance->SR; \ 373 UNUSED(tmpreg_ovr); \ 374 }while(0U) 375 /** @brief Clears the I2S UDR pending flag. 376 * @param __HANDLE__ specifies the I2S Handle. 377 * @retval None 378 */ 379 #define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) do{\ 380 __IO uint32_t tmpreg_udr = 0x00U;\ 381 tmpreg_udr = ((__HANDLE__)->Instance->SR);\ 382 UNUSED(tmpreg_udr); \ 383 }while(0U) 384 /** @brief Flush the I2S DR Register. 385 * @param __HANDLE__ specifies the I2S Handle. 386 * @retval None 387 */ 388 #define __HAL_I2S_FLUSH_RX_DR(__HANDLE__) do{\ 389 __IO uint32_t tmpreg_dr = 0x00U;\ 390 tmpreg_dr = ((__HANDLE__)->Instance->DR);\ 391 UNUSED(tmpreg_dr); \ 392 }while(0U) 393 /** 394 * @} 395 */ 396 397 /* Exported functions --------------------------------------------------------*/ 398 /** @addtogroup I2S_Exported_Functions 399 * @{ 400 */ 401 402 /** @addtogroup I2S_Exported_Functions_Group1 403 * @{ 404 */ 405 /* Initialization/de-initialization functions ********************************/ 406 HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s); 407 HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s); 408 void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s); 409 void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s); 410 411 /* Callbacks Register/UnRegister functions ***********************************/ 412 #if (USE_HAL_I2S_REGISTER_CALLBACKS == 1U) 413 HAL_StatusTypeDef HAL_I2S_RegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID, 414 pI2S_CallbackTypeDef pCallback); 415 HAL_StatusTypeDef HAL_I2S_UnRegisterCallback(I2S_HandleTypeDef *hi2s, HAL_I2S_CallbackIDTypeDef CallbackID); 416 #endif /* USE_HAL_I2S_REGISTER_CALLBACKS */ 417 /** 418 * @} 419 */ 420 421 /** @addtogroup I2S_Exported_Functions_Group2 422 * @{ 423 */ 424 /* I/O operation functions ***************************************************/ 425 /* Blocking mode: Polling */ 426 HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); 427 HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); 428 429 /* Non-Blocking mode: Interrupt */ 430 HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); 431 HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); 432 void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s); 433 434 /* Non-Blocking mode: DMA */ 435 HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); 436 HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); 437 438 HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s); 439 HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s); 440 HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s); 441 442 /* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ 443 void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s); 444 void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s); 445 void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s); 446 void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s); 447 void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s); 448 /** 449 * @} 450 */ 451 452 /** @addtogroup I2S_Exported_Functions_Group3 453 * @{ 454 */ 455 /* Peripheral Control and State functions ************************************/ 456 HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s); 457 uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s); 458 /** 459 * @} 460 */ 461 462 /** 463 * @} 464 */ 465 466 /* Private types -------------------------------------------------------------*/ 467 /* Private variables ---------------------------------------------------------*/ 468 /* Private constants ---------------------------------------------------------*/ 469 /* Private macros ------------------------------------------------------------*/ 470 /** @defgroup I2S_Private_Macros I2S Private Macros 471 * @{ 472 */ 473 474 /** @brief Check whether the specified SPI flag is set or not. 475 * @param __SR__ copy of I2S SR register. 476 * @param __FLAG__ specifies the flag to check. 477 * This parameter can be one of the following values: 478 * @arg I2S_FLAG_RXNE: Receive buffer not empty flag 479 * @arg I2S_FLAG_TXE: Transmit buffer empty flag 480 * @arg I2S_FLAG_UDR: Underrun error flag 481 * @arg I2S_FLAG_OVR: Overrun flag 482 * @arg I2S_FLAG_CHSIDE: Channel side flag 483 * @arg I2S_FLAG_BSY: Busy flag 484 * @retval SET or RESET. 485 */ 486 #define I2S_CHECK_FLAG(__SR__, __FLAG__) ((((__SR__)\ 487 & ((__FLAG__) & I2S_FLAG_MASK)) == ((__FLAG__) & I2S_FLAG_MASK)) ? SET : RESET) 488 489 /** @brief Check whether the specified SPI Interrupt is set or not. 490 * @param __CR2__ copy of I2S CR2 register. 491 * @param __INTERRUPT__ specifies the SPI interrupt source to check. 492 * This parameter can be one of the following values: 493 * @arg I2S_IT_TXE: Tx buffer empty interrupt enable 494 * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable 495 * @arg I2S_IT_ERR: Error interrupt enable 496 * @retval SET or RESET. 497 */ 498 #define I2S_CHECK_IT_SOURCE(__CR2__, __INTERRUPT__) ((((__CR2__)\ 499 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) 500 501 /** @brief Checks if I2S Mode parameter is in allowed range. 502 * @param __MODE__ specifies the I2S Mode. 503 * This parameter can be a value of @ref I2S_Mode 504 * @retval None 505 */ 506 #define IS_I2S_MODE(__MODE__) (((__MODE__) == I2S_MODE_SLAVE_TX) || \ 507 ((__MODE__) == I2S_MODE_SLAVE_RX) || \ 508 ((__MODE__) == I2S_MODE_MASTER_TX) || \ 509 ((__MODE__) == I2S_MODE_MASTER_RX)) 510 511 #define IS_I2S_STANDARD(__STANDARD__) (((__STANDARD__) == I2S_STANDARD_PHILIPS) || \ 512 ((__STANDARD__) == I2S_STANDARD_MSB) || \ 513 ((__STANDARD__) == I2S_STANDARD_LSB) || \ 514 ((__STANDARD__) == I2S_STANDARD_PCM_SHORT) || \ 515 ((__STANDARD__) == I2S_STANDARD_PCM_LONG)) 516 517 #define IS_I2S_DATA_FORMAT(__FORMAT__) (((__FORMAT__) == I2S_DATAFORMAT_16B) || \ 518 ((__FORMAT__) == I2S_DATAFORMAT_16B_EXTENDED) || \ 519 ((__FORMAT__) == I2S_DATAFORMAT_24B) || \ 520 ((__FORMAT__) == I2S_DATAFORMAT_32B)) 521 522 #define IS_I2S_MCLK_OUTPUT(__OUTPUT__) (((__OUTPUT__) == I2S_MCLKOUTPUT_ENABLE) || \ 523 ((__OUTPUT__) == I2S_MCLKOUTPUT_DISABLE)) 524 525 #define IS_I2S_AUDIO_FREQ(__FREQ__) ((((__FREQ__) >= I2S_AUDIOFREQ_8K) && \ 526 ((__FREQ__) <= I2S_AUDIOFREQ_192K)) || \ 527 ((__FREQ__) == I2S_AUDIOFREQ_DEFAULT)) 528 529 /** @brief Checks if I2S Serial clock steady state parameter is in allowed range. 530 * @param __CPOL__ specifies the I2S serial clock steady state. 531 * This parameter can be a value of @ref I2S_Clock_Polarity 532 * @retval None 533 */ 534 #define IS_I2S_CPOL(__CPOL__) (((__CPOL__) == I2S_CPOL_LOW) || \ 535 ((__CPOL__) == I2S_CPOL_HIGH)) 536 537 /** 538 * @} 539 */ 540 541 /** 542 * @} 543 */ 544 545 /** 546 * @} 547 */ 548 #endif /* SPI_I2S_SUPPORT */ 549 550 #ifdef __cplusplus 551 } 552 #endif 553 554 #endif /* STM32G4xx_HAL_I2S_H */ 555 556 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ 557
