1 //*****************************************************************************
2 // MK66F18 startup code for use with MCUXpresso IDE
3 //
4 // Version : 160420
5 //*****************************************************************************
6 //
7 // Copyright 2016-2020 NXP
8 // All rights reserved.
9 //
10 // SPDX-License-Identifier: BSD-3-Clause
11 //*****************************************************************************
12
13 #if defined (DEBUG)
14 #pragma GCC push_options
15 #pragma GCC optimize ("Og")
16 #endif // (DEBUG)
17
18 #if defined (__cplusplus)
19 #ifdef __REDLIB__
20 #error Redlib does not support C++
21 #else
22 //*****************************************************************************
23 //
24 // The entry point for the C++ library startup
25 //
26 //*****************************************************************************
27 extern "C" {
28 extern void __libc_init_array(void);
29 }
30 #endif
31 #endif
32
33 #define WEAK __attribute__ ((weak))
34 #define WEAK_AV __attribute__ ((weak, section(".after_vectors")))
35 #define ALIAS(f) __attribute__ ((weak, alias (#f)))
36
37 //*****************************************************************************
38 #if defined (__cplusplus)
39 extern "C" {
40 #endif
41
42 //*****************************************************************************
43 // Flash Configuration block : 16-byte flash configuration field that stores
44 // default protection settings (loaded on reset) and security information that
45 // allows the MCU to restrict access to the Flash Memory module.
46 // Placed at address 0x400 by the linker script.
47 //*****************************************************************************
48 __attribute__ ((used,section(".FlashConfig"))) const struct {
49 unsigned int word1;
50 unsigned int word2;
51 unsigned int word3;
52 unsigned int word4;
53 } Flash_Config = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFE};
54 //*****************************************************************************
55 // Declaration of external SystemInit function
56 //*****************************************************************************
57 #if defined (__USE_CMSIS)
58 extern void SystemInit(void);
59 #endif // (__USE_CMSIS)
60
61 //*****************************************************************************
62 // Forward declaration of the core exception handlers.
63 // When the application defines a handler (with the same name), this will
64 // automatically take precedence over these weak definitions.
65 // If your application is a C++ one, then any interrupt handlers defined
66 // in C++ files within in your main application will need to have C linkage
67 // rather than C++ linkage. To do this, make sure that you are using extern "C"
68 // { .... } around the interrupt handler within your main application code.
69 //*****************************************************************************
70 void ResetISR(void);
71 WEAK void NMI_Handler(void);
72 WEAK void HardFault_Handler(void);
73 WEAK void MemManage_Handler(void);
74 WEAK void BusFault_Handler(void);
75 WEAK void UsageFault_Handler(void);
76 WEAK void SVC_Handler(void);
77 WEAK void DebugMon_Handler(void);
78 WEAK void PendSV_Handler(void);
79 WEAK void SysTick_Handler(void);
80 WEAK void IntDefaultHandler(void);
81
82 //*****************************************************************************
83 // Forward declaration of the application IRQ handlers. When the application
84 // defines a handler (with the same name), this will automatically take
85 // precedence over weak definitions below
86 //*****************************************************************************
87 WEAK void DMA0_DMA16_IRQHandler(void);
88 WEAK void DMA1_DMA17_IRQHandler(void);
89 WEAK void DMA2_DMA18_IRQHandler(void);
90 WEAK void DMA3_DMA19_IRQHandler(void);
91 WEAK void DMA4_DMA20_IRQHandler(void);
92 WEAK void DMA5_DMA21_IRQHandler(void);
93 WEAK void DMA6_DMA22_IRQHandler(void);
94 WEAK void DMA7_DMA23_IRQHandler(void);
95 WEAK void DMA8_DMA24_IRQHandler(void);
96 WEAK void DMA9_DMA25_IRQHandler(void);
97 WEAK void DMA10_DMA26_IRQHandler(void);
98 WEAK void DMA11_DMA27_IRQHandler(void);
99 WEAK void DMA12_DMA28_IRQHandler(void);
100 WEAK void DMA13_DMA29_IRQHandler(void);
101 WEAK void DMA14_DMA30_IRQHandler(void);
102 WEAK void DMA15_DMA31_IRQHandler(void);
103 WEAK void DMA_Error_IRQHandler(void);
104 WEAK void MCM_IRQHandler(void);
105 WEAK void FTFE_IRQHandler(void);
106 WEAK void Read_Collision_IRQHandler(void);
107 WEAK void LVD_LVW_IRQHandler(void);
108 WEAK void LLWU_IRQHandler(void);
109 WEAK void WDOG_EWM_IRQHandler(void);
110 WEAK void RNG_IRQHandler(void);
111 WEAK void I2C0_IRQHandler(void);
112 WEAK void I2C1_IRQHandler(void);
113 WEAK void SPI0_IRQHandler(void);
114 WEAK void SPI1_IRQHandler(void);
115 WEAK void I2S0_Tx_IRQHandler(void);
116 WEAK void I2S0_Rx_IRQHandler(void);
117 WEAK void Reserved46_IRQHandler(void);
118 WEAK void UART0_RX_TX_IRQHandler(void);
119 WEAK void UART0_ERR_IRQHandler(void);
120 WEAK void UART1_RX_TX_IRQHandler(void);
121 WEAK void UART1_ERR_IRQHandler(void);
122 WEAK void UART2_RX_TX_IRQHandler(void);
123 WEAK void UART2_ERR_IRQHandler(void);
124 WEAK void UART3_RX_TX_IRQHandler(void);
125 WEAK void UART3_ERR_IRQHandler(void);
126 WEAK void ADC0_IRQHandler(void);
127 WEAK void CMP0_IRQHandler(void);
128 WEAK void CMP1_IRQHandler(void);
129 WEAK void FTM0_IRQHandler(void);
130 WEAK void FTM1_IRQHandler(void);
131 WEAK void FTM2_IRQHandler(void);
132 WEAK void CMT_IRQHandler(void);
133 WEAK void RTC_IRQHandler(void);
134 WEAK void RTC_Seconds_IRQHandler(void);
135 WEAK void PIT0_IRQHandler(void);
136 WEAK void PIT1_IRQHandler(void);
137 WEAK void PIT2_IRQHandler(void);
138 WEAK void PIT3_IRQHandler(void);
139 WEAK void PDB0_IRQHandler(void);
140 WEAK void USB0_IRQHandler(void);
141 WEAK void USBDCD_IRQHandler(void);
142 WEAK void Reserved71_IRQHandler(void);
143 WEAK void DAC0_IRQHandler(void);
144 WEAK void MCG_IRQHandler(void);
145 WEAK void LPTMR0_IRQHandler(void);
146 WEAK void PORTA_IRQHandler(void);
147 WEAK void PORTB_IRQHandler(void);
148 WEAK void PORTC_IRQHandler(void);
149 WEAK void PORTD_IRQHandler(void);
150 WEAK void PORTE_IRQHandler(void);
151 WEAK void SWI_IRQHandler(void);
152 WEAK void SPI2_IRQHandler(void);
153 WEAK void UART4_RX_TX_IRQHandler(void);
154 WEAK void UART4_ERR_IRQHandler(void);
155 WEAK void Reserved84_IRQHandler(void);
156 WEAK void Reserved85_IRQHandler(void);
157 WEAK void CMP2_IRQHandler(void);
158 WEAK void FTM3_IRQHandler(void);
159 WEAK void DAC1_IRQHandler(void);
160 WEAK void ADC1_IRQHandler(void);
161 WEAK void I2C2_IRQHandler(void);
162 WEAK void CAN0_ORed_Message_buffer_IRQHandler(void);
163 WEAK void CAN0_Bus_Off_IRQHandler(void);
164 WEAK void CAN0_Error_IRQHandler(void);
165 WEAK void CAN0_Tx_Warning_IRQHandler(void);
166 WEAK void CAN0_Rx_Warning_IRQHandler(void);
167 WEAK void CAN0_Wake_Up_IRQHandler(void);
168 WEAK void SDHC_IRQHandler(void);
169 WEAK void ENET_1588_Timer_IRQHandler(void);
170 WEAK void ENET_Transmit_IRQHandler(void);
171 WEAK void ENET_Receive_IRQHandler(void);
172 WEAK void ENET_Error_IRQHandler(void);
173 WEAK void LPUART0_IRQHandler(void);
174 WEAK void TSI0_IRQHandler(void);
175 WEAK void TPM1_IRQHandler(void);
176 WEAK void TPM2_IRQHandler(void);
