1 /*
2 ** ###################################################################
3 **     Compilers:           Keil ARM C/C++ Compiler
4 **                          Freescale C/C++ for Embedded ARM
5 **                          GNU C Compiler
6 **                          GNU C Compiler - CodeSourcery Sourcery G++
7 **                          IAR ANSI C/C++ Compiler for ARM
8 **
9 **     Reference manual:    MKW40Z160RM, Rev. 1.1, 4/2015
10 **     Version:             rev. 1.2, 2015-05-07
11 **     Build:               b150513
12 **
13 **     Abstract:
14 **         Provides a system configuration function and a global variable that
15 **         contains the system frequency. It configures the device and initializes
16 **         the oscillator (PLL) that is part of the microcontroller device.
17 **
18 **     Copyright (c) 2015 Freescale Semiconductor, Inc.
19 **     All rights reserved.
20 **
21 **     Redistribution and use in source and binary forms, with or without modification,
22 **     are permitted provided that the following conditions are met:
23 **
24 **     o Redistributions of source code must retain the above copyright notice, this list
25 **       of conditions and the following disclaimer.
26 **
27 **     o Redistributions in binary form must reproduce the above copyright notice, this
28 **       list of conditions and the following disclaimer in the documentation and/or
29 **       other materials provided with the distribution.
30 **
31 **     o Neither the name of Freescale Semiconductor, Inc. nor the names of its
32 **       contributors may be used to endorse or promote products derived from this
33 **       software without specific prior written permission.
34 **
35 **     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
36 **     ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
37 **     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
38 **     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
39 **     ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
40 **     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
41 **     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
42 **     ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
43 **     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
44 **     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
45 **
46 **     http:                 www.freescale.com
47 **     mail:                 support@freescale.com
48 **
49 **     Revisions:
50 **     - rev. 1.0 (2014-08-27)
51 **         Initial version.
52 **     - rev. 1.1 (2015-03-05)
53 **         Update with reference manual rev 1.0
54 **     - rev. 1.2 (2015-05-07)
55 **         Update with reference manual rev 1.1
56 **
57 ** ###################################################################
58 */
59 
60 /*!
61  * @file MKW30Z4
62  * @version 1.2
63  * @date 2015-05-07
64  * @brief Device specific configuration file for MKW30Z4 (implementation file)
65  *
66  * Provides a system configuration function and a global variable that contains
67  * the system frequency. It configures the device and initializes the oscillator
68  * (PLL) that is part of the microcontroller device.
69  */
70 
71 #include <stdint.h>
72 #include "fsl_device_registers.h"
73 
74 
75 
76 /* ----------------------------------------------------------------------------
77    -- Core clock
78    ---------------------------------------------------------------------------- */
79 
80 uint32_t SystemCoreClock = DEFAULT_SYSTEM_CLOCK;
81 
