Searched full:bootloaders (Results 1 – 18 of 18) sorted by relevance
13 * :zephyr_file:`subsys/dfu/boot/`: Interface code to bootloaders49 Bootloaders section in Device Firmware Upgrade
63 …wget https://raw.githubusercontent.com/arduino/ArduinoCore-renesas/main/bootloaders/UNO_R4/dfu_min…
73 # enough time to A57 bootloaders to set-up dram
5 '''UF2 runner (flash only) for UF2 compatible bootloaders.'''
8 * Bootloaders
66 * it, not through the reset vector mechanism. Such bootloaders might want to
167 * enabled by bootloaders, for example. in rv32m1_intmux_init()
58 * when using bootloaders in osc8m_init()
85 # for consumption by bootloaders such as MCUboot.
150 other systems such as bootloaders (for MCUboot, this would include the image swap669 UF2 bootloaders only accept UF2 files with a matching family ID.
481 Bootloaders:
17 can be used when building applications which target supported bootloaders (e.g. MCUboot) allowing38 restrictions depending upon what the version is used for, e.g. bootloaders might only support some
314 This case is valid for ROM bootloaders that define image start at 0 and
281 ``16``). Bootloaders that use a part of the SRAM should set this value to an
831 some Arduino IDE bootloaders.847 bootloaders. The ``.bin`` file is still used as a fallback if a HEX File
81 For bootloaders that reside on flash, the devicetree partition layout is
567 by a bootloader. Application images chain-loadable by bootloaders (or other applications)