177 WEAK void USBHSDCD_IRQHandler(void);
178 WEAK void I2C3_IRQHandler(void);
179 WEAK void CMP3_IRQHandler(void);
180 WEAK void USBHS_IRQHandler(void);
181 WEAK void CAN1_ORed_Message_buffer_IRQHandler(void);
182 WEAK void CAN1_Bus_Off_IRQHandler(void);
183 WEAK void CAN1_Error_IRQHandler(void);
184 WEAK void CAN1_Tx_Warning_IRQHandler(void);
185 WEAK void CAN1_Rx_Warning_IRQHandler(void);
186 WEAK void CAN1_Wake_Up_IRQHandler(void);
187
188 //*****************************************************************************
189 // Forward declaration of the driver IRQ handlers. These are aliased
190 // to the IntDefaultHandler, which is a 'forever' loop. When the driver
191 // defines a handler (with the same name), this will automatically take
192 // precedence over these weak definitions
193 //*****************************************************************************
194 void DMA0_DMA16_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
195 void DMA1_DMA17_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
196 void DMA2_DMA18_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
197 void DMA3_DMA19_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
198 void DMA4_DMA20_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
199 void DMA5_DMA21_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
200 void DMA6_DMA22_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
201 void DMA7_DMA23_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
202 void DMA8_DMA24_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
203 void DMA9_DMA25_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
204 void DMA10_DMA26_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
205 void DMA11_DMA27_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
206 void DMA12_DMA28_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
207 void DMA13_DMA29_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
208 void DMA14_DMA30_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
209 void DMA15_DMA31_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
210 void DMA_Error_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
211 void MCM_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
212 void FTFE_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
213 void Read_Collision_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
214 void LVD_LVW_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
215 void LLWU_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
216 void WDOG_EWM_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
217 void RNG_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
218 void I2C0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
219 void I2C1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
220 void SPI0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
221 void SPI1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
222 void I2S0_Tx_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
223 void I2S0_Rx_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
224 void Reserved46_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
225 void UART0_RX_TX_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
226 void UART0_ERR_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
227 void UART1_RX_TX_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
228 void UART1_ERR_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
229 void UART2_RX_TX_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
230 void UART2_ERR_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
231 void UART3_RX_TX_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
232 void UART3_ERR_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
233 void ADC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
234 void CMP0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
235 void CMP1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
236 void FTM0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
237 void FTM1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
238 void FTM2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
239 void CMT_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
240 void RTC_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
241 void RTC_Seconds_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
242 void PIT0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
243 void PIT1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
244 void PIT2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
245 void PIT3_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
246 void PDB0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
247 void USB0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
248 void USBDCD_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
249 void Reserved71_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
250 void DAC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
251 void MCG_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
252 void LPTMR0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
253 void PORTA_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
254 void PORTB_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
255 void PORTC_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
256 void PORTD_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
257 void PORTE_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
258 void SWI_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
259 void SPI2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
260 void UART4_RX_TX_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
261 void UART4_ERR_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
262 void Reserved84_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
263 void Reserved85_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
264 void CMP2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
265 void FTM3_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
266 void DAC1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
267 void ADC1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
268 void I2C2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
269 void CAN0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
270 void SDHC_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
271 void ENET_1588_Timer_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
272 void ENET_Transmit_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
273 void ENET_Receive_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
274 void ENET_Error_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
275 void LPUART0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
276 void TSI0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
277 void TPM1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
278 void TPM2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
279 void USBHSDCD_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
280 void I2C3_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
281 void CMP3_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
282 void USBHS_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
283 void CAN1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
284
285 //*****************************************************************************
286 // The entry point for the application.
