Searched refs:Set (Results 1 – 25 of 547) sorted by relevance
12345678910>>...22
105 Data.Set EAXI:0x41850014 %LE %Long 0x0106 Data.Set EAXI:0x41850018 %LE %Long 0x0107 Data.Set EAXI:0x4185001C %LE %Long 0x0110 Data.Set DP:0x1C100c0 %LE %Long 0x3cf3cf00111 Data.Set DP:0x1C100c8 %LE %Long 0x3cf3cf00120 ; Set reset value for split-lock mode121 Data.Set EZAXI:&cfgCoreAddr %Long 0yXXXXxxxxXXXXxxxxXXXXxxxxXXXXxxx&(spltLckBit) ; CFG_CORE124 Data.Set EAXI:&rtuStartAddr %Long 0xFFFEF7FF155 Register.Set PC __start181 Data.Set EAXI:0x41900300 %LE %Long 0x5[all …]
24 Set if the 12-bit ADC (ADC12) module is present in the SoC.29 Set if the 16-bit ADC (ADC16) module is present in the SoC.34 Set if the LPADC module is present in the SoC.39 Set if the L1 or L2 cache is present in the SoC.44 Set if the clock control module (CCM) module is present in the SoC.49 Set if the revision 2 of clock control module (CCM) module is present in the SoC.55 Set if the syscon module is present in the SoC.60 Set if the peripheral clock controller module (PCC) module is66 Set if the enhanced LCD interface (eLCDIF) module is present in the72 Set if the MIPI DSI module is present in the SoC.[all …]
11 Set if the low power uart (LPUART) module is present in the SoC.16 Set if the low power i2c (LPI2C) module is present in the SoC.21 Set if the low power spi (LPSPI) module is present in the SoC.26 Set if the Timer/PWM (TPM) module is present in the SoC.31 Set if the flash memory (FTFA, FTFE, or FTFL) module is present in
16 Set if the GPIO module is present in the SoC.21 Set if the I2C module is present in the SoC.26 Set if the EPIT module is present in the SoC.31 Set if the IOMUXC module is present in the SoC.
9 #################### Coordinated Set Identification Service ####################12 bool "Coordinated Set Identification Profile Set Member support"17 This option enables support for Coordinated Set Identification18 Profile Set Member role and the Coordinated Set Identification24 bool "Coordinated Set Identification Service Test Sample Data"40 int "Coordinated Set Identification Profile max service instance count"44 This option sets the maximum number of instances of Coordinated Set58 #################### Coordinated Set Identification Client ####################61 bool "Coordinated Set Identification Profile Set Coordinator Support"66 This option enables support for Coordinated Set Identification[all …]
18 Set if the Back-Up Real Time Counter (BURTC) HAL module is used.24 Set if the Core interrupt handling (CORE) HAL module is used.29 Set if the Analog comparator (ACMP) HAL module is used.34 Set if the Analog to Digital Converter (ADC) HAL module is used.39 Set if the Incremental Analog to Digital Converter (IADC) HAL module is used.44 Set if the Ultra Low Energy Timer/Counter (CRYOTIMER) HAL module is used.49 Set if the Energy Management Unit (EMU) HAL module is used.54 Set if the General Purpose Input/Output (GPIO) HAL module is used.59 Set if the Inter-Integrated Circuit Interface (I2C) HAL module is used.64 Set if the Low Energy Timer (LETIMER) HAL module is used.[all …]
26 Set the Cadence Quad SPI subsector size.32 Set the address memory size in bytes when36 int "Set QSPI to read / write how many bytes per device"39 Set the size for a QSPI to read / write per device.42 int "Set QSPI to read / write how many bytes per block"45 Set the size for a QSPI to read / write per block.
26 prompt "Set the NAND Operating mode"43 int "Set the page count for a single transfer in the CDMA Mode"49 int "Set the block count for a single transfer in the CDMA Mode"
21 setting this register. Set to 0 for no averaging.45 Set the trigger for the FIFO_A_FULL interrupt54 Set to operate in heart rate only mode. The red LED channel is60 Set to operate in SpO2 mode. The red and IR LED channels are active.65 Set to operate in multi-LED mode. The green, red, and/or IR LED75 Set the ADC's full-scale range.86 Set the effective sampling rate with one sample consisting of one104 Set the pulse amplitude to control the LED1 (red) current. The actual118 Set the pulse amplitude to control the LED2 (IR) current. The actual132 Set the pulse amplitude to control the LED3 (green) current. The[all …]
15 Set to 2048 by default18 Set to 1024 by default21 Set to 320 by default24 Set to 1024 by default27 Set to 1024 by default, depends on userspace feature.
