1CONFIG_NETWORKING=y
2CONFIG_NET_UDP=y
3CONFIG_NET_TCP=y
4CONFIG_NET_IPV6=y
5CONFIG_NET_IPV4=y
6#CONFIG_NET_DHCPV4=y
7
8CONFIG_NET_L2_ETHERNET=y
9CONFIG_NET_L2_VIRTUAL=y
10CONFIG_NET_L2_VIRTUAL_MGMT=y
11CONFIG_NET_L2_IPIP=y
12
13CONFIG_NET_MGMT=y
14CONFIG_NET_MGMT_EVENT=y
15
16CONFIG_ENTROPY_GENERATOR=y
17CONFIG_TEST_RANDOM_GENERATOR=y
18CONFIG_INIT_STACKS=y
19
20CONFIG_NET_LOG=y
21CONFIG_LOG=y
22
23CONFIG_NET_STATISTICS=y
24
25CONFIG_NET_PKT_RX_COUNT=32
26CONFIG_NET_PKT_TX_COUNT=32
27CONFIG_NET_BUF_RX_COUNT=32
28CONFIG_NET_BUF_TX_COUNT=32
29
30CONFIG_NET_IF_MAX_IPV6_COUNT=5
31CONFIG_NET_IF_MAX_IPV4_COUNT=5
32CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT=3
33CONFIG_NET_IF_MCAST_IPV6_ADDR_COUNT=4
34CONFIG_NET_MAX_CONTEXTS=10
35
36CONFIG_NET_SHELL=y
37
38CONFIG_NET_CONFIG_SETTINGS=y
39
40# The application will set things up itself so the config module should
41# not try to set things up.
42CONFIG_NET_CONFIG_AUTO_INIT=n
43
44# First ethernet interface will use these settings.
45CONFIG_NET_CONFIG_MY_IPV6_ADDR="2001:db8::1"
46CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1"
47CONFIG_NET_CONFIG_MY_IPV4_NETMASK="255.255.255.0"
48
49# The peer values are used as a tunnel remote address.
50CONFIG_NET_CONFIG_PEER_IPV6_ADDR="2001:db8::2"
51CONFIG_NET_CONFIG_PEER_IPV4_ADDR="192.0.2.2"
52
53# First tunneling interface will have these settings
54CONFIG_NET_SAMPLE_IFACE2_MY_IPV6_ADDR="2001:db8:100::1"
55# TEST-NET-2 from RFC 5737
56CONFIG_NET_SAMPLE_IFACE2_MY_IPV4_ADDR="198.51.100.1"
57CONFIG_NET_SAMPLE_IFACE2_MY_IPV4_NETMASK="255.255.255.0"
58
59# Second tunneling interface
60CONFIG_NET_SAMPLE_IFACE3_MY_IPV6_ADDR="2001:db8:200::1"
61# TEST-NET-3 from RFC 5737
62CONFIG_NET_SAMPLE_IFACE3_MY_IPV4_ADDR="203.0.113.1"
63CONFIG_NET_SAMPLE_IFACE3_MY_IPV4_NETMASK="255.255.255.0"
64