287 // __main() is the entry point for Redlib based applications
288 // main() is the entry point for Newlib based applications
289 //*****************************************************************************
290 #if defined (__REDLIB__)
291 extern void __main(void);
292 #endif
293 extern int main(void);
294
295 //*****************************************************************************
296 // External declaration for the pointer to the stack top from the Linker Script
297 //*****************************************************************************
298 extern void _vStackTop(void);
299 //*****************************************************************************
300 #if defined (__cplusplus)
301 } // extern "C"
302 #endif
303 //*****************************************************************************
304 // The vector table.
305 // This relies on the linker script to place at correct location in memory.
306 //*****************************************************************************
307
308
309
310 extern void (* const g_pfnVectors[])(void);
311 extern void * __Vectors __attribute__ ((alias ("g_pfnVectors")));
312
313 __attribute__ ((used, section(".isr_vector")))
314 void (* const g_pfnVectors[])(void) = {
315 // Core Level - CM4
316 &_vStackTop, // The initial stack pointer
317 ResetISR, // The reset handler
318 NMI_Handler, // The NMI handler
319 HardFault_Handler, // The hard fault handler
320 MemManage_Handler, // The MPU fault handler
321 BusFault_Handler, // The bus fault handler
322 UsageFault_Handler, // The usage fault handler
323 0, // Reserved
324 0, // Reserved
325 0, // Reserved
326 0, // Reserved
327 SVC_Handler, // SVCall handler
328 DebugMon_Handler, // Debug monitor handler
329 0, // Reserved
330 PendSV_Handler, // The PendSV handler
331 SysTick_Handler, // The SysTick handler
332
333 // Chip Level - MK66F18
334 DMA0_DMA16_IRQHandler, // 16 : DMA Channel 0, 16 Transfer Complete
335 DMA1_DMA17_IRQHandler, // 17 : DMA Channel 1, 17 Transfer Complete
336 DMA2_DMA18_IRQHandler, // 18 : DMA Channel 2, 18 Transfer Complete
337 DMA3_DMA19_IRQHandler, // 19 : DMA Channel 3, 19 Transfer Complete
338 DMA4_DMA20_IRQHandler, // 20 : DMA Channel 4, 20 Transfer Complete
339 DMA5_DMA21_IRQHandler, // 21 : DMA Channel 5, 21 Transfer Complete
340 DMA6_DMA22_IRQHandler, // 22 : DMA Channel 6, 22 Transfer Complete
341 DMA7_DMA23_IRQHandler, // 23 : DMA Channel 7, 23 Transfer Complete
342 DMA8_DMA24_IRQHandler, // 24 : DMA Channel 8, 24 Transfer Complete
343 DMA9_DMA25_IRQHandler, // 25 : DMA Channel 9, 25 Transfer Complete
344 DMA10_DMA26_IRQHandler, // 26 : DMA Channel 10, 26 Transfer Complete
345 DMA11_DMA27_IRQHandler, // 27 : DMA Channel 11, 27 Transfer Complete
346 DMA12_DMA28_IRQHandler, // 28 : DMA Channel 12, 28 Transfer Complete
347 DMA13_DMA29_IRQHandler, // 29 : DMA Channel 13, 29 Transfer Complete
348 DMA14_DMA30_IRQHandler, // 30 : DMA Channel 14, 30 Transfer Complete
349 DMA15_DMA31_IRQHandler, // 31 : DMA Channel 15, 31 Transfer Complete
350 DMA_Error_IRQHandler, // 32 : DMA Error Interrupt
351 MCM_IRQHandler, // 33 : Normal Interrupt
352 FTFE_IRQHandler, // 34 : FTFE Command complete interrupt
353 Read_Collision_IRQHandler, // 35 : Read Collision Interrupt
354 LVD_LVW_IRQHandler, // 36 : Low Voltage Detect, Low Voltage Warning
355 LLWU_IRQHandler, // 37 : Low Leakage Wakeup Unit
356 WDOG_EWM_IRQHandler, // 38 : WDOG Interrupt
357 RNG_IRQHandler, // 39 : RNG Interrupt
358 I2C0_IRQHandler, // 40 : I2C0 interrupt
359 I2C1_IRQHandler, // 41 : I2C1 interrupt
360 SPI0_IRQHandler, // 42 : SPI0 Interrupt
361 SPI1_IRQHandler, // 43 : SPI1 Interrupt
362 I2S0_Tx_IRQHandler, // 44 : I2S0 transmit interrupt
363 I2S0_Rx_IRQHandler, // 45 : I2S0 receive interrupt
364 Reserved46_IRQHandler, // 46 : Reserved interrupt
365 UART0_RX_TX_IRQHandler, // 47 : UART0 Receive/Transmit interrupt
366 UART0_ERR_IRQHandler, // 48 : UART0 Error interrupt
367 UART1_RX_TX_IRQHandler, // 49 : UART1 Receive/Transmit interrupt
368 UART1_ERR_IRQHandler, // 50 : UART1 Error interrupt
369 UART2_RX_TX_IRQHandler, // 51 : UART2 Receive/Transmit interrupt
370 UART2_ERR_IRQHandler, // 52 : UART2 Error interrupt
371 UART3_RX_TX_IRQHandler, // 53 : UART3 Receive/Transmit interrupt
372 UART3_ERR_IRQHandler, // 54 : UART3 Error interrupt
373 ADC0_IRQHandler, // 55 : ADC0 interrupt
374 CMP0_IRQHandler, // 56 : CMP0 interrupt
375 CMP1_IRQHandler, // 57 : CMP1 interrupt
376 FTM0_IRQHandler, // 58 : FTM0 fault, overflow and channels interrupt
377 FTM1_IRQHandler, // 59 : FTM1 fault, overflow and channels interrupt
378 FTM2_IRQHandler, // 60 : FTM2 fault, overflow and channels interrupt
379 CMT_IRQHandler, // 61 : CMT interrupt
380 RTC_IRQHandler, // 62 : RTC interrupt
