Searched full:coefficient (Results 1 – 25 of 31) sorted by relevance
12
74 prompt "BME680 IIR low-pass filter coefficient"77 Select the filter coefficient for the BME680 sensor.
111 prompt "BME280 filter coefficient"114 Select the filter coefficient for the BME280 sensor.
23 Family Temperature Coefficient
21 Negative Temperature Coefficient
87 temperature-coefficient:92 Selects the magnet temperature coefficient.
96 Default IIR filter coefficient. The default 0 is the chip reset value.
97 Default IIR filter coefficient. The default 0 is the chip reset value.
82 Touch sensor IIR filter coefficient.96 Touch sensor noise threshold coefficient.
72 #define NT35510_CMD_WRLSCC 0x65 /* Write light sensor compensation coefficient value */73 #define NT35510_CMD_RDLSCCM 0x66 /* Read light sensor compensation coefficient value MSBs */74 #define NT35510_CMD_RDLSCCL 0x67 /* Read light sensor compensation coefficient value LSBs */
22 /* Touch sensor level of filter noise threshold coefficient*/
63 * RTD coefficient C is required only for temperatures64 * below 0 deg. C. The selected RTD coefficient set
112 * Size of a single coefficient is 20-bit. Coefficients may be sent in either unpacked form where114 * (FIR_COEFFS_PACKED_TO_24_BITS) value to indicate packed form (unpacked coefficient has always
23 /* Base addresses (in PDM scope) of 2ch PDM controllers and coefficient RAM. */38 * @brief Move pointer to next coefficient data40 * @return Returns pointer right after coefficient data651 /* Array of pointers to pdm coefficient data. Used to reuse coefficient from another pdm. */ in dai_dmic_set_config_nhlt()
56 clock output margin coefficient
50 /* Temperature coefficient */
115 * @param[in] *coef - points to coefficient buffer118 * @param[in] mu - step size that controls filter coefficient updates
86 * coefficient115 * coefficient. Important: please reflect the poly. For example,133 * coefficient334 * coefficient382 * @param poly The polynomial to use omitting the leading coefficient
62 * Initialize the state and coefficient buffers for all Bi-quad sections in real_block_iir_32()
117 /* Allocate coefficient buffer */ in test_arm_spline()
255 /* coefficient is 2nd compliment */ in dps310_calib_coeff_creation()261 /* coefficient is 2nd compliment */ in dps310_calib_coeff_creation()269 /* coefficient is 2nd compliment */ in dps310_calib_coeff_creation()276 /* coefficient is 2nd compliment */ in dps310_calib_coeff_creation()
268 /* Enable the power gating capability of the coefficient. */289 /* Write in the coefficient memory will mute the output for the N audio clocks */
102 /* Device factor coefficient for lux calculations */
519 /* Set IIR filter coefficient */ in bmp388_init()522 LOG_ERR("Failed to set IIR coefficient."); in bmp388_init()
34 /* Engineering value of the ramp coefficient in Hz / °C */
271 /* Write in the coefficient memory will mute the output for the N audio clocks */
