1 //*****************************************************************************
2 // MIMX8MSCALE_M4 startup code for use with MCUXpresso IDE
3 //
4 // Version : 160922
5 //*****************************************************************************
6 //
7 // Copyright 2016, NXP
8 // All rights reserved.
9 //
10 // Software that is described herein is for illustrative purposes only
11 // which provides customers with programming information regarding the
12 // LPC products. This software is supplied "AS IS" without any warranties of
13 // any kind, and NXP Semiconductors and its licensor disclaim any and
14 // all warranties, express or implied, including all implied warranties of
15 // merchantability, fitness for a particular purpose and non-infringement of
16 // intellectual property rights. NXP Semiconductors assumes no responsibility
17 // or liability for the use of the software, conveys no license or rights under any
18 // patent, copyright, mask work right, or any other intellectual property rights in
19 // or to any products. NXP Semiconductors reserves the right to make changes
20 // in the software without notification. NXP Semiconductors also makes no
21 // representation or warranty that such application will be suitable for the
22 // specified use without further testing or modification.
23 //
24 // Permission to use, copy, modify, and distribute this software and its
25 // documentation is hereby granted, under NXP Semiconductors' and its
26 // licensor's relevant copyrights in the software, without fee, provided that it
27 // is used in conjunction with NXP Semiconductors microcontrollers. This
28 // copyright, permission, and disclaimer notice must appear in all copies of
29 // this code.
30 //*****************************************************************************
31
32 #if defined (DEBUG)
33 #pragma GCC push_options
34 #pragma GCC optimize ("Og")
35 #endif // (DEBUG)
36
37 #if defined (__cplusplus)
38 #ifdef __REDLIB__
39 #error Redlib does not support C++
40 #else
41 //*****************************************************************************
42 //
43 // The entry point for the C++ library startup
44 //
45 //*****************************************************************************
46 extern "C" {
47 extern void __libc_init_array(void);
48 }
49 #endif
50 #endif
51
52 #define WEAK __attribute__ ((weak))
53 #define WEAK_AV __attribute__ ((weak, section(".after_vectors")))
54 #define ALIAS(f) __attribute__ ((weak, alias (#f)))
55
56 //*****************************************************************************
57 #if defined (__cplusplus)
58 extern "C" {
59 #endif
60
61 //*****************************************************************************
62 // Declaration of external SystemInit function
63 //*****************************************************************************
64 #if defined (__USE_CMSIS)
65 extern void SystemInit(void);
66 #endif // (__USE_CMSIS)
67
68 //*****************************************************************************
69 // Forward declaration of the core exception handlers.
70 // When the application defines a handler (with the same name), this will
71 // automatically take precedence over these weak definitions
72 //*****************************************************************************
73 void ResetISR(void);
74 WEAK void NMI_Handler(void);
75 WEAK void HardFault_Handler(void);
76 WEAK void MemManage_Handler(void);
77 WEAK void BusFault_Handler(void);
78 WEAK void UsageFault_Handler(void);
79 WEAK void SVC_Handler(void);
80 WEAK void DebugMon_Handler(void);
81 WEAK void PendSV_Handler(void);
82 WEAK void SysTick_Handler(void);
83 WEAK void IntDefaultHandler(void);
84 //*****************************************************************************
85 // Forward declaration of the application IRQ handlers. When the application
86 // defines a handler (with the same name), this will automatically take
87 // precedence over weak definitions below
88 //*****************************************************************************
89 WEAK void CTI0_IRQHandler(void);
90 WEAK void DMA0_0_4_IRQHandler(void);
91 WEAK void DMA0_1_5_IRQHandler(void);
92 WEAK void DMA0_2_6_IRQHandler(void);
93 WEAK void DMA0_3_7_IRQHandler(void);
94 WEAK void DMA0_8_12_IRQHandler(void);
95 WEAK void DMA0_9_13_IRQHandler(void);
96 WEAK void DMA0_10_14_IRQHandler(void);
97 WEAK void DMA0_11_15_IRQHandler(void);
98 WEAK void DMA0_16_20_IRQHandler(void);
99 WEAK void DMA0_17_21_IRQHandler(void);
100 WEAK void DMA0_18_22_IRQHandler(void);
101 WEAK void DMA0_19_23_IRQHandler(void);
102 WEAK void DMA0_24_28_IRQHandler(void);
103 WEAK void DMA0_25_29_IRQHandler(void);
104 WEAK void DMA0_26_30_IRQHandler(void);
105 WEAK void DMA0_27_31_IRQHandler(void);
106 WEAK void DMA0_Error_IRQHandler(void);
107 WEAK void MCM0_IRQHandler(void);
108 WEAK void EWM_IRQHandler(void);
109 WEAK void LLWU0_IRQHandler(void);
110 WEAK void SIM_IRQHandler(void);
111 WEAK void MU_A_IRQHandler(void);
112 WEAK void Reserved39_IRQHandler(void);
113 WEAK void Software1_IRQHandler(void);
114 WEAK void Software2_IRQHandler(void);
115 WEAK void WDOG0_IRQHandler(void);
116 WEAK void SCG0_IRQHandler(void);
117 WEAK void QSPI_IRQHandler(void);
118 WEAK void LTC_IRQHandler(void);
119 WEAK void Reserved46_IRQHandler(void);
120 WEAK void SNVS_IRQHandler(void);
121 WEAK void TRNG0_IRQHandler(void);
122 WEAK void LPIT0_IRQHandler(void);
123 WEAK void PMC0_IRQHandler(void);
124 WEAK void CMC0_IRQHandler(void);
125 WEAK void LPTMR0_IRQHandler(void);
126 WEAK void LPTMR1_IRQHandler(void);
127 WEAK void TPM0_IRQHandler(void);
128 WEAK void TPM1_IRQHandler(void);
129 WEAK void TPM2_IRQHandler(void);
130 WEAK void TPM3_IRQHandler(void);
131 WEAK void FLEXIO0_IRQHandler(void);
132 WEAK void LPI2C0_IRQHandler(void);
133 WEAK void LPI2C1_IRQHandler(void);
134 WEAK void LPI2C2_IRQHandler(void);
135 WEAK void LPI2C3_IRQHandler(void);
136 WEAK void SAI0_IRQHandler(void);
137 WEAK void SAI1_IRQHandler(void);
138 WEAK void LPSPI0_IRQHandler(void);
139 WEAK void LPSPI1_IRQHandler(void);
140 WEAK void LPUART0_IRQHandler(void);
141 WEAK void LPUART1_IRQHandler(void);
142 WEAK void LPUART2_IRQHandler(void);
