1 /** 2 * @file gpio.h 3 * @brief General-Purpose Input/Output (GPIO) function prototypes and data types. 4 */ 5 6 /****************************************************************************** 7 * 8 * Copyright (C) 2022-2023 Maxim Integrated Products, Inc. (now owned by 9 * Analog Devices, Inc.), 10 * Copyright (C) 2023-2024 Analog Devices, Inc. 11 * 12 * Licensed under the Apache License, Version 2.0 (the "License"); 13 * you may not use this file except in compliance with the License. 14 * You may obtain a copy of the License at 15 * 16 * http://www.apache.org/licenses/LICENSE-2.0 17 * 18 * Unless required by applicable law or agreed to in writing, software 19 * distributed under the License is distributed on an "AS IS" BASIS, 20 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. 21 * See the License for the specific language governing permissions and 22 * limitations under the License. 23 * 24 ******************************************************************************/ 25 26 /* Define to prevent redundant inclusion */ 27 #ifndef LIBRARIES_PERIPHDRIVERS_INCLUDE_MAX32690_GPIO_H_ 28 #define LIBRARIES_PERIPHDRIVERS_INCLUDE_MAX32690_GPIO_H_ 29 30 /* **** Includes **** */ 31 #include "gpio_regs.h" 32 33 #ifdef __cplusplus 34 extern "C" { 35 #endif 36 37 /** 38 * @defgroup gpio General-Purpose Input/Output (GPIO) 39 * @ingroup periphlibs 40 * @{ 41 */ 42 43 /* **** Definitions **** */ 44 /** 45 * @defgroup gpio_port_pin Port and Pin Definitions 46 * @ingroup gpio 47 * @{ 48 * @defgroup gpio_port Port Definitions 49 * @ingroup gpio_port_pin 50 * @{ 51 */ 52 #define MXC_GPIO_PORT_0 ((uint32_t)(1UL << 0)) /**< Port 0 Define*/ 53 #define MXC_GPIO_PORT_1 ((uint32_t)(1UL << 1)) /**< Port 1 Define*/ 54 #define MXC_GPIO_PORT_2 ((uint32_t)(1UL << 2)) /**< Port 2 Define*/ 55 #define MXC_GPIO_PORT_3 ((uint32_t)(1UL << 3)) /**< Port 3 Define*/ 56 #define MXC_GPIO_PORT_4 ((uint32_t)(1UL << 4)) /**< Port 4 Define*/ 57 /**@} end of gpio_port group*/ 58 /** 59 * @defgroup gpio_pin Pin Definitions 60 * @ingroup gpio_port_pin 61 * @{ 62 */ 63 #define MXC_GPIO_PIN_0 ((uint32_t)(1UL << 0)) /**< Pin 0 Define */ 64 #define MXC_GPIO_PIN_1 ((uint32_t)(1UL << 1)) /**< Pin 1 Define */ 65 #define MXC_GPIO_PIN_2 ((uint32_t)(1UL << 2)) /**< Pin 2 Define */ 66 #define MXC_GPIO_PIN_3 ((uint32_t)(1UL << 3)) /**< Pin 3 Define */ 67 #define MXC_GPIO_PIN_4 ((uint32_t)(1UL << 4)) /**< Pin 4 Define */ 68 #define MXC_GPIO_PIN_5 ((uint32_t)(1UL << 5)) /**< Pin 5 Define */ 69 #define MXC_GPIO_PIN_6 ((uint32_t)(1UL << 6)) /**< Pin 6 Define */ 70 #define MXC_GPIO_PIN_7 ((uint32_t)(1UL << 7)) /**< Pin 7 Define */ 71 #define MXC_GPIO_PIN_8 ((uint32_t)(1UL << 8)) /**< Pin 8 Define */ 72 #define MXC_GPIO_PIN_9 ((uint32_t)(1UL << 9)) /**< Pin 9 Define */ 73 #define MXC_GPIO_PIN_10 ((uint32_t)(1UL << 10)) /**< Pin 10 Define */ 74 #define MXC_GPIO_PIN_11 ((uint32_t)(1UL << 11)) /**< Pin 11 Define */ 75 #define MXC_GPIO_PIN_12 ((uint32_t)(1UL << 12)) /**< Pin 12 Define */ 76 #define MXC_GPIO_PIN_13 ((uint32_t)(1UL << 13)) /**< Pin 13 Define */ 77 #define MXC_GPIO_PIN_14 ((uint32_t)(1UL << 14)) /**< Pin 14 Define */ 78 #define MXC_GPIO_PIN_15 ((uint32_t)(1UL << 15)) /**< Pin 15 Define */ 79 #define MXC_GPIO_PIN_16 ((uint32_t)(1UL << 16)) /**< Pin 16 Define */ 80 #define MXC_GPIO_PIN_17 ((uint32_t)(1UL << 17)) /**< Pin 17 Define */ 81 #define MXC_GPIO_PIN_18 ((uint32_t)(1UL << 18)) /**< Pin 18 