Searched refs:Tx (Results 1 – 25 of 74) sorted by relevance
123
5 Dynamically control the Tx power of a Bluetooth LE Controller using HCI vendor-specific commands.10 This sample application demonstrates the dynamic Tx power control over the LL12 peripheral advertising with varying Tx power. The initial advertiser TX power15 pattern ranging from -4 dBm to -30 dBm where the Tx power levels decrease every19 the Tx power of the peripheral device is modulated per connection accordingly
36 ${BSIM_OUT_PATH}/results/${simulation_id}/Trace_$i.Tx.pcap \37 ${BSIM_OUT_PATH}/results/${simulation_id}/d_2G4_$i.Tx.csv
14 * antenna for Tx PDU (period before start of Tx CTE).
21 * antenna for Tx PDU (period before start of Tx CTE).
20 * antenna for Tx PDU (period before start of Tx CTE).
7 /* Arduino Header pins: Tx:D9, Rx:D10 */
12 /* internally loop-back Tx and Rx on PAD0 */
29 /* internally loop-back Tx and Rx on PAD0 */
21 int "Tx/Rx modes switching delay time (us)"24 Delay time needed for PLL stabilization during Tx/Rx modes switching.
24 data transfers. All Tx operations are done using dma channel 0 and
57 ${BSIM_OUT_PATH}/results/${simulation_id}/d_2G4_$i.Tx.csv
9 #define INT_UARTA0 21 // UART0 Rx and Tx10 #define INT_UARTA1 22 // UART1 Rx and Tx
57 # The 15.4 driver Tx encryption is currently not functional with this
23 kernel work queue. The maximum number of traffic classes for both Rx and Tx
166 * to generate clock for delay counters and BMC Rx/Tx blocks. The rx is197 * to generate clock for delay counters and BMC Rx/Tx blocks. The rx is
21 # LLDP Tx state machine config33 int "Multiplier of Tx Interval to result on Time to Live value"
42 - IPv4, UDP and TCP checksum (both Rx and Tx)
