| /Zephyr-latest/dts/bindings/interrupt-controller/ |
| D | nxp,s32-siul2-eirq.yaml | 21 filter-prescaler:
25 Interrupt filter clock prescaler. The prescaler is applied to the input
27 The prescaled filter clock period is:
35 NXP S32 SIUL2 External Interrupt configuration. Specific filter requirements
40 max-filter-counter = <5>;
43 This will enable a digital filter counter on the corresponding interrupt
44 pads to filter out glitches on the inputs. The digital filter will be
48 max-filter-counter:
53 Maximum Interrupt Filter Counter setting. This value configures the
54 filter counter associated with the digital glitch filter.
[all …]
|
| /Zephyr-latest/dts/bindings/pinctrl/ |
| D | nxp,lpc11u6x-pinctrl.yaml | 16 - nxp,i2c-filter
34 nxp,digital-filter:
43 Enable digital filter. Set number of clock cycles to use as rejection
44 threshold for input pulses. 0 disables the filter. Only valid for
45 lpc11u6x SOC. Filter defaults to disabled, as this is default reset
47 nxp,filter-clock-div:
59 set peripheral clock divider for input filter sampling clock
62 nxp,disable-analog-filter:
65 Disable fixed 10 ns input glitch analog filter. Only valid for lpc11u6x
66 SOC, on analog pins. Note that this filter is enabled on reset, hence
[all …]
|
| /Zephyr-latest/boards/seagate/faze/ |
| D | faze-pinctrl.dtsi | 13 nxp,disable-analog-filter;
22 nxp,i2c-filter = "slow";
23 nxp,disable-analog-filter;
32 nxp,i2c-filter = "fast";
33 nxp,disable-analog-filter;
43 nxp,i2c-filter = "slow";
44 nxp,disable-analog-filter;
54 nxp,i2c-filter = "fast";
55 nxp,disable-analog-filter;
|
| /Zephyr-latest/dts/bindings/input/ |
| D | espressif,esp32-touch-sensor.yaml | 24 filter-mode = <ESP32_TOUCH_FILTER_MODE_IIR_16>;
25 filter-debounce-cnt = <1>;
26 filter-noise-thr = <ESP32_TOUCH_FILTER_NOISE_THR_4_8TH>;
27 filter-jitter-step = <4>;
28 filter-smooth-level = <ESP32_TOUCH_FILTER_SMOOTH_MODE_IIR_2>;
78 filter-mode:
82 Touch sensor IIR filter coefficient.
85 filter-debounce-cnt:
92 filter-noise-thr:
99 filter-jitter-step:
[all …]
|
| /Zephyr-latest/tests/drivers/can/api/src/ |
| D | common.h | 103 * @brief Standard (11-bit) CAN ID filter 1. This filter matches
109 * @brief Standard (11-bit) CAN ID filter 2. This filter matches
115 * @brief Standard (11-bit) CAN ID masked filter 1. This filter matches
121 * @brief Standard (11-bit) CAN ID masked filter 2. This filter matches
127 * @brief Extended (29-bit) CAN ID filter 1. This filter matches
133 * @brief Extended (29-bit) CAN ID filter 2. This filter matches
139 * @brief Extended (29-bit) CAN ID masked filter 1. This filter matches
145 * @brief Extended (29-bit) CAN ID masked filter 2. This filter matches
151 * @brief Standard (11-bit) CAN ID filter. This filter matches
|
| /Zephyr-latest/tests/lib/cbprintf_package/ |
| D | testcase.yaml | 22 filter: CONFIG_CPU_HAS_FPU
31 filter: CONFIG_CPU_HAS_FPU
41 filter: CONFIG_CPU_HAS_FPU
52 filter: CONFIG_CPU_HAS_FPU
88 filter: CONFIG_CPU_HAS_FPU
98 filter: CONFIG_CPU_HAS_FPU
109 filter: CONFIG_CPU_HAS_FPU
121 filter: CONFIG_CPU_HAS_FPU
143 filter: CONFIG_PICOLIBC_SUPPORTED
152 filter: CONFIG_PICOLIBC_SUPPORTED
[all …]
|
| /Zephyr-latest/tests/lib/c_lib/strerror/ |
| D | testcase.yaml | 8 filter: CONFIG_MINIMAL_LIBC_SUPPORTED
15 filter: CONFIG_MINIMAL_LIBC_SUPPORTED
22 filter: CONFIG_NEWLIB_LIBC_SUPPORTED
29 filter: CONFIG_NEWLIB_LIBC_SUPPORTED and CONFIG_HAS_NEWLIB_LIBC_NANO
