1 //*****************************************************************************
2 // K32L2A31A startup code for use with MCUXpresso IDE
3 //
4 // Version : 220823
5 //*****************************************************************************
6 //
7 // Copyright 2016-2023 NXP
8 // All rights reserved.
9 //
10 // SPDX-License-Identifier: BSD-3-Clause
11 //*****************************************************************************
12 
13 #if defined (DEBUG)
14 #pragma GCC push_options
15 #pragma GCC optimize ("Og")
16 #endif // (DEBUG)
17 
18 #if defined (__cplusplus)
19 #ifdef __REDLIB__
20 #error Redlib does not support C++
21 #else
22 //*****************************************************************************
23 //
24 // The entry point for the C++ library startup
25 //
26 //*****************************************************************************
27 extern "C" {
28     extern void __libc_init_array(void);
29 }
30 #endif
31 #endif
32 
33 #define WEAK __attribute__ ((weak))
34 #define WEAK_AV __attribute__ ((weak, section(".after_vectors")))
35 #define ALIAS(f) __attribute__ ((weak, alias (#f)))
36 
37 //*****************************************************************************
38 #if defined (__cplusplus)
39 extern "C" {
40 #endif
41 
42 //*****************************************************************************
43 // Flash Configuration block : 16-byte flash configuration field that stores
44 // default protection settings (loaded on reset) and security information that
45 // allows the MCU to restrict access to the Flash Memory module.
46 // Placed at address 0x400 by the linker script.
47 //*****************************************************************************
48 __attribute__ ((used,section(".FlashConfig"))) const struct {
49     unsigned int word1;
50     unsigned int word2;
51     unsigned int word3;
52     unsigned int word4;
53 } Flash_Config = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFF3DFE};
54 //*****************************************************************************
55 // Declaration of external SystemInit function
56 //*****************************************************************************
57 #if defined (__USE_CMSIS)
58 extern void SystemInit(void);
59 #endif // (__USE_CMSIS)
60 
61 //*****************************************************************************
62 // Forward declaration of the core exception handlers.
63 // When the application defines a handler (with the same name), this will
64 // automatically take precedence over these weak definitions.
65 // If your application is a C++ one, then any interrupt handlers defined
66 // in C++ files within in your main application will need to have C linkage
67 // rather than C++ linkage. To do this, make sure that you are using extern "C"
68 // { .... } around the interrupt handler within your main application code.
69 //*****************************************************************************
70      void ResetISR(void);
71 WEAK void NMI_Handler(void);
72 WEAK void HardFault_Handler(void);
73 WEAK void SVC_Handler(void);
74 WEAK void PendSV_Handler(void);
75 WEAK void SysTick_Handler(void);
76 WEAK void IntDefaultHandler(void);
77 
78 //*****************************************************************************
79 // Forward declaration of the application IRQ handlers. When the application
80 // defines a handler (with the same name), this will automatically take
81 // precedence over weak definitions below
82 //*****************************************************************************
83 WEAK void DMA0_04_IRQHandler(void);
84 WEAK void DMA0_15_IRQHandler(void);
85 WEAK void DMA0_26_IRQHandler(void);
86 WEAK void DMA0_37_IRQHandler(void);
87 WEAK void CTI0_DMA0_Error_IRQHandler(void);
88 WEAK void FLEXIO0_IRQHandler(void);
89 WEAK void TPM0_IRQHandler(void);
90 WEAK void TPM1_IRQHandler(void);
91 WEAK void TPM2_IRQHandler(void);
92 WEAK void LPIT0_IRQHandler(void);
93 WEAK void LPSPI0_IRQHandler(void);
94 WEAK void LPSPI1_IRQHandler(void);
95 WEAK void LPUART0_IRQHandler(void);
96 WEAK void LPUART1_IRQHandler(void);
97 WEAK void LPI2C0_IRQHandler(void);
98 WEAK void LPI2C1_IRQHandler(void);
99 WEAK void Reserved32_IRQHandler(void);
100 WEAK void PORTA_IRQHandler(void);
101 WEAK void PORTB_IRQHandler(void);
102 WEAK void PORTC_IRQHandler(void);
103 WEAK void PORTD_IRQHandler(void);
104 WEAK void PORTE_IRQHandler(void);
105 WEAK void LLWU_IRQHandler(void);
106 WEAK void Reserved39_IRQHandler(void);
107 WEAK void USB0_IRQHandler(void);
108 WEAK void ADC0_IRQHandler(void);
109 WEAK void LPTMR0_IRQHandler(void);
110 WEAK void RTC_Seconds_IRQHandler(void);
111 WEAK void INTMUX0_0_IRQHandler(void);
112 WEAK void INTMUX0_1_IRQHandler(void);
113 WEAK void INTMUX0_2_IRQHandler(void);
114 WEAK void INTMUX0_3_IRQHandler(void);
115 WEAK void LPTMR1_IRQHandler(void);
116 WEAK void Reserved49_IRQHandler(void);
117 WEAK void Reserved50_IRQHandler(void);
118 WEAK void Reserved51_IRQHandler(void);
119 WEAK void LPSPI2_IRQHandler(void);
120 WEAK void LPUART2_IRQHandler(void);
121 WEAK void EMVSIM0_IRQHandler(void);
122 WEAK void LPI2C2_IRQHandler(void);
123 WEAK void TSI0_IRQHandler(void);
124 WEAK void PMC_IRQHandler(void);
125 WEAK void FTFA_IRQHandler(void);
126 WEAK void SCG_IRQHandler(void);