143 WEAK void LPUART3_IRQHandler(void);
144 WEAK void DPM_IRQHandler(void);
145 WEAK void PCTLA_IRQHandler(void);
146 WEAK void PCTLB_IRQHandler(void);
147 WEAK void ADC0_IRQHandler(void);
148 WEAK void ADC1_IRQHandler(void);
149 WEAK void CMP0_IRQHandler(void);
150 WEAK void CMP1_IRQHandler(void);
151 WEAK void DAC0_IRQHandler(void);
152 WEAK void DAC1_IRQHandler(void);
153 WEAK void WDOG1_IRQHandler(void);
154 WEAK void USB0_IRQHandler(void);
155 WEAK void USB1_IRQHandler(void);
156 WEAK void Reserved83_IRQHandler(void);
157 WEAK void WDOG2_IRQHandler(void);
158 WEAK void USBPHY_IRQHandler(void);
159 WEAK void CMC1_IRQHandler(void);
160
161 //*****************************************************************************
162 // Forward declaration of the driver IRQ handlers. These are aliased
163 // to the IntDefaultHandler, which is a 'forever' loop. When the driver
164 // defines a handler (with the same name), this will automatically take
165 // precedence over these weak definitions
166 //*****************************************************************************
167 void CTI0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
168 void DMA0_0_4_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
169 void DMA0_1_5_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
170 void DMA0_2_6_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
171 void DMA0_3_7_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
172 void DMA0_8_12_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
173 void DMA0_9_13_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
174 void DMA0_10_14_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
175 void DMA0_11_15_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
176 void DMA0_16_20_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
177 void DMA0_17_21_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
178 void DMA0_18_22_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
179 void DMA0_19_23_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
180 void DMA0_24_28_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
181 void DMA0_25_29_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
182 void DMA0_26_30_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
183 void DMA0_27_31_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
184 void DMA0_Error_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
185 void MCM0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
186 void EWM_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
187 void LLWU0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
188 void SIM_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
189 void MU_A_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
190 void Reserved39_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
191 void Software1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
192 void Software2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
193 void WDOG0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
194 void SCG0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
195 void QSPI_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
196 void LTC_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
197 void Reserved46_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
198 void SNVS_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
199 void TRNG0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
200 void LPIT0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
201 void PMC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
202 void CMC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
203 void LPTMR0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
204 void LPTMR1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
205 void TPM0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
206 void TPM1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
207 void TPM2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
208 void TPM3_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
209 void FLEXIO0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
210 void LPI2C0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
211 void LPI2C1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
212 void LPI2C2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
213 void LPI2C3_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
214 void SAI0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
215 void SAI1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
216 void LPSPI0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
217 void LPSPI1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
218 void LPUART0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
219 void LPUART1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
220 void LPUART2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
221 void LPUART3_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
222 void DPM_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
223 void PCTLA_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
224 void PCTLB_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
225 void ADC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
226 void ADC1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
227 void CMP0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
228 void CMP1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
229 void DAC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
230 void DAC1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
231 void WDOG1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
232 void USB0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
233 void USB1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
234 void Reserved83_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
235 void WDOG2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
236 void USBPHY_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
237 void CMC1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
238
239 //*****************************************************************************
240 // The entry point for the application.
