Lines Matching +full:de +full:- +full:deassert +full:- +full:time

2 # SPDX-License-Identifier: Apache-2.0
5 description: STM32 UART-BASE
8   - name: uart-controller.yaml
9     property-blocklist:
10       - clock-frequency
11   - name: pinctrl-device.yaml
12   - name: reset-device.yaml
13   - name: uart-controller-pin-inversion.yaml
28   single-wire:
31       Enable the single wire half-duplex communication.
36   tx-rx-swap:
41   pinctrl-0:
44   pinctrl-names:
47   wakeup-line:
54       Valid range: 0 - 31
56   de-enable:
59       Enable activating an external transeiver through the DE pin which must also be configured
62   de-assert-time:
66       Defines the time between the activation of the DE signal and the beginning of the start bit.
67       It is expressed in 16th of a bit time.
68       Valid range: 0 - 31
70   de-deassert-time:
74       Defines the time between the activation of the DE signal and the beginning of the start bit.
75       It is expressed in 16th of a bit time.
76       Valid range: 0 - 31
78   de-invert:
81       Invert the binary logic of the de pin. When enabled, physical logic levels are inverted and
84   fifo-enable:
90       allows more reliable communication with UART devices sensitive to variation of inter-frames