127 WEAK void WDOG0_IRQHandler(void);
128 WEAK void DAC0_IRQHandler(void);
129 WEAK void TRNG_IRQHandler(void);
130 WEAK void RCM_IRQHandler(void);
131 WEAK void CMP0_IRQHandler(void);
132 WEAK void CMP1_IRQHandler(void);
133 WEAK void RTC_IRQHandler(void);
134 
135 //*****************************************************************************
136 // Forward declaration of the driver IRQ handlers. These are aliased
137 // to the IntDefaultHandler, which is a 'forever' loop. When the driver
138 // defines a handler (with the same name), this will automatically take
139 // precedence over these weak definitions
140 //*****************************************************************************
141 void DMA0_04_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
142 void DMA0_15_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
143 void DMA0_26_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
144 void DMA0_37_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
145 void CTI0_DMA0_Error_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
146 void FLEXIO0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
147 void TPM0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
148 void TPM1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
149 void TPM2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
150 void LPIT0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
151 void LPSPI0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
152 void LPSPI1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
153 void LPUART0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
154 void LPUART1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
155 void LPI2C0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
156 void LPI2C1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
157 void Reserved32_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
158 void PORTA_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
159 void PORTB_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
160 void PORTC_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
161 void PORTD_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
162 void PORTE_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
163 void LLWU_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
164 void Reserved39_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
165 void USB0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
166 void ADC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
167 void LPTMR0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
168 void RTC_Seconds_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
169 void INTMUX0_0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
170 void INTMUX0_1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
171 void INTMUX0_2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
172 void INTMUX0_3_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
173 void LPTMR1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
174 void Reserved49_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
175 void Reserved50_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
176 void Reserved51_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
177 void LPSPI2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
178 void LPUART2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
179 void EMVSIM0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
180 void LPI2C2_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
181 void TSI0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
182 void PMC_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
183 void FTFA_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
184 void SCG_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
185 void WDOG0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
186 void DAC0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
187 void TRNG_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
188 void RCM_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
189 void CMP0_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
190 void CMP1_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
191 void RTC_DriverIRQHandler(void) ALIAS(IntDefaultHandler);
192 
193 //*****************************************************************************
194 // The entry point for the application.
195 // __main() is the entry point for Redlib based applications
196 // main() is the entry point for Newlib based applications
197 //*****************************************************************************
198 #if defined (__REDLIB__)
199 extern void __main(void);
200 #endif
201 extern int main(void);
202 
203 //*****************************************************************************
204 // External declaration for the pointer to the stack top from the Linker Script
205 //*****************************************************************************
206 extern void _vStackTop(void);
207 //*****************************************************************************
208 #if defined (__cplusplus)
209 } // extern "C"
210 #endif
211 //*****************************************************************************
212 // The vector table.
213 // This relies on the linker script to place at correct location in memory.