241 // __main() is the entry point for Redlib based applications
242 // main() is the entry point for Newlib based applications
243 //*****************************************************************************
244 #if defined (__REDLIB__)
245 extern void __main(void);
246 #endif
247 extern int main(void);
248
249 //*****************************************************************************
250 // External declaration for the pointer to the stack top from the Linker Script
251 //*****************************************************************************
252 extern void _vStackTop(void);
253
254 //*****************************************************************************
255 #if defined (__cplusplus)
256 } // extern "C"
257 #endif
258
259 //*****************************************************************************
260 // The vector table.
261 // This relies on the linker script to place at correct location in memory.
262 //*****************************************************************************
263 extern void (* const g_pfnVectors[])(void);
264 __attribute__ ((section(".isr_vector")))
265 void (* const g_pfnVectors[])(void) = {
266 &_vStackTop, // The initial stack pointer
267 ResetISR, // The reset handler
268 NMI_Handler, //NMI Handler
269 HardFault_Handler, //Hard Fault Handler
270 MemManage_Handler, //MPU Fault Handler
271 BusFault_Handler, //Bus Fault Handler
272 UsageFault_Handler, //Usage Fault Handler
273 0, //Reserved
274 0, //Reserved
275 0, //Reserved
276 0, //Reserved
277 SVC_Handler, //SVCall Handler
278 DebugMon_Handler, //Debug Monitor Handler
279 0, //Reserved
280 PendSV_Handler, //PendSV Handler
281 SysTick_Handler, //SysTick Handler
282 //External Interrupts
283 CTI0_IRQHandler, //Cross Trigger Interface for CM4
284 DMA0_0_4_IRQHandler, //DMA Channel 0, 4 Transfer Complete
285 DMA0_1_5_IRQHandler, //DMA Channel 1, 5 Transfer Complete
286 DMA0_2_6_IRQHandler, //DMA Channel 2, 6 Transfer Complete
287 DMA0_3_7_IRQHandler, //DMA Channel 3, 7 Transfer Complete
288 DMA0_8_12_IRQHandler, //DMA Channel 8, 12 Transfer Complete
289 DMA0_9_13_IRQHandler, //DMA Channel 9, 13 Transfer Complete
290 DMA0_10_14_IRQHandler, //DMA Channel 10, 14 Transfer Complete
291 DMA0_11_15_IRQHandler, //DMA Channel 11, 15 Transfer Complete
292 DMA0_16_20_IRQHandler, //DMA Channel 16, 20 Transfer Complete
293 DMA0_17_21_IRQHandler, //DMA Channel 17, 21 Transfer Complete
294 DMA0_18_22_IRQHandler, //DMA Channel 18, 22 Transfer Complete
295 DMA0_19_23_IRQHandler, //DMA Channel 19, 23 Transfer Complete
296 DMA0_24_28_IRQHandler, //DMA Channel 24, 28 Transfer Complete
297 DMA0_25_29_IRQHandler, //DMA Channel 25, 29 Transfer Complete
298 DMA0_26_30_IRQHandler, //DMA Channel 26, 30 Transfer Complete
299 DMA0_27_31_IRQHandler, //DMA Channel 27, 31 Transfer Complete
300 DMA0_Error_IRQHandler, //DMA Error Interrupt - All Channels
301 MCM0_IRQHandler, //MCM Interrupt
302 EWM_IRQHandler, //External Watchdog Monitor Interrupt
303 LLWU0_IRQHandler, //Low Leakage Wake Up
304 SIM_IRQHandler, //System Integation Module
305 MU_A_IRQHandler, //Messaging Unit - Side A
306 Reserved39_IRQHandler, //Secured JTAG Controller
307 Software1_IRQHandler, //Software Interrupt
308 Software2_IRQHandler, //Software Interrupt
309 WDOG0_IRQHandler, //Watchdog Interrupt
310 SCG0_IRQHandler, //System Clock Generator for M4 domain
311 QSPI_IRQHandler, //Quad Serial Peripheral Interface
312 LTC_IRQHandler, //Low Power Trusted Cryptography
313 Reserved46_IRQHandler, //Reserved
314 SNVS_IRQHandler, //Secure Non-Volatile Storage Consolidated Interrupt
315 TRNG0_IRQHandler, //Random Number Generator
316 LPIT0_IRQHandler, //Low Power Periodic Interrupt Timer
317 PMC0_IRQHandler, //Power Management Control interrupts for M4 domain
318 CMC0_IRQHandler, //Core Mode Controller interrupts for M4 domain
319 LPTMR0_IRQHandler, //Low Power Timer
320 LPTMR1_IRQHandler, //Low Power Timer
321 TPM0_IRQHandler, //Timer PWM module
322 TPM1_IRQHandler, //Timer PWM module
323 TPM2_IRQHandler, //Timer PWM module
