| /Zephyr-Core-3.6.0/dts/bindings/clock/ |
| D | st,stm32u5-msi-clock.yaml | 11 - msi-range
15 msi-range:
22 - 0 # range 0 around 48 MHz
23 - 1 # range 1 around 24 MHz
24 - 2 # range 2 around 16 MHz
25 - 3 # range 3 around 12 MHz
26 - 4 # range 4 around 4 MHz (reset value)
27 - 5 # range 5 around 2 MHz
28 - 6 # range 6 around 1.33 MHz
29 - 7 # range 7 around 1 MHz
[all …]
|
| D | st,stm32-msi-clock.yaml | 11 msi-range:
18 - 0 # range 0 around 100 kHz
19 - 1 # range 1 around 200 kHz
20 - 2 # range 2 around 400 kHz
21 - 3 # range 3 around 800 kHz
22 - 4 # range 4 around 1M Hz
23 - 5 # range 5 around 2 MHz
24 - 6 # range 6 around 4 MHz (reset value)
25 - 7 # range 7 around 8 MHz
26 - 8 # range 8 around 16 MHz
[all …]
|
| D | st,stm32l0-msi-clock.yaml | 11 - msi-range
14 msi-range:
21 - 0 # range 0, around 65.536 kHz
22 - 1 # range 1, around 131.072 kHz
23 - 2 # range 2, around 262.144 kHz
24 - 3 # range 3, around 524.288 kHz
25 - 4 # range 4, around 1.048 MHz
26 - 5 # range 5, around 2.097 MHz (reset value)
27 - 6 # range 6, around 4.194 MHz
|
| D | st,stm32u5-pll-clock.yaml | 11 clock in this acceptable range.
45 Valid range: 1 - 16
52 Valid range: 4 - 512
58 Valid range: 1 - 128
64 Valid range: 1 - 128
73 Valid range: 1 - 128
79 Valid range: 0 - 8191
|
| /Zephyr-Core-3.6.0/drivers/fuel_gauge/bq27z746/ |
| D | bq27z746.h | 15 #define BQ27Z746_ATRATE 0x02 /* R/W, Unit: mA, Range: -32768..32767 */
16 #define BQ27Z746_ATRATETIMETOEMPTY 0x04 /* R/O, Unit: minutes, Range: 0..65535 */
17 #define BQ27Z746_TEMPERATURE 0x06 /* R/O, Unit: 0.1 K, Range: 0..32767 */
18 #define BQ27Z746_VOLTAGE 0x08 /* R/O, Unit: mV, Range: 0..32767 */
20 #define BQ27Z746_CURRENT 0x0C /* R/O, Unit: mA, Range: -32768..32767 */
21 #define BQ27Z746_REMAININGCAPACITY 0x10 /* R/O, Unit: mAh, Range: 0..32767 */
22 #define BQ27Z746_FULLCHARGECAPACITY 0x12 /* R/O, Unit: mAh, Range: 0..32767 */
23 #define BQ27Z746_AVERAGECURRENT 0x14 /* R/O, Unit: mA, Range: -32768..32767 */
24 #define BQ27Z746_AVERAGETIMETOEMPTY 0x16 /* R/O, Unit: minutes, Range: 0..65535 */
25 #define BQ27Z746_AVERAGETIMETOFULL 0x18 /* R/O, Unit: minutes, Range: 0..65535 */
[all …]
|
| /Zephyr-Core-3.6.0/include/zephyr/sys/ |
| D | linear_range.h | 20 * @defgroup linear_range Linear Range
23 * The linear range API maps values in a linear range to a range index. A linear
24 * range can be fully defined by four parameters:
47 * A linear range may also be constant, that is, step set to zero.
53 * Implementation uses fixed-width integers. Range is limited to [INT32_MIN,
60 /** @brief Linear range. */
75 * @param _min Minimum value in range.
89 * @brief Obtain the number of values representable in a linear range.
91 * @param[in] r Linear range instance.
103 * @param[in] r Array of linear range instances.