214 //*****************************************************************************
215 
216 extern void (* const g_pfnVectors[])(void);
217 extern void * __Vectors __attribute__ ((alias ("g_pfnVectors")));
218 
219 __attribute__ ((used, section(".isr_vector")))
220 void (* const g_pfnVectors[])(void) = {
221     // Core Level - CM0P
222     &_vStackTop,                       // The initial stack pointer
223     ResetISR,                          // The reset handler
224     NMI_Handler,                       // NMI Handler
225     HardFault_Handler,                 // Hard Fault Handler
226     0,                                 // Reserved
227     0,                                 // Reserved
228     0,                                 // Reserved
229     0,                                 // Reserved
230     0,                                 // Reserved
231     0,                                 // Reserved
232     0,                                 // Reserved
233     SVC_Handler,                       // SVCall Handler
234     0,                                 // Reserved
235     0,                                 // Reserved
236     PendSV_Handler,                    // PendSV Handler
237     SysTick_Handler,                   // SysTick Handler
238 
239     // Chip Level - K32L2A31A
240     DMA0_04_IRQHandler,          // 16: DMA0 channel 0/4 transfer complete
241     DMA0_15_IRQHandler,          // 17: DMA0 channel 1/5 transfer complete
242     DMA0_26_IRQHandler,          // 18: DMA0 channel 2/6 transfer complete
243     DMA0_37_IRQHandler,          // 19: DMA0 channel 3/7 transfer complete
244     CTI0_DMA0_Error_IRQHandler,  // 20: CTI0 or DMA0 error
245     FLEXIO0_IRQHandler,          // 21: FLEXIO0
246     TPM0_IRQHandler,             // 22: TPM0 single interrupt vector for all sources
247     TPM1_IRQHandler,             // 23: TPM1 single interrupt vector for all sources
248     TPM2_IRQHandler,             // 24: TPM2 single interrupt vector for all sources
249     LPIT0_IRQHandler,            // 25: LPIT0 interrupt
250     LPSPI0_IRQHandler,           // 26: LPSPI0 single interrupt vector for all sources
251     LPSPI1_IRQHandler,           // 27: LPSPI1 single interrupt vector for all sources
252     LPUART0_IRQHandler,          // 28: LPUART0 status and error
253     LPUART1_IRQHandler,          // 29: LPUART1 status and error
254     LPI2C0_IRQHandler,           // 30: LPI2C0 interrupt
255     LPI2C1_IRQHandler,           // 31: LPI2C1 interrupt
256     Reserved32_IRQHandler,       // 32: Reserved interrupt
257     PORTA_IRQHandler,            // 33: PORTA Pin detect
258     PORTB_IRQHandler,            // 34: PORTB Pin detect
259     PORTC_IRQHandler,            // 35: PORTC Pin detect
260     PORTD_IRQHandler,            // 36: PORTD Pin detect
261     PORTE_IRQHandler,            // 37: PORTE Pin detect
262     LLWU_IRQHandler,             // 38: Low leakage wakeup
263     Reserved39_IRQHandler,       // 39: Reserved interrupt
264     USB0_IRQHandler,             // 40: USB0 interrupt
265     ADC0_IRQHandler,             // 41: ADC0 interrupt
266     LPTMR0_IRQHandler,           // 42: LPTMR0 interrupt
267     RTC_Seconds_IRQHandler,      // 43: RTC seconds
268     INTMUX0_0_IRQHandler,        // 44: INTMUX0 channel 0 interrupt
269     INTMUX0_1_IRQHandler,        // 45: INTMUX0 channel 1 interrupt
270     INTMUX0_2_IRQHandler,        // 46: INTMUX0 channel 2 interrupt
271     INTMUX0_3_IRQHandler,        // 47: INTMUX0 channel 3 interrupt
272     LPTMR1_IRQHandler,           // 48: LPTMR1 interrupt  (INTMUX source IRQ0)
273     Reserved49_IRQHandler,       // 49: Reserved interrupt
274     Reserved50_IRQHandler,       // 50: Reserved interrupt
275     Reserved51_IRQHandler,       // 51: Reserved interrupt
276     LPSPI2_IRQHandler,           // 52: LPSPI2 single interrupt vector for all sources (INTMUX source IRQ4)
277     LPUART2_IRQHandler,          // 53: LPUART2 status and error (INTMUX source IRQ5)
278     EMVSIM0_IRQHandler,          // 54: EMVSIM0 interrupt (INTMUX source IRQ6)
