1 /*
2  * Copyright 2018 NXP
3  * All rights reserved.
4  *
5  * SPDX-License-Identifier: BSD-3-Clause
6  */
7 
8 #ifndef _BOARD_H_
9 #define _BOARD_H_
10 
11 #include "clock_config.h"
12 #include "fsl_gpio.h"
13 
14 /*******************************************************************************
15  * Definitions
16  ******************************************************************************/
17 /*! @brief FRDM-TOUCH board defines */
18 /* Push buttons - mutual electrodes */
19 #define FRDM_TOUCH_BOARD_TSI_MUTUAL_TX_ELECTRODE_1 TF_TSI_MUTUAL_CAP_TX_CHANNEL_3 /* PTE11 */
20 #define FRDM_TOUCH_BOARD_TSI_MUTUAL_RX_ELECTRODE_1 TF_TSI_MUTUAL_CAP_RX_CHANNEL_7 /* PTD6  */
21 #define FRDM_TOUCH_BOARD_TSI_MUTUAL_TX_ELECTRODE_2 TF_TSI_MUTUAL_CAP_TX_CHANNEL_3 /* PTE11 */
22 #define FRDM_TOUCH_BOARD_TSI_MUTUAL_RX_ELECTRODE_2 TF_TSI_MUTUAL_CAP_RX_CHANNEL_6 /* PTD5  */
23 #define FRDM_TOUCH_BOARD_TSI_MUTUAL_TX_ELECTRODE_3 TF_TSI_MUTUAL_CAP_TX_CHANNEL_2 /* PTE10 */
24 #define FRDM_TOUCH_BOARD_TSI_MUTUAL_RX_ELECTRODE_3 TF_TSI_MUTUAL_CAP_RX_CHANNEL_7 /* PTD6  */
25 #define FRDM_TOUCH_BOARD_TSI_MUTUAL_TX_ELECTRODE_4 TF_TSI_MUTUAL_CAP_TX_CHANNEL_2 /* PTE10 */
26 #define FRDM_TOUCH_BOARD_TSI_MUTUAL_RX_ELECTRODE_4 TF_TSI_MUTUAL_CAP_RX_CHANNEL_6 /* PTD5 */
27 
28 /* Slider - self electrodes */
29 #define FRDM_TOUCH_BOARD_TSI_SLIDER_ELECTRODE_1 TF_TSI_SELF_CAP_CHANNEL_10 /* PTD7 */
30 #define FRDM_TOUCH_BOARD_TSI_SLIDER_ELECTRODE_2 TF_TSI_SELF_CAP_CHANNEL_5  /* PTE3 */
31 
32 /* Rotary - self electrodes */
33 #define FRDM_TOUCH_BOARD_TSI_ROTARY_ELECTRODE_1 TF_TSI_SELF_CAP_CHANNEL_0 /* PTE8 */
34 #define FRDM_TOUCH_BOARD_TSI_ROTARY_ELECTRODE_2 TF_TSI_SELF_CAP_CHANNEL_1 /* PTE0 */
35 #define FRDM_TOUCH_BOARD_TSI_ROTARY_ELECTRODE_3 TF_TSI_SELF_CAP_CHANNEL_9 /* PTE1 */
36 #define FRDM_TOUCH_BOARD_TSI_ROTARY_ELECTRODE_4 TF_TSI_SELF_CAP_CHANNEL_8 /* PTE2 */
37 
38 /*! @brief The board name */
39 #define BOARD_NAME "FRDM-KE16Z"
40 
41 /*! @brief The UART to use for debug messages. */
42 #define BOARD_USE_UART
43 #define BOARD_DEBUG_UART_TYPE kSerialPort_Uart
44 #define BOARD_DEBUG_UART_BASEADDR (uint32_t) LPUART0
45 #define BOARD_DEBUG_UART_INSTANCE 0U
46 #define BOARD_DEBUG_UART_CLKSRC kCLOCK_IpSrcSysOscAsync
47 #define BOARD_UART_IRQ LPUART0_IRQn
48 #define BOARD_UART_IRQ_HANDLER LPUART0_IRQHandler
49 
50 /* @Brief Board accelerator sensor configuration */
51 #define BOARD_ACCEL_I2C_BASEADDR LPI2C0
52 #define BOARD_ACCEL_I2C_CLOCK_FREQ CLOCK_GetIpFreq(kCLOCK_Lpi2c0)
53 
54 #ifndef BOARD_DEBUG_UART_BAUDRATE
55 #define BOARD_DEBUG_UART_BAUDRATE 115200
56 #endif /* BOARD_DEBUG_UART_BAUDRATE */
57 
58 /*! @brief The i2c instance used for i2c connection by default */
59 #define BOARD_I2C_BASEADDR I2C0
60 
61 /*! @brief The CMP instance/channel used for board. */
62 #define BOARD_CMP_BASEADDR CMP0
63 #define BOARD_CMP_CHANNEL 0U
64 
65 /*! @brief The rtc instance used for board. */
66 #define BOARD_RTC_FUNC_BASEADDR RTC
67 
68 /*! @brief Indexes of the TSI channels for on-board electrodes */
69 #ifndef BOARD_TSI_ELECTRODE_1
70 #define BOARD_TSI_ELECTRODE_1 0U
71 #endif
72 #ifndef BOARD_TSI_ELECTRODE_2
73 #define BOARD_TSI_ELECTRODE_2 1U
74 #endif
75 
76 /*! @brief Indexes of the TSI mutual channels for FRDM-TOUCH board */
77 #define BOARD_TSI_MUTUAL_TX_ELECTRODE_1 2U
78 #define BOARD_TSI_MUTUAL_RX_ELECTRODE_1 7U
79 
80 /*! @brief Define the port interrupt number for the board switches */
81 #ifndef BOARD_SW3_GPIO
82 #define BOARD_SW3_GPIO GPIOD
83 #endif
84 #ifndef BOARD_SW3_PORT
85 #define BOARD_SW3_PORT PORTD
86 #endif
87 #ifndef BOARD_SW3_GPIO_PIN
88 #define BOARD_SW3_GPIO_PIN 2U
89 #endif
90 #define BOARD_SW3_IRQ PORTBCD_IRQn
91 #define BOARD_SW3_IRQ_HANDLER PORTBCD_IRQHandler
92 #define BOARD_SW3_NAME "SW3"
93 
94 /* Board RGB LED color mapping */
95 #define LOGIC_LED_ON 0U
96 #define LOGIC_LED_OFF 1U
97 #ifndef BOARD_LED_RED_GPIO
98 #define BOARD_LED_RED_GPIO GPIOB
99 #endif
100 #define BOARD_LED_RED_GPIO_PORT PORTB
101 #ifndef BOARD_LED_RED_GPIO_PIN
102 #define BOARD_LED_RED_GPIO_PIN 5U
103 #endif
104 #ifndef BOARD_LED_GREEN_GPIO
105 #define BOARD_LED_GREEN_GPIO GPIOB
106 #endif
107 #define BOARD_LED_GREEN_GPIO_PORT PORTB
108 #ifndef BOARD_LED_GREEN_GPIO_PIN
109 #define BOARD_LED_GREEN_GPIO_PIN 4U
