1/*
2 * Copyright (c) 2019 Linaro Ltd.
3 *
4 * SPDX-License-Identifier: Apache-2.0
5 */
6
7/dts-v1/;
8#include <st/mp1/stm32mp157.dtsi>
9#include <st/mp1/stm32mp157aacx-pinctrl.dtsi>
10
11/ {
12	model = "Arrow Electronics STM32MP157A Avenger96 board";
13	compatible = "arrow,stm32mp157a-avenger96";
14
15	chosen {
16		/*
17		 * By default, Zephyr console and shell are assigned to
18		 * remoteproc. To enable console and shell over UART, uncomment
19		 * following lines and set the correct config in
20		 * 96b_avenger96_defconfig. Refer "Serial Port" section in
21		 * Zephyr board documentation.
22		 * zephyr,console = &uart7;
23		 * zephyr,shell-uart = &uart7;
24		 */
25		zephyr,flash = &retram;
26		zephyr,sram = &mcusram;
27	};
28
29	leds {
30		compatible = "gpio-leds";
31		green_led_0: led_0 {
32			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
33			label = "USR0 LED";
34		};
35		green_led_1: led_1 {
36			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
37			label = "USR1 LED";
38		};
39		green_led_2: led_2 {
40			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
41			label = "USR2 LED";
42		};
43	};
44
45	aliases {
46		led0 = &green_led_0;
47		led1 = &green_led_1;
48		led2 = &green_led_2;
49	};
50};
51
52&mailbox {
53	status = "okay";
54};
55
56&uart4 {
57	pinctrl-0 = <&uart4_tx_pd1 &uart4_rx_pb2>;
58	current-speed = <115200>;
59	status = "okay";
60};
61
62&uart7 {
63	pinctrl-0 = <&uart7_tx_pe8 &uart7_rx_pe7>;
64	current-speed = <115200>;
65	status = "okay";
66};
67