279     LPI2C2_IRQHandler,           // 55: LPI2C2 interrupt (INTMUX source IRQ7)
280     TSI0_IRQHandler,             // 56: TSI0 interrupt (INTMUX source IRQ8)
281     PMC_IRQHandler,              // 57: PMC interrupt (INTMUX source IRQ9)
282     FTFA_IRQHandler,             // 58: FTFA interrupt (INTMUX source IRQ10)
283     SCG_IRQHandler,              // 59: SCG interrupt (INTMUX source IRQ11)
284     WDOG0_IRQHandler,            // 60: WDOG0 interrupt (INTMUX source IRQ12)
285     DAC0_IRQHandler,             // 61: DAC0 interrupt (INTMUX source IRQ13)
286     TRNG_IRQHandler,             // 62: TRNG interrupt (INTMUX source IRQ14)
287     RCM_IRQHandler,              // 63: RCM interrupt (INTMUX source IRQ15)
288     CMP0_IRQHandler,             // 64: CMP0 interrupt (INTMUX source IRQ16)
289     CMP1_IRQHandler,             // 65: CMP1 interrupt (INTMUX source IRQ17)
290     RTC_IRQHandler,              // 66: RTC Alarm interrupt (INTMUX source IRQ18)
291 }; /* End of g_pfnVectors */
292 
293 //*****************************************************************************
294 // Functions to carry out the initialization of RW and BSS data sections. These
295 // are written as separate functions rather than being inlined within the
296 // ResetISR() function in order to cope with MCUs with multiple banks of
297 // memory.
298 //*****************************************************************************
299 __attribute__ ((section(".after_vectors.init_data")))
data_init(unsigned int romstart,unsigned int start,unsigned int len)300 void data_init(unsigned int romstart, unsigned int start, unsigned int len) {
301     unsigned int *pulDest = (unsigned int*) start;
302     unsigned int *pulSrc = (unsigned int*) romstart;
303     unsigned int loop;
304     for (loop = 0; loop < len; loop = loop + 4)
305         *pulDest++ = *pulSrc++;
306 }
307 
308 __attribute__ ((section(".after_vectors.init_bss")))
bss_init(unsigned int start,unsigned int len)309 void bss_init(unsigned int start, unsigned int len) {
310     unsigned int *pulDest = (unsigned int*) start;
311     unsigned int loop;
312     for (loop = 0; loop < len; loop = loop + 4)
313         *pulDest++ = 0;
314 }
315 
316 //*****************************************************************************
317 // The following symbols are constructs generated by the linker, indicating
318 // the location of various points in the "Global Section Table". This table is
319 // created by the linker via the Code Red managed linker script mechanism. It
320 // contains the load address, execution address and length of each RW data
321 // section and the execution and length of each BSS (zero initialized) section.
322 //*****************************************************************************
323 extern unsigned int __data_section_table;
324 extern unsigned int __data_section_table_end;
325 extern unsigned int __bss_section_table;
326 extern unsigned int __bss_section_table_end;
327 
328 //*****************************************************************************
329 // Reset entry point for your code.
330 // Sets up a simple runtime environment and initializes the C/C++
331 // library.
332 //*****************************************************************************
333 __attribute__ ((naked, section(".after_vectors.reset")))
ResetISR(void)334 void ResetISR(void) {
335     // Disable interrupts
336     __asm volatile ("cpsid i");
337 
338 #if defined (__USE_CMSIS)
339 // If __USE_CMSIS defined, then call CMSIS SystemInit code
340     SystemInit();
341 
342 #else
343 #if (DISABLE_WDOG)
344     // Disable Watchdog
345     // Write watchdog update key to unlock
346     *((volatile unsigned int *)0x40076004) = 0xD928C520;
347     // Set timeout value
348     *((volatile unsigned int *)0x40076008) = 0xFFFF;
349     // Now disable watchdog via control register
350     volatile unsigned int *WDOG_CS = (unsigned int *) 0x40076000;
351     *WDOG_CS = (*WDOG_CS & ~(1 << 7)) | (1 << 5);
352 #endif // (DISABLE_WDOG)
353 #endif // (__USE_CMSIS)
354 
355     //
356     // Copy the data sections from flash to SRAM.