110 #endif
111 #ifndef BOARD_LED_BLUE_GPIO
112 #define BOARD_LED_BLUE_GPIO GPIOD
113 #endif
114 #define BOARD_LED_BLUE_GPIO_PORT PORTD
115 #ifndef BOARD_LED_BLUE_GPIO_PIN
116 #define BOARD_LED_BLUE_GPIO_PIN 1U
117 #endif
118 
119 #define LED_RED1_INIT(output)                                          \
120     GPIO_PinWrite(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PIN, output); \
121     BOARD_LED_RED_GPIO->PDDR |= (1U << BOARD_LED_RED_GPIO_PIN)                         /*!< Enable target LED_RED1 */
122 #define LED_RED1_ON() GPIO_PortClear(BOARD_LED_RED_GPIO, 1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn on target LED_RED1 */
123 #define LED_RED1_OFF() GPIO_PortSet(BOARD_LED_RED_GPIO, 1U << BOARD_LED_RED_GPIO_PIN)  /*!< Turn off target LED_RED1 */
124 #define LED_RED1_TOGGLE() \
125     GPIO_PortToggle(BOARD_LED_RED_GPIO, 1U << BOARD_LED_RED_GPIO_PIN) /*!< Toggle on target LED_RED1 */
126 
127 #define LED_GREEN1_INIT(output)                                            \
128     GPIO_PinWrite(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PIN, output); \
129     BOARD_LED_GREEN_GPIO->PDDR |= (1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Enable target LED_GREEN1 */
130 #define LED_GREEN1_ON() \
131     GPIO_PortClear(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn on target LED_GREEN1 */
132 #define LED_GREEN1_OFF() \
133     GPIO_PortSet(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn off target LED_GREEN1 */
134 #define LED_GREEN1_TOGGLE() \
135     GPIO_PortToggle(BOARD_LED_GREEN_GPIO, 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED_GREEN1 */
136 
137 #define LED_BLUE_INIT(output)                                            \
138     GPIO_PinWrite(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PIN, output); \
139     BOARD_LED_BLUE_GPIO->PDDR |= (1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Enable target LED_BLUE */
140 #define LED_BLUE_ON()                                                                                     \
141     GPIO_PortClear(BOARD_LED_BLUE_GPIO, 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn on target LED_BLUE \ \ \ \
142                                                                              */
143 #define LED_BLUE_OFF()                                                                                   \
144     GPIO_PortSet(BOARD_LED_BLUE_GPIO, 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn off target LED_BLUE \ \ \ \
145                                                                            */
146 #define LED_BLUE_TOGGLE() \
147     GPIO_PortToggle(BOARD_LED_BLUE_GPIO, 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Toggle on target LED_BLUE */
148 
149 #if defined(__cplusplus)
150 extern "C" {
151 #endif /* __cplusplus */
152 
153 /*******************************************************************************
154  * API
155  ******************************************************************************/
156 
157 void BOARD_InitDebugConsole(void);
158 #if defined(SDK_I2C_BASED_COMPONENT_USED) && SDK_I2C_BASED_COMPONENT_USED
159 void BOARD_LPI2C_Init(LPI2C_Type *base, uint32_t clkSrc_Hz);
160 status_t BOARD_LPI2C_Send(LPI2C_Type *base,
161                           uint8_t deviceAddress,
162                           uint32_t subAddress,
163                           uint8_t subaddressSize,
164                           uint8_t *txBuff,
165                           uint8_t txBuffSize);
166 status_t BOARD_LPI2C_Receive(LPI2C_Type *base,
167                              uint8_t deviceAddress,
168                              uint32_t subAddress,
169                              uint8_t subaddressSize,
170                              uint8_t *rxBuff,
171                              uint8_t rxBuffSize);
172 void BOARD_Accel_I2C_Init(void);
173 status_t BOARD_Accel_I2C_Send(uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint32_t txBuff);
174 status_t BOARD_Accel_I2C_Receive(
175     uint8_t deviceAddress, uint32_t subAddress, uint8_t subaddressSize, uint8_t *rxBuff, uint8_t rxBuffSize);
176 #endif /* SDK_I2C_BASED_COMPONENT_USED */
177 
178 #if defined(__cplusplus)
179 }
180 #endif /* __cplusplus */
181 
182 #endif /* _BOARD_H_ */
183