324 TPM3_IRQHandler, //Timer PWM module
325 FLEXIO0_IRQHandler, //Flexible IO
326 LPI2C0_IRQHandler, //Inter-integrated circuit 0
327 LPI2C1_IRQHandler, //Inter-integrated circuit 1
328 LPI2C2_IRQHandler, //Inter-integrated circuit 2
329 LPI2C3_IRQHandler, //Inter-integrated circuit 3
330 SAI0_IRQHandler, //Serial Audio Interface
331 SAI1_IRQHandler, //Serial Audio Interface 1
332 LPSPI0_IRQHandler, //Low Power Serial Peripheral Interface
333 LPSPI1_IRQHandler, //Low Power Serial Peripheral Interface
334 LPUART0_IRQHandler, //Low Power UART
335 LPUART1_IRQHandler, //Low Power UART
336 LPUART2_IRQHandler, //Low Power UART
337 LPUART3_IRQHandler, //Low Power UART
338 DPM_IRQHandler, //Dynamic Process Monitor
339 PCTLA_IRQHandler, //Port A pin interrupt
340 PCTLB_IRQHandler, //Port B pin interrupt
341 ADC0_IRQHandler, //Analog to Digital Convertor
342 ADC1_IRQHandler, //Analog to Digital Convertor
343 CMP0_IRQHandler, //Comparator
344 CMP1_IRQHandler, //Comparator
345 DAC0_IRQHandler, //Digital to Analog Convertor
346 DAC1_IRQHandler, //Digital to Analog Convertor
347 WDOG1_IRQHandler, //Watchdog Interrupt from A7 subsystem
348 USB0_IRQHandler, //USB 0 Interrupt from A7 subsystem
349 USB1_IRQHandler, //USB 1 Interrupt from A7 subsystem
350 Reserved83_IRQHandler, //
351 WDOG2_IRQHandler, //Watchdog Interrupt from A7 subsystem
352 USBPHY_IRQHandler, //USB PHY (used in conjunction with USBOTG0)
353 CMC1_IRQHandler, //A7 resets
354 }; /* End of g_pfnVectors */
355
356 //*****************************************************************************
357 // Functions to carry out the initialization of RW and BSS data sections. These
358 // are written as separate functions rather than being inlined within the
359 // ResetISR() function in order to cope with MCUs with multiple banks of
360 // memory.
361 //*****************************************************************************
362 __attribute__ ((section(".after_vectors.init_data")))
data_init(unsigned int romstart,unsigned int start,unsigned int len)363 void data_init(unsigned int romstart, unsigned int start, unsigned int len) {
364 unsigned int *pulDest = (unsigned int*) start;
365 unsigned int *pulSrc = (unsigned int*) romstart;
366 unsigned int loop;
367 for (loop = 0; loop < len; loop = loop + 4)
368 *pulDest++ = *pulSrc++;
369 }
370
371 __attribute__ ((section(".after_vectors.init_bss")))
bss_init(unsigned int start,unsigned int len)372 void bss_init(unsigned int start, unsigned int len) {
373 unsigned int *pulDest = (unsigned int*) start;
374 unsigned int loop;
375 for (loop = 0; loop < len; loop = loop + 4)
376 *pulDest++ = 0;
377 }
378
379 //*****************************************************************************
380 // The following symbols are constructs generated by the linker, indicating
381 // the location of various points in the "Global Section Table". This table is
382 // created by the linker via the Code Red managed linker script mechanism. It
383 // contains the load address, execution address and length of each RW data
384 // section and the execution and length of each BSS (zero initialized) section.
385 //*****************************************************************************
386 extern unsigned int __data_section_table;
387 extern unsigned int __data_section_table_end;
388 extern unsigned int __bss_section_table;
389 extern unsigned int __bss_section_table_end;
390
391 //*****************************************************************************
392 // Reset entry point for your code.
393 // Sets up a simple runtime environment and initializes the C/C++
394 // library.
395 //*****************************************************************************
396 __attribute__ ((naked, section(".after_vectors.reset")))
ResetISR(void)397 void ResetISR(void) {
398 // Disable interrupts
399 __asm volatile ("cpsid i");
400
401 #if defined (__USE_CMSIS)
402 // If __USE_CMSIS defined, then call CMSIS SystemInit code
403 SystemInit();
404 #endif // (__USE_CMSIS)
405
406 //
407 // Copy the data sections from flash to SRAM.