44 Set alarm in 2 sec47 Set alarm in 4 sec50 Set alarm in 8 sec53 Set alarm in 16 sec
29 #. :ref:`Set these environment variables <env_vars>`:31 * Set :envvar:`ZEPHYR_TOOLCHAIN_VARIANT` to ``xcc`` or ``xt-clang``.32 * Set :envvar:`XTENSA_TOOLCHAIN_PATH` to the toolchain installation40 * Set :envvar:`XTENSA_CORE` to the SoC ID where application is being42 * Set :envvar:`TOOLCHAIN_VER` to the Xtensa SDK version.46 * Set :envvar:`XTENSA_CORE_{normalized_board_target}`48 * Set :envvar:`TOOLCHAIN_VAR_{normalized_board_target}`77 * Set :envvar:`ZEPHYR_TOOLCHAIN_VARIANT` to ``xt-clang``.
22 #. :ref:`Set these environment variables <env_vars>`:24 - Set :envvar:`ZEPHYR_TOOLCHAIN_VARIANT` to ``gnuarmemb``.25 - Set :envvar:`GNUARMEMB_TOOLCHAIN_PATH` to the toolchain installation51 - Set :envvar:`ZEPHYR_TOOLCHAIN_VARIANT` to ``gnuarmemb``.52 …- Set :envvar:`GNUARMEMB_TOOLCHAIN_PATH` to the brew installation directory (something like ``/usr…
5 bool "Broadcom Set-top box SoC GPIO Driver"9 Enable Driver for Broadcom Set-top box SoC GPIO Banks.
5 bool "Broadcom Set-top box SoC PCIe Driver"9 Enable Driver for Broadcom Set-top box SoC PCIe controllers.
68 addr :Get / Set physical address69 mask :Get / Set address mask71 error_type :Get / Set injection error type79 Set Error Injection parameters with:84 Set injection address base to: 0x100087 Set injection address mask to 7fffffffc090 Set injection error type: correctable
44 ${total} Set Variable 046 Set Encoding ascii72 ${obs_type_str} Set Variable LISTENERS74 ${obs_type_str} Set Variable SUBSCRIBERS76 ${obs_type_str} Set Variable MSG_SUBSCRIBERS
8 Set this if the cross-compile toolchain being used for the build15 Set this if the cross-compile toolchain being used for the build
13 * Set full scale for accelerometer and gyroscope respectively14 * Set data rate for accelerometer and gyroscope respectively17 * Set trigger to accelerometer data ready, and accelerometer any motion.
19 starts this process. Set this to enable 1 shot mode example.26 Set this to enable alerts for high temperatures37 Set this to enable alerts for low temperatures
10 Set this to match the number of SW LED sink connections18 Set this to match the number of CS LED source connections wired up
24 # Set to 'CMAKE_C_COMPILER-NOTFOUND' if no C compiler was found.28 # Set to 'GPERF-NOTFOUND' if gperf was not found.32 # Set to 'OPENOCD-NOTFOUND' if openocd was not found.36 # Set to 'BOSSAC-NOTFOUND' if bossac was not found.40 # Set to 'IMGTOOL-NOTFOUND' if imgtool was not found.107 # Set cached ZEPHYR_TOOLCHAIN_VARIANT.
1 Bluetooth: Coordinated Set Identification Profile Shell9 Set Coordinator (Client)25 Using the Set Coordinator89 Set size 2 (pointer: 0x566fdfe8)122 Set locked133 Set released135 Coordinated Set Member (Server)140 Using the Set Member152 sirk :Set the currently used SIRK <sirk>154 sirk_rsp :Set the response used in SIRK requests <accept, accept_enc,
34 Set the Self-powered attribute in the sample configuration.39 Set the Remote Wakeup attribute in the sample configuration.51 Set bcdUSB value to 0201 and use default USB 2.0 Extension Descriptor.
18 int "Set HDLC RCP IF UART RX ring buffer size"24 int "Set HDLC RCP IF UART TX ring buffer size"