381 RTC_Seconds_IRQHandler, // 63 : RTC seconds interrupt
382 PIT0_IRQHandler, // 64 : PIT timer channel 0 interrupt
383 PIT1_IRQHandler, // 65 : PIT timer channel 1 interrupt
384 PIT2_IRQHandler, // 66 : PIT timer channel 2 interrupt
385 PIT3_IRQHandler, // 67 : PIT timer channel 3 interrupt
386 PDB0_IRQHandler, // 68 : PDB0 Interrupt
387 USB0_IRQHandler, // 69 : USB0 interrupt
388 USBDCD_IRQHandler, // 70 : USBDCD Interrupt
389 Reserved71_IRQHandler, // 71 : Reserved interrupt
390 DAC0_IRQHandler, // 72 : DAC0 interrupt
391 MCG_IRQHandler, // 73 : MCG Interrupt
392 LPTMR0_IRQHandler, // 74 : LPTimer interrupt
393 PORTA_IRQHandler, // 75 : Port A interrupt
394 PORTB_IRQHandler, // 76 : Port B interrupt
395 PORTC_IRQHandler, // 77 : Port C interrupt
396 PORTD_IRQHandler, // 78 : Port D interrupt
397 PORTE_IRQHandler, // 79 : Port E interrupt
398 SWI_IRQHandler, // 80 : Software interrupt
399 SPI2_IRQHandler, // 81 : SPI2 Interrupt
400 UART4_RX_TX_IRQHandler, // 82 : UART4 Receive/Transmit interrupt
401 UART4_ERR_IRQHandler, // 83 : UART4 Error interrupt
402 Reserved84_IRQHandler, // 84 : Reserved interrupt
403 Reserved85_IRQHandler, // 85 : Reserved interrupt
404 CMP2_IRQHandler, // 86 : CMP2 interrupt
405 FTM3_IRQHandler, // 87 : FTM3 fault, overflow and channels interrupt
406 DAC1_IRQHandler, // 88 : DAC1 interrupt
407 ADC1_IRQHandler, // 89 : ADC1 interrupt
408 I2C2_IRQHandler, // 90 : I2C2 interrupt
409 CAN0_ORed_Message_buffer_IRQHandler, // 91 : CAN0 OR'd message buffers interrupt
410 CAN0_Bus_Off_IRQHandler, // 92 : CAN0 bus off interrupt
411 CAN0_Error_IRQHandler, // 93 : CAN0 error interrupt
412 CAN0_Tx_Warning_IRQHandler, // 94 : CAN0 Tx warning interrupt
413 CAN0_Rx_Warning_IRQHandler, // 95 : CAN0 Rx warning interrupt
414 CAN0_Wake_Up_IRQHandler, // 96 : CAN0 wake up interrupt
415 SDHC_IRQHandler, // 97 : SDHC interrupt
416 ENET_1588_Timer_IRQHandler, // 98 : Ethernet MAC IEEE 1588 Timer Interrupt
417 ENET_Transmit_IRQHandler, // 99 : Ethernet MAC Transmit Interrupt
418 ENET_Receive_IRQHandler, // 100: Ethernet MAC Receive Interrupt
419 ENET_Error_IRQHandler, // 101: Ethernet MAC Error and miscelaneous Interrupt
420 LPUART0_IRQHandler, // 102: LPUART0 status/error interrupt
421 TSI0_IRQHandler, // 103: TSI0 interrupt
422 TPM1_IRQHandler, // 104: TPM1 fault, overflow and channels interrupt
423 TPM2_IRQHandler, // 105: TPM2 fault, overflow and channels interrupt
424 USBHSDCD_IRQHandler, // 106: USBHSDCD, USBHS Phy Interrupt
425 I2C3_IRQHandler, // 107: I2C3 interrupt
426 CMP3_IRQHandler, // 108: CMP3 interrupt
427 USBHS_IRQHandler, // 109: USB high speed OTG interrupt
428 CAN1_ORed_Message_buffer_IRQHandler, // 110: CAN1 OR'd message buffers interrupt
429 CAN1_Bus_Off_IRQHandler, // 111: CAN1 bus off interrupt
430 CAN1_Error_IRQHandler, // 112: CAN1 error interrupt
431 CAN1_Tx_Warning_IRQHandler, // 113: CAN1 Tx warning interrupt
432 CAN1_Rx_Warning_IRQHandler, // 114: CAN1 Rx warning interrupt
433 CAN1_Wake_Up_IRQHandler, // 115: CAN1 wake up interrupt
434
435
436 }; /* End of g_pfnVectors */
437
438 //*****************************************************************************
439 // Functions to carry out the initialization of RW and BSS data sections. These
440 // are written as separate functions rather than being inlined within the
441 // ResetISR() function in order to cope with MCUs with multiple banks of
442 // memory.
443 //*****************************************************************************
444 __attribute__ ((section(".after_vectors.init_data")))
data_init(unsigned int romstart,unsigned int start,unsigned int len)445 void data_init(unsigned int romstart, unsigned int start, unsigned int len) {
446 unsigned int *pulDest = (unsigned int*) start;
447 unsigned int *pulSrc = (unsigned int*) romstart;
448 unsigned int loop;
449 for (loop = 0; loop < len; loop = loop + 4)
450 *pulDest++ = *pulSrc++;
451 }
452
453 __attribute__ ((section(".after_vectors.init_bss")))
bss_init(unsigned int start,unsigned int len)454 void bss_init(unsigned int start, unsigned int len) {
455 unsigned int *pulDest = (unsigned int*) start;
456 unsigned int loop;
457 for (loop = 0; loop < len; loop = loop + 4)
458 *pulDest++ = 0;
459 }
460
461 //*****************************************************************************
462 // The following symbols are constructs generated by the linker, indicating
463 // the location of various points in the "Global Section Table". This table is
464 // created by the linker via the Code Red managed linker script mechanism. It
465 // contains the load address, execution address and length of each RW data
466 // section and the execution and length of each BSS (zero initialized) section.