357     //
358     unsigned int LoadAddr, ExeAddr, SectionLen;
359     unsigned int *SectionTableAddr;
360 
361     // Load base address of Global Section Table
362     SectionTableAddr = &__data_section_table;
363 
364     // Copy the data sections from flash to SRAM.
365     while (SectionTableAddr < &__data_section_table_end) {
366         LoadAddr = *SectionTableAddr++;
367         ExeAddr = *SectionTableAddr++;
368         SectionLen = *SectionTableAddr++;
369         data_init(LoadAddr, ExeAddr, SectionLen);
370     }
371 
372     // At this point, SectionTableAddr = &__bss_section_table;
373     // Zero fill the bss segment
374     while (SectionTableAddr < &__bss_section_table_end) {
375         ExeAddr = *SectionTableAddr++;
376         SectionLen = *SectionTableAddr++;
377         bss_init(ExeAddr, SectionLen);
378     }
379 
380 #if !defined (__USE_CMSIS)
381 // Assume that if __USE_CMSIS defined, then CMSIS SystemInit code
382 // will setup the VTOR register
383 
384     // Check to see if we are running the code from a non-zero
385     // address (eg RAM, external flash), in which case we need
386     // to modify the VTOR register to tell the CPU that the
387     // vector table is located at a non-0x0 address.
388     unsigned int * pSCB_VTOR = (unsigned int *) 0xE000ED08;
389     if ((unsigned int *)g_pfnVectors!=(unsigned int *) 0x00000000) {
390         *pSCB_VTOR = (unsigned int)g_pfnVectors;
391     }
392 #endif // (__USE_CMSIS)
393 #if defined (__cplusplus)
394     //
395     // Call C++ library initialisation
396     //
397     __libc_init_array();
398 #endif
399 
400     // Reenable interrupts
401     __asm volatile ("cpsie i");
402 
403 #if defined (__REDLIB__)
404     // Call the Redlib library, which in turn calls main()
405     __main();
406 #else
407     main();
408 #endif
409 
410     //
411     // main() shouldn't return, but if it does, we'll just enter an infinite loop
412     //
413     while (1) {
414         ;
415     }
416 }
417 
418 //*****************************************************************************
419 // Default core exception handlers. Override the ones here by defining your own
420 // handler routines in your application code.
421 //*****************************************************************************
NMI_Handler(void)422 WEAK_AV void NMI_Handler(void)
423 { while(1) {}
424 }
425 
HardFault_Handler(void)426 WEAK_AV void HardFault_Handler(void)
427 { while(1) {}
428 }
429 
SVC_Handler(void)430 WEAK_AV void SVC_Handler(void)
431 { while(1) {}
432 }
433 
PendSV_Handler(void)434 WEAK_AV void PendSV_Handler(void)
435 { while(1) {}
436 }
437 
SysTick_Handler(void)438 WEAK_AV void SysTick_Handler(void)
439 { while(1) {}
440 }
441 
442 //*****************************************************************************
443 // Processor ends up here if an unexpected interrupt occurs or a specific
444 // handler is not present in the application code.
445 //*****************************************************************************
IntDefaultHandler(void)446 WEAK_AV void IntDefaultHandler(void)
447 { while(1) {}
448 }
449 
450 //*****************************************************************************
451 // Default application exception handlers. Override the ones here by defining
452 // your own handler routines in your application code. These routines call
453 // driver exception handlers or IntDefaultHandler() if no driver exception
454 // handler is included.