Define */ 82 #define MXC_GPIO_PIN_19 ((uint32_t)(1UL << 19)) /**< Pin 19 Define */ 83 #define MXC_GPIO_PIN_20 ((uint32_t)(1UL << 20)) /**< Pin 20 Define */ 84 #define MXC_GPIO_PIN_21 ((uint32_t)(1UL << 21)) /**< Pin 21 Define */ 85 #define MXC_GPIO_PIN_22 ((uint32_t)(1UL << 22)) /**< Pin 22 Define */ 86 #define MXC_GPIO_PIN_23 ((uint32_t)(1UL << 23)) /**< Pin 23 Define */ 87 #define MXC_GPIO_PIN_24 ((uint32_t)(1UL << 24)) /**< Pin 24 Define */ 88 #define MXC_GPIO_PIN_25 ((uint32_t)(1UL << 25)) /**< Pin 25 Define */ 89 #define MXC_GPIO_PIN_26 ((uint32_t)(1UL << 26)) /**< Pin 26 Define */ 90 #define MXC_GPIO_PIN_27 ((uint32_t)(1UL << 27)) /**< Pin 27 Define */ 91 #define MXC_GPIO_PIN_28 ((uint32_t)(1UL << 28)) /**< Pin 28 Define */ 92 #define MXC_GPIO_PIN_29 ((uint32_t)(1UL << 29)) /**< Pin 29 Define */ 93 #define MXC_GPIO_PIN_30 ((uint32_t)(1UL << 30)) /**< Pin 30 Define */ 94 #define MXC_GPIO_PIN_31 ((uint32_t)(1UL << 31)) /**< Pin 31 Define */ 95 /**@} end of gpio_pin group */ 96 /**@} end of gpio_port_pin group */ 97 98 /** 99 * @brief Type alias for a GPIO callback function with prototype: 100 * @code 101 void callback_fn(void *cbdata); 102 * @endcode 103 * @param cbdata A void pointer to the data type as registered when 104 * MXC_GPIO_RegisterCallback() was called. 105 */ 106 typedef void (*mxc_gpio_callback_fn)(void *cbdata); 107 108 /** 109 * @brief Enumeration type for the GPIO Function Type 110 */ 111 typedef enum { 112 MXC_GPIO_FUNC_IN = 0, /**< GPIO Input */ 113 MXC_GPIO_FUNC_OUT, /**< GPIO Output */ 114 MXC_GPIO_FUNC_ALT1, /**< Alternate Function Selection */ 115 MXC_GPIO_FUNC_ALT2, /**< Alternate Function Selection */ 116 MXC_GPIO_FUNC_ALT3, /**< Alternate Function Selection */ 117 MXC_GPIO_FUNC_ALT4, /**< Alternate Function Selection */ 118 } mxc_gpio_func_t; 119 120 /** 121 * @brief Enumeration type for the voltage level on a given pin. 122 */ 123 typedef enum { 124 MXC_GPIO_VSSEL_VDDIO = 0, /**< Set pin to VIDDIO voltage */ 125 MXC_GPIO_VSSEL_VDDIOH, /**< Set pin to VIDDIOH voltage */ 126 } mxc_gpio_vssel_t; 127 128 /** 129 * @brief Enumeration type for drive strength on a given pin. 130 */ 131 typedef enum { 132 MXC_GPIO_DRVSTR_0 = 0, /**< Drive Strength 0 */ 133 MXC_GPIO_DRVSTR_1, /**< Drive Strength 1 */ 134 MXC_GPIO_DRVSTR_2, /**< Drive Strength 2 */ 135 MXC_GPIO_DRVSTR_3, /**< Drive Strength 3 */ 136 } mxc_gpio_drvstr_t; 137 138 /** 139 * @brief Enumeration type for the type of GPIO pad on a given pin. 140 */ 141 typedef enum { 142 MXC_GPIO_PAD_NONE = 0, /**< No pull-up or pull-down */ 143 MXC_GPIO_PAD_PULL_UP, /**< Set pad to strong pull-up */ 144 MXC_GPIO_PAD_PULL_DOWN, /**< Set pad to strong pull-down */ 145 MXC_GPIO_PAD_WEAK_PULL_UP, /**< Set pad to weak pull-up */ 146 MXC_GPIO_PAD_WEAK_PULL_DOWN, /**< Set pad to weak pull-down */ 147 } mxc_gpio_pad_t; 148 149 /** 150 * @brief Structure type for configuring a GPIO port. 151 */ 152 typedef struct { 153 mxc_gpio_regs_t *port; /**< Pointer to GPIO regs */ 154 uint32_t mask; /**< Pin mask (multiple pins may be set) */ 155 mxc_gpio_func_t func; /**< Function type */ 156 mxc_gpio_pad_t pad; /**< Pad type */ 157 mxc_gpio_vssel_t vssel; /**< Voltage select */ 158 mxc_gpio_drvstr_t drvstr; /**< Drive Strength select */ 159 } mxc_gpio_cfg_t; 160 161 /** 162 * @brief Enumeration type for the interrupt modes. 