467 //*****************************************************************************
468 extern unsigned int __data_section_table;
469 extern unsigned int __data_section_table_end;
470 extern unsigned int __bss_section_table;
471 extern unsigned int __bss_section_table_end;
472
473 //*****************************************************************************
474 // Reset entry point for your code.
475 // Sets up a simple runtime environment and initializes the C/C++
476 // library.
477 //*****************************************************************************
478 __attribute__ ((naked, section(".after_vectors.reset")))
ResetISR(void)479 void ResetISR(void) {
480
481 // Disable interrupts
482 __asm volatile ("cpsid i");
483
484
485 #if defined (__USE_CMSIS)
486 // If __USE_CMSIS defined, then call CMSIS SystemInit code
487 SystemInit();
488
489 #else
490 // Disable Watchdog
491 // Write 0xC520 to watchdog unlock register
492 *((volatile unsigned short *)0x4005200E) = 0xC520;
493 // Followed by 0xD928 to complete the unlock
494 *((volatile unsigned short *)0x4005200E) = 0xD928;
495 // Now disable watchdog via STCTRLH register
496 *((volatile unsigned short *)0x40052000) = 0x01D2u;
497 #endif // (__USE_CMSIS)
498
499 //
500 // Copy the data sections from flash to SRAM.
501 //
502 unsigned int LoadAddr, ExeAddr, SectionLen;
503 unsigned int *SectionTableAddr;
504
505 // Load base address of Global Section Table
506 SectionTableAddr = &__data_section_table;
507
508 // Copy the data sections from flash to SRAM.
509 while (SectionTableAddr < &__data_section_table_end) {
510 LoadAddr = *SectionTableAddr++;
511 ExeAddr = *SectionTableAddr++;
512 SectionLen = *SectionTableAddr++;
513 data_init(LoadAddr, ExeAddr, SectionLen);
514 }
515
516 // At this point, SectionTableAddr = &__bss_section_table;
517 // Zero fill the bss segment
518 while (SectionTableAddr < &__bss_section_table_end) {
519 ExeAddr = *SectionTableAddr++;
520 SectionLen = *SectionTableAddr++;
521 bss_init(ExeAddr, SectionLen);
522 }
523
524 #if !defined (__USE_CMSIS)
525 // Assume that if __USE_CMSIS defined, then CMSIS SystemInit code
526 // will enable the FPU
527 #if defined (__VFP_FP__) && !defined (__SOFTFP__)
528 //
529 // Code to enable the Cortex-M4 FPU only included
530 // if appropriate build options have been selected.
531 // Code taken from Section 7.1, Cortex-M4 TRM (DDI0439C)
532 //
533 // Read CPACR (located at address 0xE000ED88)
534 // Set bits 20-23 to enable CP10 and CP11 coprocessors
535 // Write back the modified value to the CPACR
536 asm volatile ("LDR.W R0, =0xE000ED88\n\t"
537 "LDR R1, [R0]\n\t"
538 "ORR R1, R1, #(0xF << 20)\n\t"
539 "STR R1, [R0]");
540 #endif // (__VFP_FP__) && !(__SOFTFP__)
541 #endif // (__USE_CMSIS)
542
543
544 #if !defined (__USE_CMSIS)
545 // Assume that if __USE_CMSIS defined, then CMSIS SystemInit code
546 // will setup the VTOR register
547
548 // Check to see if we are running the code from a non-zero
549 // address (eg RAM, external flash), in which case we need
550 // to modify the VTOR register to tell the CPU that the
551 // vector table is located at a non-0x0 address.
552 unsigned int * pSCB_VTOR = (unsigned int *) 0xE000ED08;
553 if ((unsigned int *)g_pfnVectors!=(unsigned int *) 0x00000000) {
554 *pSCB_VTOR = (unsigned int)g_pfnVectors;
555 }
556 #endif // (__USE_CMSIS)
557 #if defined (__cplusplus)
558 //
559 // Call C++ library initialisation
560 //
561 __libc_init_array();
562 #endif
563
564 // Reenable interrupts
565 __asm volatile ("cpsie i");
566
567 #if defined (__REDLIB__)
568 // Call the Redlib library, which in turn calls main()
569 __main();
570 #else
571 main();
572 #endif
573
574 //
575 // main() shouldn't return, but if it does, we'll just enter an infinite loop
576 //
577 while (1) {
578 ;
579 }
580 }
581
582 //*****************************************************************************
583 // Default core exception handlers. Override the ones here by defining your own
584 // handler routines in your application code.
585 //*****************************************************************************
NMI_Handler(void)586 WEAK_AV void NMI_Handler(void)
587 { while(1) {}
588 }
589
HardFault_Handler(void)590 WEAK_AV void HardFault_Handler(void)
591 { while(1) {}
592 }
593
MemManage_Handler(void)594 WEAK_AV void MemManage_Handler(void)
595 { while(1) {}
596 }
597
BusFault_Handler(void)598 WEAK_AV void BusFault_Handler(void)
599 { while(1) {}
600 }
601
UsageFault_Handler(void)602 WEAK_AV void UsageFault_Handler(void)
603 { while(1) {}
604 }
605
SVC_Handler(void)606 WEAK_AV void SVC_Handler(void)
607 { while(1) {}
608 }
609
DebugMon_Handler(void)610 WEAK_AV void DebugMon_Handler(void)
611 { while(1) {}
612 }
613
PendSV_Handler(void)614 WEAK_AV void PendSV_Handler(void)
615 { while(1) {}
616 }
617
SysTick_Handler(void)618 WEAK_AV void SysTick_Handler(void)
619 { while(1) {}
620 }
621
622 //*****************************************************************************
623 // Processor ends up here if an unexpected interrupt occurs or a specific
624 // handler is not present in the application code.