82 /* ----------------------------------------------------------------------------
83    -- SystemInit()
84    ---------------------------------------------------------------------------- */
85 
SystemInit(void)86 void SystemInit (void) {
87 
88 #if (DISABLE_WDOG)
89   /* SIM_COPC: COPT=0,COPCLKS=0,COPW=0 */
90   SIM->COPC = (uint32_t)0x00u;
91 #endif /* (DISABLE_WDOG) */
92 #ifdef CLOCK_SETUP
93   if((RCM->SRS0 & RCM_SRS0_WAKEUP_MASK) != 0x00U)
94   {
95     if((PMC->REGSC & PMC_REGSC_ACKISO_MASK) != 0x00U)
96     {
97        PMC->REGSC |= PMC_REGSC_ACKISO_MASK; /* Release hold with ACKISO:  Only has an effect if recovering from VLLSx.*/
98     }
99   } else {
100 #ifdef SYSTEM_RTC_CR_VALUE
101     SIM->SCGC5 |= SIM_SCGC5_PORTB_MASK;
102     SIM_SCGC6 |= SIM_SCGC6_RTC_MASK;
103     /* PORTB_PCR18: ISF=0,MUX=0 */
104     PORTB->PCR[16] &= (uint32_t)~(uint32_t)((PORT_PCR_ISF_MASK | PORT_PCR_MUX(0x07)));
105     /* PORTA_PCR19: ISF=0,MUX=0 */
106     PORTB->PCR[17] &= (uint32_t)~(uint32_t)((PORT_PCR_ISF_MASK | PORT_PCR_MUX(0x07)));
107     if ((RTC->CR & RTC_CR_OSCE_MASK) == 0x00U) { /* Only if the OSCILLATOR is not already enabled */
108       RTC->CR = (uint32_t)((RTC_CR & (uint32_t)~(uint32_t)(RTC_CR_SC2P_MASK | RTC_CR_SC4P_MASK | RTC_CR_SC8P_MASK | RTC_CR_SC16P_MASK)) | (uint32_t)SYSTEM_RTC_CR_VALUE);
109       RTC->CR |= (uint32_t)RTC_CR_OSCE_MASK;
110       RTC->CR &= (uint32_t)~(uint32_t)RTC_CR_CLKO_MASK;
111     }
112 #endif
113   }
114 
115   /* Power mode protection initialization */
116 #ifdef SYSTEM_SMC_PMPROT_VALUE
117   SMC->PMPROT = SYSTEM_SMC_PMPROT_VALUE;
118 #endif
119 
120   /* RF oscillator setting */
121 #if defined(SYSTEM_RSIM_CONTROL_VALUE)
122   RSIM->CONTROL = SYSTEM_RSIM_CONTROL_VALUE;
123 #endif
124 
125   /* System clock initialization */
126   /* Internal reference clock trim initialization */
127 #if defined(SLOW_TRIM_ADDRESS)
128   if ( *((uint8_t*)SLOW_TRIM_ADDRESS) != 0xFFU) { /* Skip if non-volatile flash memory is erased */
129     MCG->C3 = *((uint8_t*)SLOW_TRIM_ADDRESS);
130 #endif /* defined(SLOW_TRIM_ADDRESS) */
131 #if defined(SLOW_FINE_TRIM_ADDRESS)
132     MCG->C4 = (MCG->C4 & ~(MCG_C4_SCFTRIM_MASK)) | ((*((uint8_t*) SLOW_FINE_TRIM_ADDRESS)) & MCG_C4_SCFTRIM_MASK);
133 #endif
134 #if defined(FAST_TRIM_ADDRESS)
135     MCG->C4 = (MCG->C4 & ~(MCG_C4_FCTRIM_MASK)) |((*((uint8_t*) FAST_TRIM_ADDRESS)) & MCG_C4_FCTRIM_MASK);
136 #endif
137 #if defined(FAST_FINE_TRIM_ADDRESS)
138     MCG->C2 = (MCG->C2 & ~(MCG_C2_FCFTRIM_MASK)) | ((*((uint8_t*)FAST_TRIM_ADDRESS)) & MCG_C2_FCFTRIM_MASK);
139 #endif /* defined(FAST_FINE_TRIM_ADDRESS) */
140 #if defined(SLOW_TRIM_ADDRESS)
141   }
142 #endif /* defined(SLOW_TRIM_ADDRESS) */
143 
144   /* Set system prescalers and clock sources */
145   SIM->CLKDIV1 = SYSTEM_SIM_CLKDIV1_VALUE; /* Set system prescalers */
146   SIM->SOPT1 = ((SIM->SOPT1) & (uint32_t)(~(SIM_SOPT1_OSC32KSEL_MASK))) | ((SYSTEM_SIM_SOPT1_VALUE) & (SIM_SOPT1_OSC32KSEL_MASK)); /* Set 32 kHz clock source (ERCLK32K) */
147   SIM->SOPT2 = ((SIM->SOPT2) & (uint32_t)(~(SIM_SOPT2_TPMSRC_MASK))) | ((SYSTEM_SIM_SOPT2_VALUE) & (SIM_SOPT2_TPMSRC_MASK)); /* Selects the clock source for the TPM counter clock. */
148 #if ((MCG_MODE == MCG_MODE_FEI) || (MCG_MODE == MCG_MODE_FBI) || (MCG_MODE == MCG_MODE_BLPI))
149   /* Set MCG */
150   MCG->SC = SYSTEM_MCG_SC_VALUE;       /* Set SC (fast clock internal reference divider) */
151   MCG->C1 = SYSTEM_MCG_C1_VALUE;       /* Set C1 (clock source selection, FLL ext. reference divider, int. reference enable etc.) */
152   /* Check that the source of the FLL reference clock is the requested one. */