455 //*****************************************************************************
DMA0_04_IRQHandler(void)456 WEAK_AV void DMA0_04_IRQHandler(void)
457 {   DMA0_04_DriverIRQHandler();
458 }
459 
DMA0_15_IRQHandler(void)460 WEAK_AV void DMA0_15_IRQHandler(void)
461 {   DMA0_15_DriverIRQHandler();
462 }
463 
DMA0_26_IRQHandler(void)464 WEAK_AV void DMA0_26_IRQHandler(void)
465 {   DMA0_26_DriverIRQHandler();
466 }
467 
DMA0_37_IRQHandler(void)468 WEAK_AV void DMA0_37_IRQHandler(void)
469 {   DMA0_37_DriverIRQHandler();
470 }
471 
CTI0_DMA0_Error_IRQHandler(void)472 WEAK_AV void CTI0_DMA0_Error_IRQHandler(void)
473 {   CTI0_DMA0_Error_DriverIRQHandler();
474 }
475 
FLEXIO0_IRQHandler(void)476 WEAK_AV void FLEXIO0_IRQHandler(void)
477 {   FLEXIO0_DriverIRQHandler();
478 }
479 
TPM0_IRQHandler(void)480 WEAK_AV void TPM0_IRQHandler(void)
481 {   TPM0_DriverIRQHandler();
482 }
483 
TPM1_IRQHandler(void)484 WEAK_AV void TPM1_IRQHandler(void)
485 {   TPM1_DriverIRQHandler();
486 }
487 
TPM2_IRQHandler(void)488 WEAK_AV void TPM2_IRQHandler(void)
489 {   TPM2_DriverIRQHandler();
490 }
491 
LPIT0_IRQHandler(void)492 WEAK_AV void LPIT0_IRQHandler(void)
493 {   LPIT0_DriverIRQHandler();
494 }
495 
LPSPI0_IRQHandler(void)496 WEAK_AV void LPSPI0_IRQHandler(void)
497 {   LPSPI0_DriverIRQHandler();
498 }
499 
LPSPI1_IRQHandler(void)500 WEAK_AV void LPSPI1_IRQHandler(void)
501 {   LPSPI1_DriverIRQHandler();
502 }
503 
LPUART0_IRQHandler(void)504 WEAK_AV void LPUART0_IRQHandler(void)
505 {   LPUART0_DriverIRQHandler();
506 }
507 
LPUART1_IRQHandler(void)508 WEAK_AV void LPUART1_IRQHandler(void)
509 {   LPUART1_DriverIRQHandler();
510 }
511 
LPI2C0_IRQHandler(void)512 WEAK_AV void LPI2C0_IRQHandler(void)
513 {   LPI2C0_DriverIRQHandler();
514 }
515 
LPI2C1_IRQHandler(void)516 WEAK_AV void LPI2C1_IRQHandler(void)
517 {   LPI2C1_DriverIRQHandler();
518 }
519 
Reserved32_IRQHandler(void)520 WEAK_AV void Reserved32_IRQHandler(void)
521 {   Reserved32_DriverIRQHandler();
522 }
523 
PORTA_IRQHandler(void)524 WEAK_AV void PORTA_IRQHandler(void)
525 {   PORTA_DriverIRQHandler();
526 }
527 
PORTB_IRQHandler(void)528 WEAK_AV void PORTB_IRQHandler(void)
529 {   PORTB_DriverIRQHandler();
530 }
531 
PORTC_IRQHandler(void)532 WEAK_AV void PORTC_IRQHandler(void)
533 {   PORTC_DriverIRQHandler();
534 }
535 
PORTD_IRQHandler(void)536 WEAK_AV void PORTD_IRQHandler(void)
537 {   PORTD_DriverIRQHandler();
538 }
539 
PORTE_IRQHandler(void)540 WEAK_AV void PORTE_IRQHandler(void)
541 {   PORTE_DriverIRQHandler();
542 }
543 
LLWU_IRQHandler(void)544 WEAK_AV void LLWU_IRQHandler(void)
545 {   LLWU_DriverIRQHandler();
546 }
547 
Reserved39_IRQHandler(void)548 WEAK_AV void Reserved39_IRQHandler(void)
549 {   Reserved39_DriverIRQHandler();
550 }
551 
USB0_IRQHandler(void)552 WEAK_AV void USB0_IRQHandler(void)
553 {   USB0_DriverIRQHandler();
554 }
555 
ADC0_IRQHandler(void)556 WEAK_AV void ADC0_IRQHandler(void)
557 {   ADC0_DriverIRQHandler();