163 */ 164 typedef enum { 165 MXC_GPIO_INT_LEVEL = 0, /**< Interrupt is level sensitive */ 166 MXC_GPIO_INT_EDGE /**< Interrupt is edge sensitive */ 167 } mxc_gpio_int_mode_t; 168 169 /** 170 * @brief Enumeration type for the interrupt polarity. 171 */ 172 typedef enum { 173 MXC_GPIO_INT_FALLING = 0, /**< Interrupt triggers on falling edge */ 174 MXC_GPIO_INT_HIGH, /**< Interrupt triggers when level is high */ 175 MXC_GPIO_INT_RISING, /**< Interrupt triggers on rising edge */ 176 MXC_GPIO_INT_LOW, /**< Interrupt triggers when level is low */ 177 MXC_GPIO_INT_BOTH /**< Interrupt triggers on either edge */ 178 } mxc_gpio_int_pol_t; 179 180 /* **** Function Prototypes **** */ 181 182 /** 183 * @brief Initialize GPIO. 184 * @param portMask Mask for the port to be initialized 185 * @return #E_NO_ERROR if everything is successful. 186 */ 187 int MXC_GPIO_Init(uint32_t portMask); 188 189 /** 190 * @brief Shutdown GPIO. 191 * @param portMask Mask for the port to be initialized 192 * @return #E_NO_ERROR if everything is successful. 193 */ 194 int MXC_GPIO_Shutdown(uint32_t portMask); 195 196 /** 197 * @brief Reset GPIO. 198 * @param portMask Mask for the port to be initialized 199 * @return #E_NO_ERROR if everything is successful. 200 */ 201 int MXC_GPIO_Reset(uint32_t portMask); 202 203 /** 204 * @brief Configure GPIO pin(s). 205 * @param cfg Pointer to configuration structure describing the pin. 206 * @return #E_NO_ERROR if everything is successful. 207 */ 208 int MXC_GPIO_Config(const mxc_gpio_cfg_t *cfg); 209 210 /** 211 * @brief Gets the pin(s) input state. 212 * @param port Pointer to the GPIO port registers 213 * @param mask Mask of the pin(s) to read 214 * @return The requested pin state. 215 */ 216 uint32_t MXC_GPIO_InGet(mxc_gpio_regs_t *port, uint32_t mask); 217 218 /** 219 * @brief Sets the pin(s) to a high level output. 220 * @param port Pointer to the GPIO port registers 221 * @param mask Mask of the pin(s) to set 222 */ 223 void MXC_GPIO_OutSet(mxc_gpio_regs_t *port, uint32_t mask); 224 225 /** 226 * @brief Clears the pin(s) to a low level output. 227 * @param port Pointer to the GPIO port registers 228 * @param mask Mask of the pin(s) to clear 229 */ 230 void MXC_GPIO_OutClr(mxc_gpio_regs_t *port, uint32_t mask); 231 232 /** 233 * @brief Gets the pin(s) output state. 234 * @param port Pointer to the GPIO port registers 235 * @param mask Mask of the pin(s) to read the output state of 236 * @return The state of the requested pin. 237 * 238 */ 239 uint32_t MXC_GPIO_OutGet(mxc_gpio_regs_t *port, uint32_t mask); 240 241 /** 242 * @brief Write the pin(s) to a desired output level. 243 * @param port Pointer to the GPIO port registers 244 * @param mask Mask of the pin(s) to set output level of 245 * @param val Desired output level of the pin(s). This will be masked 246 * with the configuration mask. 247 */ 248 void MXC_GPIO_OutPut(mxc_gpio_regs_t *port, uint32_t mask, uint32_t val); 249 250 /** 251 * @brief Toggles the the pin(s) output level. 252 * @param port Pointer to the GPIO port registers 253 * @param mask Mask of the pin(s) to toggle the output 254 */ 255 void MXC_GPIO_OutToggle(mxc_gpio_regs_t *port, uint32_t mask); 256 257 /** 258 * @brief Configure GPIO interrupt(s) 259 * @param cfg Pointer to configuration structure describing the pin. 260 * @param pol Requested interrupt polarity. 261 * @return #E_NO_ERROR if everything is successful. 