1.. zephyr:board:: google_twinkie_v2
2
3Overview
4********
5
6Google Twinkie V2 is a reference board for the google power delivery analyzer
7(PDA) Twinkie V2.
8
9Hardware
10********
11
12- STM32G0B1REI6
13
14Supported Features
15==================
16
17The following features are supported:
18
19+-----------+------------+-------------------------------------+
20| Interface | Controller | Driver/Component                    |
21+===========+============+=====================================+
22| PINMUX    | on-chip    | pinmux                              |
23+-----------+------------+-------------------------------------+
24| GPIO      | on-chip    | gpio                                |
25+-----------+------------+-------------------------------------+
26| CLOCK     | on-chip    | reset and clock control             |
27+-----------+------------+-------------------------------------+
28| FLASH     | on-chip    | flash memory                        |
29+-----------+------------+-------------------------------------+
30
31The default configuration can be found in the defconfig file:
32:zephyr_file:`boards/google/twinkie_v2/google_twinkie_v2_defconfig`
33
34Pin Mapping
35===========
36
37Default Zephyr Peripheral Mapping:
38----------------------------------
39- CC1_BUF : PA1
40- CC2_BUF : PA3
41- VBUS_READ_BUF : PB11
42- CSA_VBUS : PC4
43- CSA_CC2 : PC5
44
45Programming and Debugging
46*************************
47
48Build application as usual for the ``google_twinkie_v2`` board, and flash
49using dfu-util or J-Link.
50
51Debugging
52=========
53
54Use SWD with a J-Link or ST-Link.
55