558 }
559 
LPTMR0_IRQHandler(void)560 WEAK_AV void LPTMR0_IRQHandler(void)
561 {   LPTMR0_DriverIRQHandler();
562 }
563 
RTC_Seconds_IRQHandler(void)564 WEAK_AV void RTC_Seconds_IRQHandler(void)
565 {   RTC_Seconds_DriverIRQHandler();
566 }
567 
INTMUX0_0_IRQHandler(void)568 WEAK_AV void INTMUX0_0_IRQHandler(void)
569 {   INTMUX0_0_DriverIRQHandler();
570 }
571 
INTMUX0_1_IRQHandler(void)572 WEAK_AV void INTMUX0_1_IRQHandler(void)
573 {   INTMUX0_1_DriverIRQHandler();
574 }
575 
INTMUX0_2_IRQHandler(void)576 WEAK_AV void INTMUX0_2_IRQHandler(void)
577 {   INTMUX0_2_DriverIRQHandler();
578 }
579 
INTMUX0_3_IRQHandler(void)580 WEAK_AV void INTMUX0_3_IRQHandler(void)
581 {   INTMUX0_3_DriverIRQHandler();
582 }
583 
LPTMR1_IRQHandler(void)584 WEAK_AV void LPTMR1_IRQHandler(void)
585 {   LPTMR1_DriverIRQHandler();
586 }
587 
Reserved49_IRQHandler(void)588 WEAK_AV void Reserved49_IRQHandler(void)
589 {   Reserved49_DriverIRQHandler();
590 }
591 
Reserved50_IRQHandler(void)592 WEAK_AV void Reserved50_IRQHandler(void)
593 {   Reserved50_DriverIRQHandler();
594 }
595 
Reserved51_IRQHandler(void)596 WEAK_AV void Reserved51_IRQHandler(void)
597 {   Reserved51_DriverIRQHandler();
598 }
599 
LPSPI2_IRQHandler(void)600 WEAK_AV void LPSPI2_IRQHandler(void)
601 {   LPSPI2_DriverIRQHandler();
602 }
603 
LPUART2_IRQHandler(void)604 WEAK_AV void LPUART2_IRQHandler(void)
605 {   LPUART2_DriverIRQHandler();
606 }
607 
EMVSIM0_IRQHandler(void)608 WEAK_AV void EMVSIM0_IRQHandler(void)
609 {   EMVSIM0_DriverIRQHandler();
610 }
611 
LPI2C2_IRQHandler(void)612 WEAK_AV void LPI2C2_IRQHandler(void)
613 {   LPI2C2_DriverIRQHandler();
614 }
615 
TSI0_IRQHandler(void)616 WEAK_AV void TSI0_IRQHandler(void)
617 {   TSI0_DriverIRQHandler();
618 }
619 
PMC_IRQHandler(void)620 WEAK_AV void PMC_IRQHandler(void)
621 {   PMC_DriverIRQHandler();
622 }
623 
FTFA_IRQHandler(void)624 WEAK_AV void FTFA_IRQHandler(void)
625 {   FTFA_DriverIRQHandler();
626 }
627 
SCG_IRQHandler(void)628 WEAK_AV void SCG_IRQHandler(void)
629 {   SCG_DriverIRQHandler();
630 }
631 
WDOG0_IRQHandler(void)632 WEAK_AV void WDOG0_IRQHandler(void)
633 {   WDOG0_DriverIRQHandler();
634 }
635 
DAC0_IRQHandler(void)636 WEAK_AV void DAC0_IRQHandler(void)
637 {   DAC0_DriverIRQHandler();
638 }
639 
TRNG_IRQHandler(void)640 WEAK_AV void TRNG_IRQHandler(void)
641 {   TRNG_DriverIRQHandler();
642 }
643 
RCM_IRQHandler(void)644 WEAK_AV void RCM_IRQHandler(void)
645 {   RCM_DriverIRQHandler();
646 }
647 
CMP0_IRQHandler(void)648 WEAK_AV void CMP0_IRQHandler(void)
649 {   CMP0_DriverIRQHandler();
650 }
651 
CMP1_IRQHandler(void)652 WEAK_AV void CMP1_IRQHandler(void)
653 {   CMP1_DriverIRQHandler();
654 }
655 
RTC_IRQHandler(void)656 WEAK_AV void RTC_IRQHandler(void)
657 {   RTC_DriverIRQHandler();
658 }
659 
660 //*****************************************************************************
661 
662 #if defined (DEBUG)
663 #pragma GCC pop_options
664 #endif // (DEBUG)
665