36 filter: CONFIG_PICOLIBC_SUPPORTED
42 filter: CONFIG_ZEPHYR_PICOLIBC_MODULE
49 filter: CONFIG_ZEPHYR_PICOLIBC_MODULE
|
| /Zephyr-latest/tests/lib/c_lib/thrd/ |
| D | testcase.yaml | 12 filter: not CONFIG_NATIVE_APPLICATION
16 filter: CONFIG_MINIMAL_LIBC_SUPPORTED
22 filter: CONFIG_PICOLIBC_SUPPORTED
27 filter: CONFIG_ZEPHYR_PICOLIBC_MODULE
34 filter: CONFIG_ZEPHYR_PICOLIBC_MODULE
41 filter: CONFIG_NEWLIB_LIBC_SUPPORTED
49 filter: CONFIG_NEWLIB_LIBC_SUPPORTED and CONFIG_HAS_NEWLIB_LIBC_NANO
|
| /Zephyr-latest/tests/lib/cmsis_dsp/transform/ |
| D | testcase.yaml | 7 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_FULL_LIBC_SUPPORTED
12 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_FULL_LIBC_SUPPORTED
26 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_CPU_HAS_FPU
40 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_FULL_LIBC_SUPPORTED
54 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_CPU_HAS_FPU
68 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_FULL_LIBC_SUPPORTED
82 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_CPU_HAS_FPU
94 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_FULL_LIBC_SUPPORTED
108 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_CPU_HAS_FPU
120 filter: (CMSIS_DSP_FLOAT16 and (CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M)
[all …]
|
| /Zephyr-latest/tests/kernel/gen_isr_table/ |
| D | testcase.yaml | 9 filter: CONFIG_GEN_ISR_TABLES and CONFIG_ARMV6_M_ARMV8_M_BASELINE
14 filter: CONFIG_GEN_ISR_TABLES and CONFIG_ARMV6_M_ARMV8_M_BASELINE
34 filter: CONFIG_GEN_ISR_TABLES and CONFIG_ARMV7_M_ARMV8_M_MAINLINE
46 filter: CONFIG_GEN_ISR_TABLES and CONFIG_ARMV6_M_ARMV8_M_BASELINE and not CONFIG_USERSPACE
52 filter: CONFIG_GEN_ISR_TABLES and CONFIG_ARMV6_M_ARMV8_M_BASELINE and not CONFIG_USERSPACE
59 filter: CONFIG_GEN_ISR_TABLES and CONFIG_ARMV6_M_ARMV8_M_BASELINE and not CONFIG_USERSPACE
66 filter: CONFIG_RGF_NUM_BANKS > 1
75 filter: CONFIG_RISCV_PRIVILEGED
81 filter: CONFIG_RISCV_PRIVILEGED and not CONFIG_NRFX_CLIC
|
| /Zephyr-latest/tests/lib/cmsis_dsp/matrix/ |
| D | testcase.yaml | 7 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_FULL_LIBC_SUPPORTED
12 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_FULL_LIBC_SUPPORTED
26 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_CPU_HAS_FPU
41 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_FULL_LIBC_SUPPORTED
55 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_CPU_HAS_FPU
70 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_FULL_LIBC_SUPPORTED
84 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_CPU_HAS_FPU
99 filter: (CONFIG_CMSIS_DSP_FLOAT16 and (CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M)
112 filter: (CONFIG_CMSIS_DSP_FLOAT16 and (CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M)
127 filter: ((CONFIG_CPU_AARCH32_CORTEX_R or CONFIG_CPU_CORTEX_M) and CONFIG_FULL_LIBC_SUPPORTED
[all …]
|
| /Zephyr-latest/tests/lib/c_lib/common/ |
| D | testcase.yaml | 10 filter: CONFIG_MINIMAL_LIBC_SUPPORTED
17 filter: CONFIG_NEWLIB_LIBC_SUPPORTED
23 filter: CONFIG_NEWLIB_LIBC_SUPPORTED and CONFIG_HAS_NEWLIB_LIBC_NANO
29 filter: CONFIG_PICOLIBC_SUPPORTED
34 filter: CONFIG_ZEPHYR_PICOLIBC_MODULE
40 filter: CONFIG_ZEPHYR_PICOLIBC_MODULE
|
| /Zephyr-latest/subsys/net/l2/ieee802154/ |
| D | ieee802154_utils.h | 124 * Sets the radio drivers extended address filter.
