/Zephyr-latest/soc/atmel/sam0/common/ |
D | soc_samd2x.c | 63 while (GCLK->STATUS.bit.SYNCBUSY) { in osc8m_init() 71 while (GCLK->STATUS.bit.SYNCBUSY) { in osc8m_init() 166 while (GCLK->STATUS.bit.SYNCBUSY) { in dfll48m_init() 172 while (GCLK->STATUS.bit.SYNCBUSY) { in dfll48m_init() 228 while (GCLK->STATUS.bit.SYNCBUSY) { in gclk_main_configure() 236 while (GCLK->STATUS.bit.SYNCBUSY) { in gclk_main_configure() 249 while (GCLK->STATUS.bit.SYNCBUSY) { in gclk_adc_configure() 257 while (GCLK->STATUS.bit.SYNCBUSY) { in gclk_adc_configure() 275 while (GCLK->STATUS.bit.SYNCBUSY) { in gclk_wdt_configure()
|
D | soc_saml2x.c | 63 while (!OSC32KCTRL->STATUS.bit.OSC32KRDY) { in osc32k_init() 84 while (!OSC32KCTRL->STATUS.bit.XOSC32KRDY) { in xosc32k_init() 101 while (!OSCCTRL->STATUS.bit.OSC16MRDY) { in osc16m_init() 185 while (!OSCCTRL->STATUS.bit.DFLLRDY) { in dfll48m_init() 191 while (!OSCCTRL->STATUS.bit.DFLLLCKC || !OSCCTRL->STATUS.bit.DFLLLCKF) { in dfll48m_init()
|
D | soc_samc2x.c | 30 while (!OSCCTRL->STATUS.bit.OSC48MRDY) { in osc48m_init()
|
D | soc_samd5x.c | 34 while (!OSC32KCTRL->STATUS.bit.XOSC32KRDY) { in osc32k_init() 95 while (!OSCCTRL->STATUS.bit.DFLLRDY) { in dfll_init()
|
/Zephyr-latest/boards/others/neorv32/ |
D | CMakeLists.txt | 17 …message(STATUS "neorv32 binary will be written to: ${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_BIN_NAME}… 27 …message(STATUS "neorv32 VHDL will be written to: ${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_BIN_NAME}.v… 29 …message(STATUS "The neorv32 image_gen utility was not found, neorv32 image files cannot be generat…
|
/Zephyr-latest/cmake/ |
D | verify-toolchain.cmake | 38 message(STATUS "ZEPHYR_TOOLCHAIN_VARIANT: ${ZEPHYR_TOOLCHAIN_VARIANT}") 40 message(STATUS "SDK_VERSION: ${SDK_VERSION}") 44 message(STATUS "ZEPHYR_SDK_INSTALL_DIR : ${ZEPHYR_SDK_INSTALL_DIR}")
|
/Zephyr-latest/cmake/modules/ |
D | git.cmake | 26 message(STATUS "git describe failed: ${stderr}") 28 message(STATUS "git describe warned: ${stderr}")
|
/Zephyr-latest/drivers/ps2/ |
D | ps2_mchp_xec.c | 128 regs->STATUS = MCHP_PS2_STATUS_RW1C_MASK; in ps2_xec_configure() 164 while (((regs->STATUS & in ps2_xec_write() 184 regs->STATUS = MCHP_PS2_STATUS_RW1C_MASK; in ps2_xec_write() 208 regs->STATUS = MCHP_PS2_STATUS_RW1C_MASK; in ps2_xec_inhibit_interface() 303 status = regs->STATUS; in ps2_xec_isr() 320 regs->STATUS = MCHP_PS2_STATUS_RW1C_MASK; in ps2_xec_isr() 327 regs->STATUS = MCHP_PS2_STATUS_RW1C_MASK; in ps2_xec_isr()
|
/Zephyr-latest/drivers/rtc/ |
D | rtc_nxp_irtc.c | 45 while ((reg->STATUS & (uint16_t)RTC_STATUS_WRITE_PROT_EN_MASK) == 0) { in nxp_irtc_unlock_registers() 46 *(uint8_t *)(®->STATUS) |= RTC_STATUS_WE(0x2); in nxp_irtc_unlock_registers() 49 while ((reg->STATUS & (int16_t)RTC_STATUS_WRITE_PROT_EN_MASK) != 0) { in nxp_irtc_unlock_registers() 56 *(volatile uint8_t *)(®->STATUS) = 0x00; in nxp_irtc_unlock_registers() 57 *(volatile uint8_t *)(®->STATUS) = 0x40; in nxp_irtc_unlock_registers() 58 *(volatile uint8_t *)(®->STATUS) = 0xC0; in nxp_irtc_unlock_registers() 59 *(volatile uint8_t *)(®->STATUS) = 0x80; in nxp_irtc_unlock_registers()