408 //
409 unsigned int LoadAddr, ExeAddr, SectionLen;
410 unsigned int *SectionTableAddr;
411
412 // Load base address of Global Section Table
413 SectionTableAddr = &__data_section_table;
414
415 // Copy the data sections from flash to SRAM.
416 while (SectionTableAddr < &__data_section_table_end) {
417 LoadAddr = *SectionTableAddr++;
418 ExeAddr = *SectionTableAddr++;
419 SectionLen = *SectionTableAddr++;
420 data_init(LoadAddr, ExeAddr, SectionLen);
421 }
422
423 // At this point, SectionTableAddr = &__bss_section_table;
424 // Zero fill the bss segment
425 while (SectionTableAddr < &__bss_section_table_end) {
426 ExeAddr = *SectionTableAddr++;
427 SectionLen = *SectionTableAddr++;
428 bss_init(ExeAddr, SectionLen);
429 }
430
431 #if !defined (__USE_CMSIS)
432 // Assume that if __USE_CMSIS defined, then CMSIS SystemInit code
433 // will enable the FPU
434 #if defined (__VFP_FP__) && !defined (__SOFTFP__)
435 //
436 // Code to enable the Cortex-M4 FPU only included
437 // if appropriate build options have been selected.
438 // Code taken from Section 7.1, Cortex-M4 TRM (DDI0439C)
439 //
440 // Read CPACR (located at address 0xE000ED88)
441 // Set bits 20-23 to enable CP10 and CP11 coprocessors
442 // Write back the modified value to the CPACR
443 asm volatile ("LDR.W R0, =0xE000ED88\n\t"
444 "LDR R1, [R0]\n\t"
445 "ORR R1, R1, #(0xF << 20)\n\t"
446 "STR R1, [R0]");
447 #endif // (__VFP_FP__) && !(__SOFTFP__)
448 #endif // (__USE_CMSIS)
449
450 #if !defined (__USE_CMSIS)
451 // Assume that if __USE_CMSIS defined, then CMSIS SystemInit code
452 // will setup the VTOR register
453
454 // Check to see if we are running the code from a non-zero
455 // address (eg RAM, external flash), in which case we need
456 // to modify the VTOR register to tell the CPU that the
457 // vector table is located at a non-0x0 address.
458 unsigned int * pSCB_VTOR = (unsigned int *) 0xE000ED08;
459 if ((unsigned int *)g_pfnVectors!=(unsigned int *) 0x00000000) {
460 *pSCB_VTOR = (unsigned int)g_pfnVectors;
461 }
462 #endif // (__USE_CMSIS)
463
464 #if defined (__cplusplus)
465 //
466 // Call C++ library initialisation
467 //
468 __libc_init_array();
469 #endif
470
471
472 // Reenable interrupts
473 __asm volatile ("cpsie i");
474
475 #if defined (__REDLIB__)
476 // Call the Redlib library, which in turn calls main()
477 __main() ;
478 #else
479 main();
480 #endif
481
482 //
483 // main() shouldn't return, but if it does, we'll just enter an infinite loop
484 //
485 while (1) {
486 ;
487 }
488 }
489
490 //*****************************************************************************
491 // Default core exception handlers. Override the ones here by defining your own
492 // handler routines in your application code.
493 //*****************************************************************************
NMI_Handler(void)494 WEAK void NMI_Handler(void) //NMI Handler
495 { while(1) {}
496 }
497
HardFault_Handler(void)498 WEAK void HardFault_Handler(void) //Hard Fault Handler
499 { while(1) {}
500 }
501
MemManage_Handler(void)502 WEAK void MemManage_Handler(void) //MPU Fault Handler
503 { while(1) {}
504 }
505
BusFault_Handler(void)506 WEAK void BusFault_Handler(void) //Bus Fault Handler
507 { while(1) {}
508 }
509
UsageFault_Handler(void)510 WEAK void UsageFault_Handler(void) //Usage Fault Handler
511 { while(1) {}
512 }
513
SVC_Handler(void)514 WEAK void SVC_Handler(void) //SVCall Handler
515 { while(1) {}
516 }
517
DebugMon_Handler(void)518 WEAK void DebugMon_Handler(void) //Debug Monitor Handler
519 { while(1) {}
520 }
521
PendSV_Handler(void)522 WEAK void PendSV_Handler(void) //PendSV Handler
523 { while(1) {}
524 }
525
SysTick_Handler(void)526 WEAK void SysTick_Handler(void) //SysTick Handler
527 { while(1) {}
528 }
529
530 //*****************************************************************************
531 // Processor ends up here if an unexpected interrupt occurs or a specific
532 // handler is not present in the application code.