262 */ 263 int MXC_GPIO_IntConfig(const mxc_gpio_cfg_t *cfg, mxc_gpio_int_pol_t pol); 264 265 /** 266 * @brief Enables the specified GPIO interrupt 267 * @param port Pointer to the GPIO port registers 268 * @param mask Mask of the pin(s) to enable interrupts for 269 * 270 */ 271 void MXC_GPIO_EnableInt(mxc_gpio_regs_t *port, uint32_t mask); 272 273 /** 274 * @brief Disables the specified GPIO interrupt. 275 * @param port Pointer to the GPIO port registers 276 * @param mask Mask of the pin(s) to disable interrupts for 277 */ 278 void MXC_GPIO_DisableInt(mxc_gpio_regs_t *port, uint32_t mask); 279 280 /** 281 * @brief Gets the interrupt(s) status on a GPIO port 282 * 283 * @param port Pointer to the GPIO port registers 284 * 285 * @return The requested interrupt status. 286 */ 287 uint32_t MXC_GPIO_GetFlags(mxc_gpio_regs_t *port); 288 289 /** 290 * @brief Gets the interrupt(s) status on a GPIO port 291 * 292 * @param port Pointer to the GPIO port registers 293 * @param flags The flags to clear 294 */ 295 void MXC_GPIO_ClearFlags(mxc_gpio_regs_t *port, uint32_t flags); 296 297 /** 298 * @brief Registers a callback for the interrupt on a given port and pin. 299 * @param cfg Pointer to configuration structure describing the pin 300 * @param callback A pointer to a function of type #callback_fn. 301 * @param cbdata The parameter to be passed to the callback function, #callback_fn, when an interrupt occurs. 302 * 303 */ 304 void MXC_GPIO_RegisterCallback(const mxc_gpio_cfg_t *cfg, mxc_gpio_callback_fn callback, 305 void *cbdata); 306 307 /** 308 * @brief GPIO IRQ Handler. @note If a callback is registered for a given 309 * interrupt, the callback function will be called. 310 * 311 * @param port Number of the port that generated the interrupt service routine. 312 * 313 */ 314 void MXC_GPIO_Handler(unsigned int port); 315 316 /** 317 * @brief Set Voltage select for pins to VDDIO or VDDIOH 318 * 319 * @param port Pointer to the GPIO port registers 320 * @param[in] vssel VDDIO or VDDIOH to set the voltatge to 321 * @param[in] mask Pins in the GPIO port that will be set to the voltage. 322 */ 323 int MXC_GPIO_SetVSSEL(mxc_gpio_regs_t *port, mxc_gpio_vssel_t vssel, uint32_t mask); 324 325 /** 326 * @brief Enables GPIO pins to be used as a wakeup source. 327 * 328 * @param port The GPIO port 329 * @param mask Pins in the GPIO port that will be enabled as a wakeup source. 330 */ 331 void MXC_GPIO_SetWakeEn(mxc_gpio_regs_t *port, uint32_t mask); 332 333 /** 334 * @brief Disables GPIO pins from being used as a wakeup source. 335 * 336 * @param port The GPIO port 337 * @param mask Pins in the GPIO port that will be disabled as a wakeup source. 338 */ 339 void MXC_GPIO_ClearWakeEn(mxc_gpio_regs_t *port, uint32_t mask); 340 341 /** 342 * @brief Returns the pins currently enabled as wakeup sources. 343 * 344 * @param port The GPIO port to check. 345 * 346 * @returns The value of the wake enable register. 347 */ 348 uint32_t MXC_GPIO_GetWakeEn(mxc_gpio_regs_t *port); 349 350 /** 351 * @brief Set Drive Strength for pins. 352 * 353 * @param port The GPIO port. 354 * @param[in] ds Drive strength level. Ref /mxc_gpio_ds_t enum type. 355 * @param[in] mask Pins in the GPIO port that will be set to the voltage. 356 */ 357 int MXC_GPIO_SetDriveStrength(mxc_gpio_regs_t *port, mxc_gpio_drvstr_t drvstr, uint32_t mask); 358 359 /**@} end of group gpio */ 360 361 #ifdef __cplusplus 362 } 363 #endif 364 365 #endif // LIBRARIES_PERIPHDRIVERS_INCLUDE_MAX32690_GPIO_H_ 366