153   if (((SYSTEM_MCG_C1_VALUE) & MCG_C1_IREFS_MASK) != 0x00U) {
154     while((MCG->S & MCG_S_IREFST_MASK) == 0x00U) {
155     }
156   } else {
157     while((MCG->S & MCG_S_IREFST_MASK) != 0x00U) {
158     }
159   }
160   MCG->C2 = (MCG->C2 & (uint8_t)(~(MCG_C2_FCFTRIM_MASK))) | (SYSTEM_MCG_C2_VALUE & (uint8_t)(~(MCG_C2_LP_MASK))); /* Set C2 (freq. range, ext. and int. reference selection etc. excluding trim bits; low power bit is set later) */
161   MCG->C4 = ((SYSTEM_MCG_C4_VALUE) & (uint8_t)(~(MCG_C4_FCTRIM_MASK | MCG_C4_SCFTRIM_MASK))) | (MCG->C4 & (MCG_C4_FCTRIM_MASK | MCG_C4_SCFTRIM_MASK)); /* Set C4 (FLL output; trim values not changed) */
162   MCG->C7 = SYSTEM_MCG_C7_VALUE;       /* Set C7 (OSC Clock Select) */
163   #if (MCG_MODE == MCG_MODE_BLPI)
164   /* BLPI specific */
165   MCG->C2 |= (MCG_C2_LP_MASK);         /* Disable FLL and PLL in bypass mode */
166   #endif
167 
168 #else /* MCG_MODE */
169   /* Set MCG */
170   MCG->SC = SYSTEM_MCG_SC_VALUE;       /* Set SC (fast clock internal reference divider) */
171   MCG->C2 = (MCG->C2 & (uint8_t)(~(MCG_C2_FCFTRIM_MASK))) | (SYSTEM_MCG_C2_VALUE & (uint8_t)(~(MCG_C2_LP_MASK))); /* Set C2 (freq. range, ext. and int. reference selection etc. excluding trim bits; low power bit is set later) */
172   MCG->C7 = SYSTEM_MCG_C7_VALUE;       /* Set C7 (OSC Clock Select) */
173   MCG->C1 = SYSTEM_MCG_C1_VALUE;       /* Set C1 (clock source selection, FLL ext. reference divider, int. reference enable etc.) */
174   /* Check that the source of the FLL reference clock is the requested one. */
175   if (((SYSTEM_MCG_C1_VALUE) & MCG_C1_IREFS_MASK) != 0x00U) {
176     while((MCG->S & MCG_S_IREFST_MASK) == 0x00U) {
177     }
178   } else {
179     while((MCG->S & MCG_S_IREFST_MASK) != 0x00U) {
180     }
181   }
182   MCG->C4 = ((SYSTEM_MCG_C4_VALUE)  & (uint8_t)(~(MCG_C4_FCTRIM_MASK | MCG_C4_SCFTRIM_MASK))) | (MCG->C4 & (MCG_C4_FCTRIM_MASK | MCG_C4_SCFTRIM_MASK)); /* Set C4 (FLL output; trim values not changed) */
183 #endif /* MCG_MODE */
184 
185   /* Common for all modes */
186 
187   MCG->C6 = (SYSTEM_MCG_C6_VALUE); /* Set C6 (Clock monitor enable) */
188 #if ((MCG_MODE == MCG_MODE_BLPI) || (MCG_MODE == MCG_MODE_BLPE))
189   MCG->C2 |= (MCG_C2_LP_MASK);         /* Disable FLL in bypass mode */
190 #endif
191 #if ((MCG_MODE == MCG_MODE_FEI) || (MCG_MODE == MCG_MODE_FEE))
192   while((MCG->S & MCG_S_CLKST_MASK) != 0x00U) { /* Wait until output of the FLL is selected */
193   }
194 #elif ((MCG_MODE == MCG_MODE_FBI) || (MCG_MODE == MCG_MODE_BLPI))
195   while((MCG->S & MCG_S_CLKST_MASK) != 0x04U) { /* Wait until internal reference clock is selected as MCG output */
196   }
197 #elif ((MCG_MODE == MCG_MODE_FBE) || (MCG_MODE == MCG_MODE_BLPE))
198   while((MCG->S & MCG_S_CLKST_MASK) != 0x08U) { /* Wait until external reference clock is selected as MCG output */
199   }
200 #endif
201 #if (((SYSTEM_SMC_PMCTRL_VALUE) & SMC_PMCTRL_RUNM_MASK) == (0x02U << SMC_PMCTRL_RUNM_SHIFT))
202   SMC->PMCTRL = (uint8_t)((SYSTEM_SMC_PMCTRL_VALUE) & (SMC_PMCTRL_RUNM_MASK)); /* Enable VLPR mode */
203   while(SMC->PMSTAT != 0x04U) {        /* Wait until the system is in VLPR mode */
204   }
205 #endif
206 #endif
207 }
208 
209 /* ----------------------------------------------------------------------------
210    -- SystemCoreClockUpdate()
211    ---------------------------------------------------------------------------- */
212 
SystemCoreClockUpdate(void)213 void SystemCoreClockUpdate (void) {
214 