625 //*****************************************************************************
IntDefaultHandler(void)626 WEAK_AV void IntDefaultHandler(void)
627 { while(1) {}
628 }
629
630 //*****************************************************************************
631 // Default application exception handlers. Override the ones here by defining
632 // your own handler routines in your application code. These routines call
633 // driver exception handlers or IntDefaultHandler() if no driver exception
634 // handler is included.
635 //*****************************************************************************
DMA0_DMA16_IRQHandler(void)636 WEAK void DMA0_DMA16_IRQHandler(void)
637 { DMA0_DMA16_DriverIRQHandler();
638 }
639
DMA1_DMA17_IRQHandler(void)640 WEAK void DMA1_DMA17_IRQHandler(void)
641 { DMA1_DMA17_DriverIRQHandler();
642 }
643
DMA2_DMA18_IRQHandler(void)644 WEAK void DMA2_DMA18_IRQHandler(void)
645 { DMA2_DMA18_DriverIRQHandler();
646 }
647
DMA3_DMA19_IRQHandler(void)648 WEAK void DMA3_DMA19_IRQHandler(void)
649 { DMA3_DMA19_DriverIRQHandler();
650 }
651
DMA4_DMA20_IRQHandler(void)652 WEAK void DMA4_DMA20_IRQHandler(void)
653 { DMA4_DMA20_DriverIRQHandler();
654 }
655
DMA5_DMA21_IRQHandler(void)656 WEAK void DMA5_DMA21_IRQHandler(void)
657 { DMA5_DMA21_DriverIRQHandler();
658 }
659
DMA6_DMA22_IRQHandler(void)660 WEAK void DMA6_DMA22_IRQHandler(void)
661 { DMA6_DMA22_DriverIRQHandler();
662 }
663
DMA7_DMA23_IRQHandler(void)664 WEAK void DMA7_DMA23_IRQHandler(void)
665 { DMA7_DMA23_DriverIRQHandler();
666 }
667
DMA8_DMA24_IRQHandler(void)668 WEAK void DMA8_DMA24_IRQHandler(void)
669 { DMA8_DMA24_DriverIRQHandler();
670 }
671
DMA9_DMA25_IRQHandler(void)672 WEAK void DMA9_DMA25_IRQHandler(void)
673 { DMA9_DMA25_DriverIRQHandler();
674 }
675
DMA10_DMA26_IRQHandler(void)676 WEAK void DMA10_DMA26_IRQHandler(void)
677 { DMA10_DMA26_DriverIRQHandler();
678 }
679
DMA11_DMA27_IRQHandler(void)680 WEAK void DMA11_DMA27_IRQHandler(void)
681 { DMA11_DMA27_DriverIRQHandler();
682 }
683
DMA12_DMA28_IRQHandler(void)684 WEAK void DMA12_DMA28_IRQHandler(void)
685 { DMA12_DMA28_DriverIRQHandler();
686 }
687
DMA13_DMA29_IRQHandler(void)688 WEAK void DMA13_DMA29_IRQHandler(void)
689 { DMA13_DMA29_DriverIRQHandler();
690 }
691
DMA14_DMA30_IRQHandler(void)692 WEAK void DMA14_DMA30_IRQHandler(void)
693 { DMA14_DMA30_DriverIRQHandler();
694 }
695
DMA15_DMA31_IRQHandler(void)696 WEAK void DMA15_DMA31_IRQHandler(void)
697 { DMA15_DMA31_DriverIRQHandler();
698 }
699
DMA_Error_IRQHandler(void)700 WEAK void DMA_Error_IRQHandler(void)
701 { DMA_Error_DriverIRQHandler();
702 }
703
MCM_IRQHandler(void)704 WEAK void MCM_IRQHandler(void)
705 { MCM_DriverIRQHandler();
706 }
707
FTFE_IRQHandler(void)708 WEAK void FTFE_IRQHandler(void)
709 { FTFE_DriverIRQHandler();
710 }
711
Read_Collision_IRQHandler(void)712 WEAK void Read_Collision_IRQHandler(void)
713 { Read_Collision_DriverIRQHandler();
714 }
715
LVD_LVW_IRQHandler(void)716 WEAK void LVD_LVW_IRQHandler(void)
717 { LVD_LVW_DriverIRQHandler();
718 }
719
LLWU_IRQHandler(void)720 WEAK void LLWU_IRQHandler(void)
721 { LLWU_DriverIRQHandler();
722 }
723
WDOG_EWM_IRQHandler(void)724 WEAK void WDOG_EWM_IRQHandler(void)
725 { WDOG_EWM_DriverIRQHandler();
726 }
727
RNG_IRQHandler(void)728 WEAK void RNG_IRQHandler(void)
729 { RNG_DriverIRQHandler();
730 }
731
I2C0_IRQHandler(void)732 WEAK void I2C0_IRQHandler(void)
733 { I2C0_DriverIRQHandler();
734 }
735
I2C1_IRQHandler(void)736 WEAK void I2C1_IRQHandler(void)
737 { I2C1_DriverIRQHandler();
738 }
739
SPI0_IRQHandler(void)740 WEAK void SPI0_IRQHandler(void)
741 { SPI0_DriverIRQHandler();
742 }
743
SPI1_IRQHandler(void)744 WEAK void SPI1_IRQHandler(void)
745 { SPI1_DriverIRQHandler();
746 }
747
I2S0_Tx_IRQHandler(void)748 WEAK void I2S0_Tx_IRQHandler(void)
749 { I2S0_Tx_DriverIRQHandler();
750 }
751
I2S0_Rx_IRQHandler(void)752 WEAK void I2S0_Rx_IRQHandler(void)
