1 /*
2
3 Copyright (c) 2009-2024 ARM Limited. All rights reserved.
4
5 SPDX-License-Identifier: Apache-2.0
6
7 Licensed under the Apache License, Version 2.0 (the License); you may
8 not use this file except in compliance with the License.
9 You may obtain a copy of the License at
10
11 www.apache.org/licenses/LICENSE-2.0
12
13 Unless required by applicable law or agreed to in writing, software
14 distributed under the License is distributed on an AS IS BASIS, WITHOUT
15 WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
16 See the License for the specific language governing permissions and
17 limitations under the License.
18
19 NOTICE: This file has been modified by Nordic Semiconductor ASA.
20
21 */
22
23 /* NOTE: Template files (including this one) are application specific and therefore expected to
24 be copied into the application project folder prior to its use! */
25
26 #include <stdint.h>
27 #include <stdbool.h>
28 #include "nrf.h"
29 #include "system_nrf54h.h"
30 #include "system_config_sau.h"
31
32 /*lint ++flb "Enter library region" */
33
34 #define __SYSTEM_CLOCK_MHZ (1000000UL)
35 #if defined(NRF_PPR)
36 #define __SYSTEM_CLOCK_DEFAULT (16ul * __SYSTEM_CLOCK_MHZ)
37 #elif defined(NRF_RADIOCORE)
38 #define __SYSTEM_CLOCK_DEFAULT (256ul * __SYSTEM_CLOCK_MHZ)
39 #else
40 #define __SYSTEM_CLOCK_DEFAULT (320ul * __SYSTEM_CLOCK_MHZ)
41 #endif
42
43 #if defined ( __CC_ARM ) || defined ( __GNUC__ )
44 uint32_t SystemCoreClock __attribute__((used)) = __SYSTEM_CLOCK_DEFAULT;
45 #elif defined ( __ICCARM__ )
46 __root uint32_t SystemCoreClock = __SYSTEM_CLOCK_DEFAULT;
47 #endif
48
SystemCoreClockUpdate(void)49 void SystemCoreClockUpdate(void)
50 {
51 #if defined(NRF_PPR)
52 /* PPR clock is always 16MHz */
53 SystemCoreClock = __SYSTEM_CLOCK_DEFAULT;
54 #elif defined(NRF_FLPR)
55 /* FLPR does not have access to its HSFLL, assume default speed. */
56 SystemCoreClock = __SYSTEM_CLOCK_DEFAULT;
57 #else
58 #if !defined(NRF_SKIP_CORECLOCKDETECT) && !defined(NRF_TRUSTZONE_NONSECURE)
59
60 /* CPU should have access to its local HSFLL, measure CPU frequency. */
61 /* If HSFLL is in closed loop mode it's always measuring, and we can just pick the result.*/
62 /* Otherwise, start a frequncy measurement.*/
63 if ((NRF_HSFLL->CLOCKSTATUS & HSFLL_CLOCKSTATUS_MODE_Msk) != HSFLL_CLOCKSTATUS_MODE_ClosedLoop)
64 {
65 /* Start HSFLL frequency measurement */
66 NRF_HSFLL->EVENTS_FREQMDONE = 0ul;
67 NRF_HSFLL->TASKS_FREQMEAS = 1ul;
68 for (volatile uint32_t i = 0ul; i < 200ul && NRF_HSFLL->EVENTS_FREQMDONE != 1ul; i++)
69 {
70 /* Wait until frequency measurement is done */
71 }
72
73 if (NRF_HSFLL->EVENTS_FREQMDONE != 1ul)
74 {
75 /* Clock measurement never completed, return default CPU clock speed */
76 SystemCoreClock = __SYSTEM_CLOCK_DEFAULT;
77 return;
78 }
79 }
80
81 /* Frequency measurement result is a multiple of 16MHz */
82 SystemCoreClock = NRF_HSFLL->FREQM.MEAS * 16ul * __SYSTEM_CLOCK_MHZ;
83 #else
84 SystemCoreClock = __SYSTEM_CLOCK_DEFAULT;
85 #endif
86 #endif
87 }
88
SystemInit(void)89 void SystemInit(void)
90 {
91 #ifdef __CORTEX_M
92 #if !defined(NRF_TRUSTZONE_NONSECURE) && defined(__ARM_FEATURE_CMSE)
93 #if defined(__FPU_PRESENT) && __FPU_PRESENT
94 /* Allow Non-Secure code to run FPU instructions.
95 * If only the secure code should control FPU power state these registers should be configured accordingly in the secure application code. */
96 SCB->NSACR |= (3UL << 10ul);
97 #endif
98 #ifndef NRF_SKIP_SAU_CONFIGURATION
99 configure_default_sau();
100 #endif
101 #endif
102
103 /* Enable the FPU if the compiler used floating point unit instructions. __FPU_USED is a MACRO defined by the
104 * compiler. Since the FPU consumes energy, remember to disable FPU use in the compiler if floating point unit
105 * operations are not used in your code. */
106 #if (__FPU_USED == 1)
107 SCB->CPACR |= (3UL << 20ul) | (3UL << 22ul);
108 __DSB();
109 __ISB();
110 #endif
111 #endif
112
113 #if defined(NFCT_PRESENT)
114 #if defined(CONFIG_NFCT_PINS_AS_GPIOS)
115 NRF_NFCT->PADCONFIG = NFCT_PADCONFIG_ENABLE_Disabled << NFCT_PADCONFIG_ENABLE_Pos;
116 #else
117 NRF_NFCT->PADCONFIG = NFCT_PADCONFIG_ENABLE_Enabled << NFCT_PADCONFIG_ENABLE_Pos;
118 #endif
119 #endif
120 }
121
122 /*lint --flb "Leave library region" */
123