|
/Zephyr-latest/samples/boards/nxp/adsp/number_crunching/ |
D | CMakeLists.txt | 15 message(STATUS "LIB_LOCATION environment variable defined") 34 message(STATUS "LIB_LOCATION environment variable NOT defined")
|
/Zephyr-latest/boards/digilent/arty_a7/ |
D | CMakeLists.txt | 25 …message(STATUS "Verilog memory hex dump will be written to: ${PROJECT_BINARY_DIR}/${CONFIG_KERNEL_… 27 …message(STATUS "The bin2hex (${CROSS_COMPILE_TARGET}-bin2hex) utility was not found, verilog memor…
|
/Zephyr-latest/cmake/toolchain/zephyr/ |
D | generic.cmake | 7 message(STATUS "Found toolchain: zephyr ${SDK_VERSION} (${ZEPHYR_SDK_INSTALL_DIR})")
|
/Zephyr-latest/samples/drivers/ipm/ipm_esp32/remote/ |
D | CMakeLists.txt | 7 message(STATUS "${BOARD} compiles as remote in this sample")
|
/Zephyr-latest/cmake/toolchain/host/ |
D | generic.cmake | 9 message(STATUS "Found toolchain: host (gcc/ld)")
|
/Zephyr-latest/samples/drivers/ipm/ipm_mcux/remote/ |
D | CMakeLists.txt | 10 message(STATUS "${BOARD} compiles as remote in this sample")
|
/Zephyr-latest/samples/drivers/ipm/ipm_esp32/ |
D | CMakeLists.txt | 9 message(STATUS "${BOARD} compile as Master in this sample")
|
/Zephyr-latest/boards/shields/nrf7002eb/boards/ |
D | thingy53_nrf5340_cpuapp.overlay | 8 * This uses gpio0 pin 8 which conflicts with STATUS pin of Wi-Fi SR coex
|
/Zephyr-latest/drivers/dac/ |
D | dac_sam0.c | 94 while (regs->STATUS.bit.SYNCBUSY) { in dac_sam0_init() 102 while (regs->STATUS.bit.SYNCBUSY) { in dac_sam0_init()
|
/Zephyr-latest/samples/subsys/ipc/openamp/remote/ |
D | CMakeLists.txt | 12 message(STATUS "${BOARD} compiles as remote in this sample")
|
/Zephyr-latest/cmake/sca/eclair/ |
D | sca.cmake | 6 message(STATUS "Found eclair_env: ${ECLAIR_ENV}") 9 message(STATUS "Found eclair_report: ${ECLAIR_REPORT}") 106 message(STATUS "ECLAIR outputs have been written to: ${ECLAIR_OUTPUT_DIR}") 107 message(STATUS "ECLAIR ECB files have been written to: ${ECLAIR_ANALYSIS_DATA_DIR}")
|
/Zephyr-latest/samples/subsys/ipc/rpmsg_service/remote/ |
D | CMakeLists.txt | 12 message(STATUS "${BOARD} compile as remote in this sample")
|
/Zephyr-latest/modules/hal_nordic/nrf-regtool/ |
D | nrf-regtoolConfig.cmake | 16 message(STATUS "Generated UICR hex file: ${generated_hex_file}") 37 message(STATUS "Generated ${peripheral} hex file: ${generated_hex_file}")
|
/Zephyr-latest/samples/drivers/mbox_data/remote/ |
D | CMakeLists.txt | 13 message(STATUS "${BOARD}${BOARD_QUALIFIERS} compile as remote in this sample")
|
/Zephyr-latest/cmake/sca/cpptest/ |
D | sca.cmake | 6 message(STATUS "Found SCA: Parasoft C/C++test (${CPPTESTSCAN})")
|
/Zephyr-latest/tests/drivers/mbox/mbox_data/remote/ |
D | CMakeLists.txt | 13 message(STATUS "${BOARD}${BOARD_QUALIFIERS} compile as remote in this sample")
|