753 { I2S0_Rx_DriverIRQHandler();
754 }
755
Reserved46_IRQHandler(void)756 WEAK void Reserved46_IRQHandler(void)
757 { Reserved46_DriverIRQHandler();
758 }
759
UART0_RX_TX_IRQHandler(void)760 WEAK void UART0_RX_TX_IRQHandler(void)
761 { UART0_RX_TX_DriverIRQHandler();
762 }
763
UART0_ERR_IRQHandler(void)764 WEAK void UART0_ERR_IRQHandler(void)
765 { UART0_ERR_DriverIRQHandler();
766 }
767
UART1_RX_TX_IRQHandler(void)768 WEAK void UART1_RX_TX_IRQHandler(void)
769 { UART1_RX_TX_DriverIRQHandler();
770 }
771
UART1_ERR_IRQHandler(void)772 WEAK void UART1_ERR_IRQHandler(void)
773 { UART1_ERR_DriverIRQHandler();
774 }
775
UART2_RX_TX_IRQHandler(void)776 WEAK void UART2_RX_TX_IRQHandler(void)
777 { UART2_RX_TX_DriverIRQHandler();
778 }
779
UART2_ERR_IRQHandler(void)780 WEAK void UART2_ERR_IRQHandler(void)
781 { UART2_ERR_DriverIRQHandler();
782 }
783
UART3_RX_TX_IRQHandler(void)784 WEAK void UART3_RX_TX_IRQHandler(void)
785 { UART3_RX_TX_DriverIRQHandler();
786 }
787
UART3_ERR_IRQHandler(void)788 WEAK void UART3_ERR_IRQHandler(void)
789 { UART3_ERR_DriverIRQHandler();
790 }
791
ADC0_IRQHandler(void)792 WEAK void ADC0_IRQHandler(void)
793 { ADC0_DriverIRQHandler();
794 }
795
CMP0_IRQHandler(void)796 WEAK void CMP0_IRQHandler(void)
797 { CMP0_DriverIRQHandler();
798 }
799
CMP1_IRQHandler(void)800 WEAK void CMP1_IRQHandler(void)
801 { CMP1_DriverIRQHandler();
802 }
803
FTM0_IRQHandler(void)804 WEAK void FTM0_IRQHandler(void)
805 { FTM0_DriverIRQHandler();
806 }
807
FTM1_IRQHandler(void)808 WEAK void FTM1_IRQHandler(void)
809 { FTM1_DriverIRQHandler();
810 }
811
FTM2_IRQHandler(void)812 WEAK void FTM2_IRQHandler(void)
813 { FTM2_DriverIRQHandler();
814 }
815
CMT_IRQHandler(void)816 WEAK void CMT_IRQHandler(void)
817 { CMT_DriverIRQHandler();
818 }
819
RTC_IRQHandler(void)820 WEAK void RTC_IRQHandler(void)
821 { RTC_DriverIRQHandler();
822 }
823
RTC_Seconds_IRQHandler(void)824 WEAK void RTC_Seconds_IRQHandler(void)
825 { RTC_Seconds_DriverIRQHandler();
826 }
827
PIT0_IRQHandler(void)828 WEAK void PIT0_IRQHandler(void)
829 { PIT0_DriverIRQHandler();
830 }
831
PIT1_IRQHandler(void)832 WEAK void PIT1_IRQHandler(void)
833 { PIT1_DriverIRQHandler();
834 }
835
PIT2_IRQHandler(void)836 WEAK void PIT2_IRQHandler(void)
837 { PIT2_DriverIRQHandler();
838 }
839
PIT3_IRQHandler(void)840 WEAK void PIT3_IRQHandler(void)
841 { PIT3_DriverIRQHandler();
842 }
843
PDB0_IRQHandler(void)844 WEAK void PDB0_IRQHandler(void)
845 { PDB0_DriverIRQHandler();
846 }
847
USB0_IRQHandler(void)848 WEAK void USB0_IRQHandler(void)
849 { USB0_DriverIRQHandler();
850 }
851
USBDCD_IRQHandler(void)852 WEAK void USBDCD_IRQHandler(void)
853 { USBDCD_DriverIRQHandler();
854 }
855
Reserved71_IRQHandler(void)856 WEAK void Reserved71_IRQHandler(void)
857 { Reserved71_DriverIRQHandler();
858 }
859
DAC0_IRQHandler(void)860 WEAK void DAC0_IRQHandler(void)
861 { DAC0_DriverIRQHandler();
862 }
863
MCG_IRQHandler(void)864 WEAK void MCG_IRQHandler(void)
865 { MCG_DriverIRQHandler();
866 }
867
LPTMR0_IRQHandler(void)868 WEAK void LPTMR0_IRQHandler(void)
869 { LPTMR0_DriverIRQHandler();
870 }
871
PORTA_IRQHandler(void)872 WEAK void PORTA_IRQHandler(void)
873 { PORTA_DriverIRQHandler();
874 }
875
PORTB_IRQHandler(void)876 WEAK void PORTB_IRQHandler(void)
877 { PORTB_DriverIRQHandler();
878 }
879
PORTC_IRQHandler(void)880 WEAK void PORTC_IRQHandler(void)
881 { PORTC_DriverIRQHandler();
882 }
883
PORTD_IRQHandler(void)884 WEAK void PORTD_IRQHandler(void)
885 { PORTD_DriverIRQHandler();
886 }
887
PORTE_IRQHandler(void)888 WEAK void PORTE_IRQHandler(void)
889 { PORTE_DriverIRQHandler();
890 }
891
SWI_IRQHandler(void)892 WEAK void SWI_IRQHandler(void)
893 { SWI_DriverIRQHandler();
894 }
895
SPI2_IRQHandler(void)896 WEAK void SPI2_IRQHandler(void)
897 { SPI2_DriverIRQHandler();
898 }
899
UART4_RX_TX_IRQHandler(void)900 WEAK void UART4_RX_TX_IRQHandler(void)
901 { UART4_RX_TX_DriverIRQHandler();