136 struct ieee802154_filter filter; in ieee802154_radio_filter_ieee_addr() local
138 filter.ieee_addr = ieee_addr; in ieee802154_radio_filter_ieee_addr()
140 if (radio->filter(net_if_get_device(iface), true, in ieee802154_radio_filter_ieee_addr()
142 &filter) != 0) { in ieee802154_radio_filter_ieee_addr()
143 NET_WARN("Could not apply IEEE address filter"); in ieee802154_radio_filter_ieee_addr()
155 struct ieee802154_filter filter; in ieee802154_radio_filter_short_addr() local
157 filter.short_addr = short_addr; in ieee802154_radio_filter_short_addr()
159 if (radio->filter(net_if_get_device(iface), true, in ieee802154_radio_filter_short_addr()
161 &filter) != 0) { in ieee802154_radio_filter_short_addr()
[all …]
|
| /Zephyr-latest/tests/posix/fs/ |
| D | testcase.yaml | 2 filter: not CONFIG_NATIVE_LIBC
25 filter: TOOLCHAIN_HAS_NEWLIB == 1
29 filter: CONFIG_ARCH_HAS_THREAD_LOCAL_STORAGE and CONFIG_TOOLCHAIN_SUPPORTS_THREAD_LOCAL_STORAGE
34 filter: TOOLCHAIN_HAS_NEWLIB == 1 and CONFIG_ARCH_HAS_THREAD_LOCAL_STORAGE and
41 filter: CONFIG_PICOLIBC_SUPPORTED
46 filter: CONFIG_PICOLIBC_SUPPORTED
|
| /Zephyr-latest/tests/drivers/uart/uart_elementary/ |
| D | testcase.yaml | 11 filter: CONFIG_SERIAL_SUPPORT_INTERRUPT
27 filter: CONFIG_SERIAL_SUPPORT_INTERRUPT
34 filter: CONFIG_SERIAL_SUPPORT_INTERRUPT
43 filter: CONFIG_SERIAL_SUPPORT_INTERRUPT
51 filter: CONFIG_SERIAL_SUPPORT_INTERRUPT
59 filter: CONFIG_SERIAL_SUPPORT_INTERRUPT
68 filter: CONFIG_SERIAL_SUPPORT_INTERRUPT
75 filter: CONFIG_SERIAL_SUPPORT_INTERRUPT
|
| /Zephyr-latest/include/zephyr/drivers/sensor/ |
| D | icm42670.h | 33 * In Low-Noise Mode, the ADC output is sent through an Anti-Alias Filter
34 * (AAF). The AAF is a filter with fixed coefficients (not user configurable),
36 * Filter (LPF) with user selectable filter bandwidth options.
38 * filter, with user configurable average filter setting.
39 * The output of 1st Order LPF in Low-Noise Mode, or Average filter in Low-Power
45 /** Low-pass filter configuration */
|
| /Zephyr-latest/boards/nxp/lpcxpresso11u68/ |
| D | lpcxpresso11u68-pinctrl.dtsi | 13 nxp,disable-analog-filter;
21 nxp,disable-analog-filter;
30 nxp,i2c-filter = "slow";
31 nxp,disable-analog-filter;
40 nxp,i2c-filter = "fast";
41 nxp,disable-analog-filter;
|
| /Zephyr-latest/tests/lib/newlib/thread_safety/ |
| D | testcase.yaml | 2 filter: TOOLCHAIN_HAS_NEWLIB == 1
20 filter: CONFIG_ARCH_HAS_USERSPACE
29 filter: CONFIG_ARCH_HAS_USERSPACE
39 filter: CONFIG_HAS_NEWLIB_LIBC_NANO
45 filter: CONFIG_HAS_NEWLIB_LIBC_NANO
52 filter: CONFIG_ARCH_HAS_USERSPACE and CONFIG_HAS_NEWLIB_LIBC_NANO
62 filter: CONFIG_ARCH_HAS_USERSPACE and CONFIG_HAS_NEWLIB_LIBC_NANO
|
| /Zephyr-latest/tests/kernel/common/ |
| D | testcase.yaml | 13 filter: >
22 filter: not ((CONFIG_I2C or CONFIG_SPI) and CONFIG_USERSPACE)
30 filter: CONFIG_MINIMAL_LIBC_SUPPORTED
42 filter: not CONFIG_KERNEL_COHERENCE
54 filter: not CONFIG_KERNEL_COHERENCE
64 filter: CONFIG_PICOLIBC_SUPPORTED
75 filter: CONFIG_ISR_TABLES_LOCAL_DECLARATION_SUPPORTED and not CONFIG_CODE_DATA_RELOCATION
|
| /Zephyr-latest/dts/bindings/gpio/ |
| D | adi,max22190-gpio.yaml | 10 filter-wbes = <CH0 CH1 CH2 ... CH7 > for wire break
12 filter-fbps and filter-delays.