[all …]
|
| /Zephyr-Core-3.6.0/drivers/can/ |
| D | Kconfig.mcux | 35 range 1 96 if SOC_SERIES_S32K3XX
36 range 1 32 if SOC_SERIES_S32K1XX && !SOC_S32K142W && !SOC_S32K144W
37 range 1 64 if SOC_S32K142W || SOC_S32K144W
44 range 1 15 if SOC_SERIES_KINETIS_KE1XF || SOC_SERIES_KINETIS_K6X
45 range 1 13 if SOC_SERIES_IMX_RT && CAN_MCUX_FLEXCAN_FD
46 range 1 63 if SOC_SERIES_IMX_RT
47 range 1 96 if SOC_SERIES_S32K3XX
48 range 1 32 if SOC_SERIES_S32K1XX && !SOC_S32K142W && !SOC_S32K144W
49 range 1 64 if SOC_S32K142W || SOC_S32K144W
|
| /Zephyr-Core-3.6.0/subsys/net/l2/ethernet/lldp/ |
| D | Kconfig | 26 range 1 3600
35 range 1 100
57 range 1 7
76 range 0 0xff
83 range 0 0xff
90 range 0 0xff
97 range 0 0xff
104 range 0 0xff
111 range 0 0xff
127 range 1 7
[all …]
|
| /Zephyr-Core-3.6.0/subsys/bluetooth/audio/ |
| D | Kconfig.bap | 44 range 0 255
52 range 0 255
59 range 1 24
69 range 0 255
77 range 0 255
86 range 1 BT_ISO_MAX_CIG
95 range 1 BT_ISO_MAX_CHAN if BT_ISO_MAX_CHAN < 31
96 range 1 31
105 range 0 255
113 range 0 255
[all …]
|
| /Zephyr-Core-3.6.0/include/zephyr/arch/x86/ |
| D | intel_vtd.h | 53 #define VTD_MTRR_FIX64K_00000_REG 0x120 /* Fixed-range MTRR for 64K_00000 */
54 #define VTD_MTRR_FIX16K_80000_REG 0x128 /* Fixed-range MTRR for 16K_80000 */
55 #define VTD_MTRR_FIX16K_A0000_REG 0x130 /* Fixed-range MTRR for 16K_A0000 */
56 #define VTD_MTRR_FIX4K_C0000_REG 0x138 /* Fixed-range MTRR for 4K_C0000 */
57 #define VTD_MTRR_FIX4K_C8000_REG 0x140 /* Fixed-range MTRR for 4K_C8000 */
58 #define VTD_MTRR_FIX4K_D0000_REG 0x148 /* Fixed-range MTRR for 4K_D0000 */
59 #define VTD_MTRR_FIX4K_D8000_REG 0x150 /* Fixed-range MTRR for 4K_D8000 */
60 #define VTD_MTRR_FIX4K_E0000_REG 0x158 /* Fixed-range MTRR for 4K_E0000 */
61 #define VTD_MTRR_FIX4K_E8000_REG 0x160 /* Fixed-range MTRR for 4K_E8000 */
62 #define VTD_MTRR_FIX4K_F0000_REG 0x168 /* Fixed-range MTRR for 4K_F0000 */
[all …]
|
| /Zephyr-Core-3.6.0/dts/bindings/sensor/ |
| D | espressif,esp32-temp.yaml | 11 range:
16 Temperature range is defined by the temperature offset which is used during
20 - 0 # measure range: 50°C ~ 125°C, error < 3°C
21 - 1 # measure range: 20°C ~ 100°C, error < 2°C
22 - 2 # measure range:-10°C ~ 80°C, error < 1°C
23 - 3 # measure range:-30°C ~ 50°C, error < 2°C
24 - 4 # measure range:-40°C ~ 20°C, error < 3°C
|
| D | we,wsen-pdus.yaml | 16 - 0 # order code 2513130810001, range = -0.1 to +0.1 kPa
17 - 1 # order code 2513130810101, range = -1 to +1 kPa
18 - 2 # order code 2513130810201, range = -10 to +10 kPa
19 - 3 # order code 2513130810301, range = 0 to 100 kPa
20 - 4 # order code 2513130810401, range = -100 to +1000 kPa
21 description: PDUS sensor product variant (pressure measurement range).
|
| /Zephyr-Core-3.6.0/subsys/bluetooth/mesh/ |
| D | sol_pdu_rpl_cli.c | 30 uint16_t primary, range; in handle_status() local
39 range = net_buf_simple_pull_le16(buf); in handle_status()
40 primary = range >> 1; in handle_status()
45 if (range & BIT(0)) { in handle_status()
57 LOG_DBG("SRPL clear status received: range start: %u, range len: %u", in handle_status()
83 uint16_t range; in sol_pdu_rpl_clear_pdu_create() local
85 range = range_start << 1 | (range_len >= 2 ? 1U : 0); in sol_pdu_rpl_clear_pdu_create()
86 net_buf_simple_add_le16(msg, range); in sol_pdu_rpl_clear_pdu_create()
108 LOG_ERR("Invalid range length"); in bt_mesh_sol_pdu_rpl_clear()
113 LOG_ERR("Range outside unicast address range"); in bt_mesh_sol_pdu_rpl_clear()
[all …]
|
| D | sol_pdu_rpl_srv.c | 19 uint16_t range, in sol_rpl_status_rsp() argument
26 net_buf_simple_add_le16(&buf, range); in sol_rpl_status_rsp()
40 uint16_t primary, range; in item_clear() local
49 range = net_buf_simple_pull_le16(buf); in item_clear()
50 primary = range >> 1; in item_clear()
53 if (range & BIT(0)) { in item_clear()
66 LOG_WRN("Range outside unicast address range or equal to 0"); in item_clear()
75 sol_rpl_status_rsp(mod, ctx, range, len); in item_clear()
|
| D | Kconfig | 109 range 0 BT_EXT_ADV_MAX_ADV_SET
158 range 1 256
188 range 1 10
205 range 0 7
213 range 0 7
222 range 0 7
230 range 100 800
326 range 1 4096
334 range 1 4096
342 range 1 4096
[all …]
|
| /Zephyr-Core-3.6.0/include/zephyr/bluetooth/mesh/ |
| D | sol_pdu_rpl_cli.h | 33 * PDU RPL server.The @c start param represents the start of range that server
34 * has cleared. The @c length param represents length of range cleared by server.
