1| Supported Targets | ESP32 | ESP32-C3 | 2| ----------------- | ----- | -------- | 3 4ESP-IDF Gattc and Gatts Coexistence example 5============================================== 6 7This example demonstrates the coexistence of gattc and gatts. 8 9This example creates a GATT service and starts ADV. The ADV name is `ESP_GATTS_DEMO`, then waits to be connected. At the same time, a gatt client is created, the ADV name is `ESP_GATTS_DEMO`, the device is connected, and the data is exchanged. If the device is not found within 120 seconds, the example will stop scanning. 10 11ESP-IDF also allows users to create a GATT service via an attribute table, rather than add attributes one by one. And it is recommended for users to use. For more information about this method, please refer to [gatt_server_service_table_demo](../../ble/gatt_server_service_table). 12 13To test this example, you can run the [gatt_client_demo](../../ble/gatt_client), which can scan for and connect to this example automatically, and run [gatt_server_demo](../../ble/gatt_server), Waiting to be connected. They will start exchanging data once the GATT client has enabled the notification function of the GATT server. 14 15Please check the [tutorial](../../ble/gatt_server/tutorial/Gatt_Server_Example_Walkthrough.md) for more information about the gatts part of this example. 16Please check the [tutorial](../../ble/gatt_client/tutorial/Gatt_Client_Example_Walkthrough.md) for more information about the gattc part of this example. 17 18