35 filter-wbes = <1 0 0 0 0 0 0 0>; // wirebreak WBEx
36 filter-fbps = <0 0 0 0 0 0 0 0>; // programmable filter INx
37 filter-delays = <50 100 400 800 1600 3200 12800 20000>; // 1000 us == 1ms
82 filter-wbes:
88 WBE bit in all Filter registers stand for wire break enable on each
95 filter-fbps:
101 Enable or disable filter
103 - 0 mean filter is used
[all …]
|
| /Zephyr-latest/tests/drivers/uart/uart_basic_api/ |
| D | testcase.yaml | 6 filter: CONFIG_UART_CONSOLE
16 filter: CONFIG_UART_CONSOLE
28 filter: CONFIG_UART_CONSOLE
38 filter: CONFIG_UART_CONSOLE
49 filter: CONFIG_UART_CONSOLE
56 filter: CONFIG_UART_CONSOLE
|
| /Zephyr-latest/tests/arch/arm/arm_thread_swap/ |
| D | testcase.yaml | 2 filter: CONFIG_ARMV6_M_ARMV8_M_BASELINE or CONFIG_ARMV7_M_ARMV8_M_MAINLINE
9 filter: not CONFIG_TRUSTED_EXECUTION_NONSECURE
11 filter: not CONFIG_TRUSTED_EXECUTION_NONSECURE
19 filter: not CONFIG_TRUSTED_EXECUTION_NONSECURE and CONFIG_ARMV7_M_ARMV8_M_FP
24 filter: not CONFIG_TRUSTED_EXECUTION_NONSECURE and CONFIG_ARMV7_M_ARMV8_M_FP
|
| /Zephyr-latest/tests/drivers/uart/uart_async_api/ |
| D | testcase.yaml | 11 filter: CONFIG_SERIAL_SUPPORT_ASYNC and not CONFIG_UART_MCUX_LPUART
17 filter: CONFIG_SERIAL_SUPPORT_ASYNC and not CONFIG_UART_MCUX_LPUART
35 filter: CONFIG_SERIAL_SUPPORT_ASYNC
43 filter: CONFIG_SERIAL_SUPPORT_ASYNC
53 filter: CONFIG_SERIAL_SUPPORT_ASYNC and CONFIG_HAS_SEGGER_RTT
66 filter: CONFIG_SERIAL_SUPPORT_ASYNC and CONFIG_UART_MCUX_LPUART and not CONFIG_CPU_HAS_DCACHE
70 filter: CONFIG_SERIAL_SUPPORT_ASYNC and CONFIG_UART_MCUX_LPUART and CONFIG_CPU_HAS_DCACHE
78 filter: CONFIG_SERIAL_SUPPORT_ASYNC and CONFIG_SOC_FAMILY_ATMEL_SAM0
94 filter: CONFIG_SERIAL_SUPPORT_ASYNC and CONFIG_CPU_HAS_DCACHE
|
| /Zephyr-latest/samples/subsys/shell/shell_module/ |
| D | sample.yaml | 4 filter: not CONFIG_NATIVE_LIBC
10 filter: CONFIG_SERIAL and dt_chosen_enabled("zephyr,shell-uart")
30 filter: CONFIG_SERIAL and dt_chosen_enabled("zephyr,shell-uart")
40 filter: CONFIG_SERIAL and dt_chosen_enabled("zephyr,shell-uart") and not CONFIG_NEWLIB_LIBC
46 filter: CONFIG_HAS_SEGGER_RTT
60 filter: CONFIG_DT_HAS_ZEPHYR_NUS_UART_ENABLED
68 filter: CONFIG_SERIAL and dt_chosen_enabled("zephyr,shell-uart")
|
| /Zephyr-latest/tests/kernel/interrupt/ |
| D | testcase.yaml | 9 filter: not CONFIG_TRUSTED_EXECUTION_NONSECURE
15 filter: not CONFIG_TRUSTED_EXECUTION_NONSECURE
19 filter: not CONFIG_TRUSTED_EXECUTION_NONSECURE and CONFIG_MINIMAL_LIBC_SUPPORTED
30 filter: not CONFIG_TRUSTED_EXECUTION_NONSECURE and CONFIG_MINIMAL_LIBC_SUPPORTED
58 filter: not CONFIG_TRUSTED_EXECUTION_NONSECURE
79 filter: >
83 filter: CONFIG_MULTI_LEVEL_INTERRUPTS
|