215   uint32_t MCGOUTClock;                /* Variable to store output clock frequency of the MCG module */
216   uint16_t Divider;
217 
218   if ((MCG->C1 & MCG_C1_CLKS_MASK) == 0x00U) {
219     /* FLL is selected */
220     if ((MCG->C1 & MCG_C1_IREFS_MASK) == 0x00U) {
221       /* External reference clock is selected */
222       if((MCG->C7 & MCG_C7_OSCSEL_MASK) == 0x00U) {
223         MCGOUTClock = CPU_XTAL_CLK_HZ; /* System oscillator drives MCG clock */
224       } else {
225         MCGOUTClock = CPU_XTAL32k_CLK_HZ; /* RTC 32 kHz oscillator drives MCG clock */
226       }
227       if (((MCG->C2 & MCG_C2_RANGE_MASK) != 0x00U) && ((MCG->C7 & MCG_C7_OSCSEL_MASK) != 0x01U)) {
228         switch (MCG->C1 & MCG_C1_FRDIV_MASK) {
229         case 0x38U:
230           Divider = 1536U;
231           break;
232         case 0x30U:
233           Divider = 1280U;
234           break;
235         default:
236           Divider = (uint16_t)(32LU << ((MCG->C1 & MCG_C1_FRDIV_MASK) >> MCG_C1_FRDIV_SHIFT));
237           break;
238         }
239       } else {/* ((MCG->C2 & MCG_C2_RANGE_MASK) != 0x00U) */
240         Divider = (uint16_t)(1LU << ((MCG->C1 & MCG_C1_FRDIV_MASK) >> MCG_C1_FRDIV_SHIFT));
241       }
242       MCGOUTClock = (MCGOUTClock / Divider); /* Calculate the divided FLL reference clock */
243     } else { /* (!((MCG->C1 & MCG_C1_IREFS_MASK) == 0x00U)) */
244       MCGOUTClock = CPU_INT_SLOW_CLK_HZ; /* The slow internal reference clock is selected */
245     } /* (!((MCG->C1 & MCG_C1_IREFS_MASK) == 0x00U)) */
246     /* Select correct multiplier to calculate the MCG output clock  */
247     switch (MCG->C4 & (MCG_C4_DMX32_MASK | MCG_C4_DRST_DRS_MASK)) {
248       case 0x00U:
249         MCGOUTClock *= 640U;
250         break;
251       case 0x20U:
252         MCGOUTClock *= 1280U;
253         break;
254       case 0x40U:
255         MCGOUTClock *= 1920U;
256         break;
257       case 0x60U:
258         MCGOUTClock *= 2560U;
259         break;
260       case 0x80U:
261         MCGOUTClock *= 732U;
262         break;
263       case 0xA0U:
264         MCGOUTClock *= 1464U;
265         break;
266       case 0xC0U:
267         MCGOUTClock *= 2197U;
268         break;
269       case 0xE0U:
270         MCGOUTClock *= 2929U;
271         break;
272       default:
273         break;
274     }
275   } else if ((MCG->C1 & MCG_C1_CLKS_MASK) == 0x40U) {
276     /* Internal reference clock is selected */
277     if ((MCG->C2 & MCG_C2_IRCS_MASK) == 0x00U) {
278       MCGOUTClock = CPU_INT_SLOW_CLK_HZ; /* Slow internal reference clock selected */
279     } else { /* (!((MCG->C2 & MCG_C2_IRCS_MASK) == 0x00U)) */
280       Divider = (uint16_t)(0x01LU << ((MCG->SC & MCG_SC_FCRDIV_MASK) >> MCG_SC_FCRDIV_SHIFT));
281       MCGOUTClock = (uint32_t) (CPU_INT_FAST_CLK_HZ / Divider); /* Fast internal reference clock selected */
282     } /* (!((MCG->C2 & MCG_C2_IRCS_MASK) == 0x00U)) */
283   } else if ((MCG->C1 & MCG_C1_CLKS_MASK) == 0x80U) {
284     /* External reference clock is selected */
285     if((MCG->C7 & MCG_C7_OSCSEL_MASK) == 0x00U) {
286       MCGOUTClock = CPU_XTAL_CLK_HZ;   /* System oscillator drives MCG clock */
287     } else {
288       MCGOUTClock = CPU_XTAL32k_CLK_HZ; /* RTC 32 kHz oscillator drives MCG clock */
289     }
290   } else { /* (!((MCG->C1 & MCG_C1_CLKS_MASK) == 0x80U)) */
291     /* Reserved value */
292     return;
293   } /* (!((MCG->C1 & MCG_C1_CLKS_MASK) == 0x80U)) */
294   SystemCoreClock = (MCGOUTClock / (0x01U + ((SIM->CLKDIV1 & SIM_CLKDIV1_OUTDIV1_MASK) >> SIM_CLKDIV1_OUTDIV1_SHIFT)));
295 
296 }
297