902 }
903
UART4_ERR_IRQHandler(void)904 WEAK void UART4_ERR_IRQHandler(void)
905 { UART4_ERR_DriverIRQHandler();
906 }
907
Reserved84_IRQHandler(void)908 WEAK void Reserved84_IRQHandler(void)
909 { Reserved84_DriverIRQHandler();
910 }
911
Reserved85_IRQHandler(void)912 WEAK void Reserved85_IRQHandler(void)
913 { Reserved85_DriverIRQHandler();
914 }
915
CMP2_IRQHandler(void)916 WEAK void CMP2_IRQHandler(void)
917 { CMP2_DriverIRQHandler();
918 }
919
FTM3_IRQHandler(void)920 WEAK void FTM3_IRQHandler(void)
921 { FTM3_DriverIRQHandler();
922 }
923
DAC1_IRQHandler(void)924 WEAK void DAC1_IRQHandler(void)
925 { DAC1_DriverIRQHandler();
926 }
927
ADC1_IRQHandler(void)928 WEAK void ADC1_IRQHandler(void)
929 { ADC1_DriverIRQHandler();
930 }
931
I2C2_IRQHandler(void)932 WEAK void I2C2_IRQHandler(void)
933 { I2C2_DriverIRQHandler();
934 }
935
CAN0_ORed_Message_buffer_IRQHandler(void)936 WEAK void CAN0_ORed_Message_buffer_IRQHandler(void)
937 { CAN0_DriverIRQHandler();
938 }
939
CAN0_Bus_Off_IRQHandler(void)940 WEAK void CAN0_Bus_Off_IRQHandler(void)
941 { CAN0_DriverIRQHandler();
942 }
943
CAN0_Error_IRQHandler(void)944 WEAK void CAN0_Error_IRQHandler(void)
945 { CAN0_DriverIRQHandler();
946 }
947
CAN0_Tx_Warning_IRQHandler(void)948 WEAK void CAN0_Tx_Warning_IRQHandler(void)
949 { CAN0_DriverIRQHandler();
950 }
951
CAN0_Rx_Warning_IRQHandler(void)952 WEAK void CAN0_Rx_Warning_IRQHandler(void)
953 { CAN0_DriverIRQHandler();
954 }
955
CAN0_Wake_Up_IRQHandler(void)956 WEAK void CAN0_Wake_Up_IRQHandler(void)
957 { CAN0_DriverIRQHandler();
958 }
959
SDHC_IRQHandler(void)960 WEAK void SDHC_IRQHandler(void)
961 { SDHC_DriverIRQHandler();
962 }
963
ENET_1588_Timer_IRQHandler(void)964 WEAK void ENET_1588_Timer_IRQHandler(void)
965 { ENET_1588_Timer_DriverIRQHandler();
966 }
967
ENET_Transmit_IRQHandler(void)968 WEAK void ENET_Transmit_IRQHandler(void)
969 { ENET_Transmit_DriverIRQHandler();
970 }
971
ENET_Receive_IRQHandler(void)972 WEAK void ENET_Receive_IRQHandler(void)
973 { ENET_Receive_DriverIRQHandler();
974 }
975
ENET_Error_IRQHandler(void)976 WEAK void ENET_Error_IRQHandler(void)
977 { ENET_Error_DriverIRQHandler();
978 }
979
LPUART0_IRQHandler(void)980 WEAK void LPUART0_IRQHandler(void)
981 { LPUART0_DriverIRQHandler();
982 }
983
TSI0_IRQHandler(void)984 WEAK void TSI0_IRQHandler(void)
985 { TSI0_DriverIRQHandler();
986 }
987
TPM1_IRQHandler(void)988 WEAK void TPM1_IRQHandler(void)
989 { TPM1_DriverIRQHandler();
990 }
991
TPM2_IRQHandler(void)992 WEAK void TPM2_IRQHandler(void)
993 { TPM2_DriverIRQHandler();
994 }
995
USBHSDCD_IRQHandler(void)996 WEAK void USBHSDCD_IRQHandler(void)
997 { USBHSDCD_DriverIRQHandler();
998 }
999
I2C3_IRQHandler(void)1000 WEAK void I2C3_IRQHandler(void)
1001 { I2C3_DriverIRQHandler();
1002 }
1003
CMP3_IRQHandler(void)1004 WEAK void CMP3_IRQHandler(void)
1005 { CMP3_DriverIRQHandler();
1006 }
1007
USBHS_IRQHandler(void)1008 WEAK void USBHS_IRQHandler(void)
1009 { USBHS_DriverIRQHandler();
1010 }
1011
CAN1_ORed_Message_buffer_IRQHandler(void)1012 WEAK void CAN1_ORed_Message_buffer_IRQHandler(void)
1013 { CAN1_DriverIRQHandler();
1014 }
1015
CAN1_Bus_Off_IRQHandler(void)1016 WEAK void CAN1_Bus_Off_IRQHandler(void)
1017 { CAN1_DriverIRQHandler();
1018 }
1019
CAN1_Error_IRQHandler(void)1020 WEAK void CAN1_Error_IRQHandler(void)
1021 { CAN1_DriverIRQHandler();
1022 }
1023
CAN1_Tx_Warning_IRQHandler(void)1024 WEAK void CAN1_Tx_Warning_IRQHandler(void)
1025 { CAN1_DriverIRQHandler();
1026 }
1027
CAN1_Rx_Warning_IRQHandler(void)1028 WEAK void CAN1_Rx_Warning_IRQHandler(void)
1029 { CAN1_DriverIRQHandler();
1030 }
1031
CAN1_Wake_Up_IRQHandler(void)1032 WEAK void CAN1_Wake_Up_IRQHandler(void)
1033 { CAN1_DriverIRQHandler();
1034 }
1035
1036 //*****************************************************************************
1037
1038 #if defined (DEBUG)
1039 #pragma GCC pop_options
1040 #endif // (DEBUG)
1041
