Lines Matching +full:drive +full:- +full:mode
5 # SPDX-License-Identifier: Apache-2.0
18 Boot-ROM. Use the full Microchip SPI image generator program for
19 authentication and all other Boot-ROM loader features. Refer to the MCHP
58 prompt "Reading mode used by the SPI flash"
61 This sets the reading mode that can be used by the SPI flash.
65 bool "SPI flash operates full-duplex with frequency (< 25 MHz)"
68 bool "SPI flash operates full-duplex with fast reading mode"
71 bool "SPI flash operates with dual data reading mode"
74 bool "SPI flash operates with quad data reading mode"
139 prompt "Flash drive strength"
145 bool "SPI flash drive strength multiplier 1"
150 bool "SPI flash drive strength multiplier 2"
155 bool "SPI flash drive strength multiplier 4"
160 bool "SPI flash drive strength multiplier 6"
195 int "Flash SPI Mode"
201 to the data sheet. Default value is 0 corresponding to SPI Mode 0
203 Setting this field to 0 selects mode 0, CPOL=0, CPHA_MOSI=0, CPHA_MISO=0
204 Setting this filed to 7 selects mode 3, CPOL=1, CPHA_MOSI=1, CPHA_MISO=1
227 or other non-JTAG alternate functions.
232 JTAG port in SWD mode.
237 JTAG port is enabled in SWD mode.
245 Select tracing mode for debug interface
250 JTAG port in SWD mode and ETM as tracing method.
251 ETM re-assigns 5 pins for clock and 4-bit data bus.
257 JTAG port in SWD mode and SWV as tracing method.