1# Parameters: 2# instance.parameter=value #(type, mode) default = 'def value' : description : [min..max] 3#---------------------------------------------------------------------------------------------- 4fvp_mps2.mps2_visualisation.disable-visualisation=1 # (bool , init-time) default = '0' : Enable/disable visualisation 5cpu0.FPU=1 # (bool , init-time) default = '1' : Set whether the model has VFP support 6cpu0.MVE=2 # (int , init-time) default = '0x1' : Set whether the model has MVE support. If FPU = 0: 0=MVE not included, 1=Integer subset of MVE included. If FPU = 1: 0=MVE not included, 1=Integer subset of MVE included, 2=Integer and half and single precision floating point MVE included 7cpu0.semihosting-enable=1 # (bool , init-time) default = '1' : Enable semihosting SVC traps. Applications that do not use semihosting must set this parameter to false. 8cpu0.semihosting-Thumb_SVC=0xAB # (int , init-time) default = '0xAB' : T32 SVC number for semihosting : [0x0..0xFF] 9cpu0.semihosting-cmd_line="" # (string, init-time) default = '' : Command line available to semihosting SVC calls 10cpu0.semihosting-heap_base=0x0 # (int , init-time) default = '0x0' : Virtual address of heap base : [0x0..0xFFFFFFFF] 11cpu0.semihosting-heap_limit=0x0 # (int , init-time) default = '0x10700000' : Virtual address of top of heap : [0x0..0xFFFFFFFF] 12cpu0.semihosting-stack_base=0x0 # (int , init-time) default = '0x10700000' : Virtual address of base of descending stack : [0x0..0xFFFFFFFF] 13cpu0.semihosting-stack_limit=0x0 # (int , init-time) default = '0x10800000' : Virtual address of stack limit : [0x0..0xFFFFFFFF] 14cpu0.semihosting-cwd="" # (string, init-time) default = '' : Base directory for semihosting file access. 15cpu0.MPU_S=0x8 # (int , init-time) default = '0x8' : Number of regions in the Secure MPU. If Security Extentions are absent, this is ignored : [0x0..0x10] 16cpu0.MPU_NS=0x8 # (int , init-time) default = '0x8' : Number of regions in the Non-Secure MPU. If Security Extentions are absent, this is the total number of MPU regions : [0x0..0x10] 17cpu0.ITM=0 # (bool , init-time) default = '1' : Level of instrumentation trace supported. false : No ITM trace included, true: ITM trace included 18cpu0.IRQLVL=0x3 # (int , init-time) default = '0x3' : Number of bits of interrupt priority : [0x3..0x8] 19cpu0.INITSVTOR=0x00000000 # (int , init-time) default = '0x10000000' : Secure vector-table offset at reset : [0x0..0xFFFFFF80] 20cpu0.INITNSVTOR=0x0 # (int , init-time) default = '0x0' : Non-Secure vector-table offset at reset : [0x0..0xFFFFFF80] 21cpu0.SAU=0x0 # (int , init-time) default = '0x4' : Number of SAU regions (0 => no SAU) : [0x0..0x8] 22idau.NUM_IDAU_REGION=0x0 # (int , init-time) default = '0xA' : 23cpu0.LOCK_SAU=0 # (bool , init-time) default = '0' : Lock down of SAU registers write 24cpu0.LOCK_S_MPU=0 # (bool , init-time) default = '0' : Lock down of Secure MPU registers write 25cpu0.LOCK_NS_MPU=0 # (bool , init-time) default = '0' : Lock down of Non-Secure MPU registers write 26cpu0.CPIF=1 # (bool , init-time) default = '1' : Specifies whether the external coprocessor interface is included 27cpu0.SECEXT=0 # (bool , init-time) default = '1' : Whether the ARMv8-M Security Extensions are included 28fvp_mps2.DISABLE_GATING=1 # (bool , init-time) default = '0' : Disable Memory gating logic 29#---------------------------------------------------------------------------------------------- 30