38 * @param range_start Range start value.
39 * @param range_length Range length value.
53 /** @brief Remove entries from Solicitation PDU RPL of addresses in given range.
63 * @param range_start Start of Unicast address range.
64 * @param range_len Length of Unicast address range. Valid values are 0x00 and 0x02
66 * @param start_rsp Range start response buffer.
67 * @param len_rsp Range length response buffer.
75 /** @brief Remove entries from Solicitation PDU RPL of addresses in given range (unacked).
[all …]
|
| /Zephyr-Core-3.6.0/samples/sensor/isl29035/ |
| D | README.rst | 14 read sample. If the sensor detects an intensity outside that range the
15 application wakes, displays the intensity, resets the intensity range
40 ALERT 365 lux outside range centered on 0 lux.
44 ALERT 302 lux outside range centered on 365 lux.
47 ALERT 247 lux outside range centered on 302 lux.
50 ALERT 187 lux outside range centered on 247 lux.
53 ALERT 126 lux outside range centered on 187 lux.
56 ALERT 181 lux outside range centered on 126 lux.
59 ALERT 235 lux outside range centered on 181 lux.
62 ALERT 301 lux outside range centered on 235 lux.
[all …]
|
| /Zephyr-Core-3.6.0/soc/arm/nxp_kinetis/ |
| D | Kconfig | 71 range 0 0x18
75 The resulting frequency must be in the range of 2 MHz to 4 MHz.
79 range 0 0x1F
88 range 0 7
92 resulting frequency must be in the range 31.25 kHz to 4 MHz.
96 range 0 7
100 FLL. The resulting frequency must be in the range 31.25 kHz to 39.0625
121 range 0 0xff
130 range 0 0xff
138 range 0 0xff
[all …]
|
| /Zephyr-Core-3.6.0/subsys/net/lib/lwm2m/ |
| D | Kconfig.ucifi | 39 range 1 4
46 range 0 20
54 range 0 20
62 range 0 20
70 range 0 20
79 range 0 64
87 range 0 20
96 range 0 20
|
| /Zephyr-Core-3.6.0/drivers/sensor/mpu6050/ |
| D | Kconfig | 55 int "Accelerometer full-scale range"
58 Magnetometer full-scale range.
59 An X value for the config represents a range of +/- X g. Valid
63 int "Gyroscope full-scale range"
66 Gyroscope full-scale range.
67 An X value for the config represents a range of +/- X degrees/second.
|
| /Zephyr-Core-3.6.0/subsys/bluetooth/controller/ |
| D | Kconfig | 161 range 1 16
172 range 1 18
182 range 1 30
195 range 1 255
205 range 1 4095
215 range 1 64
224 range 1 64
234 range 0 64
369 range -127 127
375 hardware used. Values outside the supported range will be set to the
[all …]
|
| /Zephyr-Core-3.6.0/samples/modules/tflite-micro/magic_wand/train/ |
| D | data_augmentation.py | 32 for i in range(len(data[0]))]
33 for j in range((int(len(data) / molecule) - 1) * denominator)]
34 for i in range(int(len(data) / molecule) - 1):
35 for j in range(len(data[i])):
36 for k in range(denominator):
52 for num in range(5): # pylint: disable=unused-variable
57 tmp_data = [[0 for i in range(len(data[0]))] for j in range(len(data))]
58 for num in range(5):
59 for i in range(len(tmp_data)): # pylint: disable=consider-using-enumerate
60 for j in range(len(tmp_data[i])):
|
| /Zephyr-Core-3.6.0/drivers/ethernet/ |
| D | Kconfig.nxp_s32_netc | 31 range 1 1024
41 range 8 256
48 range 64 1536
56 range 8 256
63 range 64 1536
71 range 1 511
79 range 1 4294967295
90 range 8 128
|
| /Zephyr-Core-3.6.0/drivers/sensor/max30101/ |
| D | Kconfig | 16 range 0 7
42 range 0 15
71 int "ADC range control"
72 range 0 3
75 Set the ADC's full-scale range.
83 range 0 7
101 range 0 0xff
115 range 0 0xff
129 range 0 0xff
145 range 0 7
[all …]
|
| /Zephyr-Core-3.6.0/subsys/portability/cmsis_rtos_v2/ |
| D | Kconfig | 21 range 0 255
30 range 0 255
54 range 0 255
61 range 0 255
68 range 0 255
75 range 0 255
88 range 0 255
101 range 0 255
|