533 //*****************************************************************************
IntDefaultHandler(void)534 WEAK_AV void IntDefaultHandler(void)
535 { while(1) {}
536 }
537
538 //*****************************************************************************
539 // Default application exception handlers. Override the ones here by defining
540 // your own handler routines in your application code. These routines call
541 // driver exception handlers or IntDefaultHandler() if no driver exception
542 // handler is included.
543 //*****************************************************************************
CTI0_IRQHandler(void)544 WEAK void CTI0_IRQHandler(void) //Cross Trigger Interface for CM4
545 { CTI0_DriverIRQHandler();
546 }
547
DMA0_0_4_IRQHandler(void)548 WEAK void DMA0_0_4_IRQHandler(void) //DMA Channel 0, 4 Transfer Complete
549 { DMA0_0_4_DriverIRQHandler();
550 }
551
DMA0_1_5_IRQHandler(void)552 WEAK void DMA0_1_5_IRQHandler(void) //DMA Channel 1, 5 Transfer Complete
553 { DMA0_1_5_DriverIRQHandler();
554 }
555
DMA0_2_6_IRQHandler(void)556 WEAK void DMA0_2_6_IRQHandler(void) //DMA Channel 2, 6 Transfer Complete
557 { DMA0_2_6_DriverIRQHandler();
558 }
559
DMA0_3_7_IRQHandler(void)560 WEAK void DMA0_3_7_IRQHandler(void) //DMA Channel 3, 7 Transfer Complete
561 { DMA0_3_7_DriverIRQHandler();
562 }
563
DMA0_8_12_IRQHandler(void)564 WEAK void DMA0_8_12_IRQHandler(void) //DMA Channel 8, 12 Transfer Complete
565 { DMA0_8_12_DriverIRQHandler();
566 }
567
DMA0_9_13_IRQHandler(void)568 WEAK void DMA0_9_13_IRQHandler(void) //DMA Channel 9, 13 Transfer Complete
569 { DMA0_9_13_DriverIRQHandler();
570 }
571
DMA0_10_14_IRQHandler(void)572 WEAK void DMA0_10_14_IRQHandler(void) //DMA Channel 10, 14 Transfer Complete
573 { DMA0_10_14_DriverIRQHandler();
574 }
575
DMA0_11_15_IRQHandler(void)576 WEAK void DMA0_11_15_IRQHandler(void) //DMA Channel 11, 15 Transfer Complete
577 { DMA0_11_15_DriverIRQHandler();
578 }
579
DMA0_16_20_IRQHandler(void)580 WEAK void DMA0_16_20_IRQHandler(void) //DMA Channel 16, 20 Transfer Complete
581 { DMA0_16_20_DriverIRQHandler();
582 }
583
DMA0_17_21_IRQHandler(void)584 WEAK void DMA0_17_21_IRQHandler(void) //DMA Channel 17, 21 Transfer Complete
585 { DMA0_17_21_DriverIRQHandler();
586 }
587
DMA0_18_22_IRQHandler(void)588 WEAK void DMA0_18_22_IRQHandler(void) //DMA Channel 18, 22 Transfer Complete
589 { DMA0_18_22_DriverIRQHandler();
590 }
591
DMA0_19_23_IRQHandler(void)592 WEAK void DMA0_19_23_IRQHandler(void) //DMA Channel 19, 23 Transfer Complete
593 { DMA0_19_23_DriverIRQHandler();
594 }
595
DMA0_24_28_IRQHandler(void)596 WEAK void DMA0_24_28_IRQHandler(void) //DMA Channel 24, 28 Transfer Complete
597 { DMA0_24_28_DriverIRQHandler();
598 }
599
DMA0_25_29_IRQHandler(void)600 WEAK void DMA0_25_29_IRQHandler(void) //DMA Channel 25, 29 Transfer Complete
601 { DMA0_25_29_DriverIRQHandler();
602 }
603
DMA0_26_30_IRQHandler(void)604 WEAK void DMA0_26_30_IRQHandler(void) //DMA Channel 26, 30 Transfer Complete
605 { DMA0_26_30_DriverIRQHandler();
606 }
607
DMA0_27_31_IRQHandler(void)608 WEAK void DMA0_27_31_IRQHandler(void) //DMA Channel 27, 31 Transfer Complete
609 { DMA0_27_31_DriverIRQHandler();
610 }
611
DMA0_Error_IRQHandler(void)612 WEAK void DMA0_Error_IRQHandler(void) //DMA Error Interrupt - All Channels
613 { DMA0_Error_DriverIRQHandler();
