1/*
2 * Copyright (c) 2022 Nordic Semiconductor ASA
3 *
4 * SPDX-License-Identifier: Apache-2.0
5 */
6
7 &uart0 {
8	compatible = "nordic,nrf-uarte";
9	current-speed = <1000000>;
10	status = "okay";
11	hw-flow-control;
12};
13
14&radio {
15	status = "okay";
16	/* This is an example number of antennas that may be available
17	 * on antenna matrix board.
18	 */
19	dfe-antenna-num = <10>;
20	/* This is an example switch pattern that will be used to set an
21	 * antenna for Tx PDU (period before start of Tx CTE).
22	 */
23	dfe-pdu-antenna = <0x0>;
24
25	/* These are example GPIO pin numbers that are provided to
26	 * Radio peripheral. The pins will be acquired by Radio to
27	 * drive antenna switching when AoD is enabled.
28	 */
29	dfegpio0-gpios = <&gpio0 3 0>;
30	dfegpio1-gpios = <&gpio0 4 0>;
31	dfegpio2-gpios = <&gpio0 28 0>;
32	dfegpio3-gpios = <&gpio0 29 0>;
33};
34