614 }
615
MCM0_IRQHandler(void)616 WEAK void MCM0_IRQHandler(void) //MCM Interrupt
617 { MCM0_DriverIRQHandler();
618 }
619
EWM_IRQHandler(void)620 WEAK void EWM_IRQHandler(void) //External Watchdog Monitor Interrupt
621 { EWM_DriverIRQHandler();
622 }
623
LLWU0_IRQHandler(void)624 WEAK void LLWU0_IRQHandler(void) //Low Leakage Wake Up
625 { LLWU0_DriverIRQHandler();
626 }
627
SIM_IRQHandler(void)628 WEAK void SIM_IRQHandler(void) //System Integation Module
629 { SIM_DriverIRQHandler();
630 }
631
MU_A_IRQHandler(void)632 WEAK void MU_A_IRQHandler(void) //Messaging Unit - Side A
633 { MU_A_DriverIRQHandler();
634 }
635
Software1_IRQHandler(void)636 WEAK void Software1_IRQHandler(void) //Software Interrupt
637 { Software1_DriverIRQHandler();
638 }
639
Software2_IRQHandler(void)640 WEAK void Software2_IRQHandler(void) //Software Interrupt
641 { Software2_DriverIRQHandler();
642 }
643
WDOG0_IRQHandler(void)644 WEAK void WDOG0_IRQHandler(void) //Watchdog Interrupt
645 { WDOG0_DriverIRQHandler();
646 }
647
SCG0_IRQHandler(void)648 WEAK void SCG0_IRQHandler(void) //System Clock Generator for M4 domain
649 { SCG0_DriverIRQHandler();
650 }
651
QSPI_IRQHandler(void)652 WEAK void QSPI_IRQHandler(void) //Quad Serial Peripheral Interface
653 { QSPI_DriverIRQHandler();
654 }
655
LTC_IRQHandler(void)656 WEAK void LTC_IRQHandler(void) //Low Power Trusted Cryptography
657 { LTC_DriverIRQHandler();
658 }
659
SNVS_IRQHandler(void)660 WEAK void SNVS_IRQHandler(void) //Secure Non-Volatile Storage Consolidated Interrupt
661 { SNVS_DriverIRQHandler();
662 }
663
TRNG0_IRQHandler(void)664 WEAK void TRNG0_IRQHandler(void) //Random Number Generator
665 { TRNG0_DriverIRQHandler();
666 }
667
LPIT0_IRQHandler(void)668 WEAK void LPIT0_IRQHandler(void) //Low Power Periodic Interrupt Timer
669 { LPIT0_DriverIRQHandler();
670 }
671
PMC0_IRQHandler(void)672 WEAK void PMC0_IRQHandler(void) //Power Management Control interrupts for M4 domain
673 { PMC0_DriverIRQHandler();
674 }
675
CMC0_IRQHandler(void)676 WEAK void CMC0_IRQHandler(void) //Core Mode Controller interrupts for M4 domain
677 { CMC0_DriverIRQHandler();
678 }
679
LPTMR0_IRQHandler(void)680 WEAK void LPTMR0_IRQHandler(void) //Low Power Timer
681 { LPTMR0_DriverIRQHandler();
682 }
683
LPTMR1_IRQHandler(void)684 WEAK void LPTMR1_IRQHandler(void) //Low Power Timer
685 { LPTMR1_DriverIRQHandler();
686 }
687
TPM0_IRQHandler(void)688 WEAK void TPM0_IRQHandler(void) //Timer PWM module
689 { TPM0_DriverIRQHandler();
690 }
691
TPM1_IRQHandler(void)692 WEAK void TPM1_IRQHandler(void) //Timer PWM module
693 { TPM1_DriverIRQHandler();
694 }
695
TPM2_IRQHandler(void)696 WEAK void TPM2_IRQHandler(void) //Timer PWM module
697 { TPM2_DriverIRQHandler();
698 }
699
TPM3_IRQHandler(void)700 WEAK void TPM3_IRQHandler(void) //Timer PWM module
701 { TPM3_DriverIRQHandler();
702 }
703
FLEXIO0_IRQHandler(void)704 WEAK void FLEXIO0_IRQHandler(void) //Flexible IO
705 { FLEXIO0_DriverIRQHandler();
706 }
707
LPI2C0_IRQHandler(void)708 WEAK void LPI2C0_IRQHandler(void) //Inter-integrated circuit 0
709 { LPI2C0_DriverIRQHandler();
710 }
711
LPI2C1_IRQHandler(void)712 WEAK void LPI2C1_IRQHandler(void) //Inter-integrated circuit 1
713 { LPI2C1_DriverIRQHandler();
714 }
715
LPI2C2_IRQHandler(void)716 WEAK void LPI2C2_IRQHandler(void) //Inter-integrated circuit 2
717 { LPI2C2_DriverIRQHandler();
718 }
719
LPI2C3_IRQHandler(void)720 WEAK void LPI2C3_IRQHandler(void) //Inter-integrated circuit 3
721 { LPI2C3_DriverIRQHandler();
722 }
723
SAI0_IRQHandler(void)724 WEAK void SAI0_IRQHandler(void) //Serial Audio Interface
725 { SAI0_DriverIRQHandler();
726 }
727
SAI1_IRQHandler(void)728 WEAK void SAI1_IRQHandler(void) //Serial Audio Interface 1
729 { SAI1_DriverIRQHandler();
730 }
731
LPSPI0_IRQHandler(void)732 WEAK void LPSPI0_IRQHandler(void) //Low Power Serial Peripheral Interface
733 { LPSPI0_DriverIRQHandler();
734 }
735
LPSPI1_IRQHandler(void)736 WEAK void LPSPI1_IRQHandler(void) //Low Power Serial Peripheral Interface
737 { LPSPI1_DriverIRQHandler();
738 }
739
LPUART0_IRQHandler(void)740 WEAK void LPUART0_IRQHandler(void) //Low Power UART
741 { LPUART0_DriverIRQHandler();
742 }
743
LPUART1_IRQHandler(void)744 WEAK void LPUART1_IRQHandler(void) //Low Power UART
745 { LPUART1_DriverIRQHandler();
746 }
747
LPUART2_IRQHandler(void)748 WEAK void LPUART2_IRQHandler(void) //Low Power UART
749 { LPUART2_DriverIRQHandler();
750 }
751
LPUART3_IRQHandler(void)752 WEAK void LPUART3_IRQHandler(void) //Low Power UART
753 { LPUART3_DriverIRQHandler();
754 }
755
DPM_IRQHandler(void)756 WEAK void DPM_IRQHandler(void) //Dynamic Process Monitor
757 { DPM_DriverIRQHandler();
758 }
759
PCTLA_IRQHandler(void)760 WEAK void PCTLA_IRQHandler(void) //Port A pin interrupt
761 { PCTLA_DriverIRQHandler();
762 }
763
PCTLB_IRQHandler(void)764 WEAK void PCTLB_IRQHandler(void) //Port B pin interrupt
765 { PCTLB_DriverIRQHandler();
766 }
767
ADC0_IRQHandler(void)768 WEAK void ADC0_IRQHandler(void) //Analog to Digital Convertor
769 { ADC0_DriverIRQHandler();
770 }
771
ADC1_IRQHandler(void)772 WEAK void ADC1_IRQHandler(void) //Analog to Digital Convertor
773 { ADC1_DriverIRQHandler();
774 }
775
CMP0_IRQHandler(void)776 WEAK void CMP0_IRQHandler(void) //Comparator
777 { CMP0_DriverIRQHandler();
778 }
779
CMP1_IRQHandler(void)780 WEAK void CMP1_IRQHandler(void) //Comparator
781 { CMP1_DriverIRQHandler();
782 }
783
DAC0_IRQHandler(void)784 WEAK void DAC0_IRQHandler(void) //Digital to Analog Convertor
785 { DAC0_DriverIRQHandler();
786 }
787
DAC1_IRQHandler(void)788 WEAK void DAC1_IRQHandler(void) //Digital to Analog Convertor
789 { DAC1_DriverIRQHandler();
790 }
791
WDOG1_IRQHandler(void)792 WEAK void WDOG1_IRQHandler(void) //Watchdog Interrupt from A7 subsystem
793 { WDOG1_DriverIRQHandler();
794 }
795
USB0_IRQHandler(void)796 WEAK void USB0_IRQHandler(void) //USB 0 Interrupt from A7 subsystem
797 { USB0_DriverIRQHandler();
798 }
799
USB1_IRQHandler(void)800 WEAK void USB1_IRQHandler(void) //USB 1 Interrupt from A7 subsystem
801 { USB1_DriverIRQHandler();
802 }
803
WDOG2_IRQHandler(void)804 WEAK void WDOG2_IRQHandler(void) //Watchdog Interrupt from A7 subsystem
805 { WDOG2_DriverIRQHandler();
806 }
807
USBPHY_IRQHandler(void)808 WEAK void USBPHY_IRQHandler(void) //USB PHY (used in conjunction with USBOTG0)
809 { USBPHY_DriverIRQHandler();
810 }
811
CMC1_IRQHandler(void)812 WEAK void CMC1_IRQHandler(void) //A7 resets
813 { CMC1_DriverIRQHandler();
814 }
815
816 //*****************************************************************************
817
818 #if defined (DEBUG)
819 #pragma GCC pop_options
820 #endif // (DEBUG)
821
822
