Lines Matching +full:power +full:- +full:down
2 # SPDX-License-Identifier: Apache-2.0
5 When setting the odr and power-mode properties in a .dts or .dtsi file you may include
9 #include <zephyr/dt-bindings/sensor/lis2ds12.h>
14 power-mode = <LIS2DS12_DT_LOW_POWER>;
18 include: sensor-device.yaml
21 irq-gpios:
22 type: phandle-array
34 Range in g. Default is power-up configuration.
36 - 16 # 16g (0.488 mg/LSB)
37 - 8 # 8g (0.244 mg/LSB)
38 - 4 # 4g (0.122 mg/LSB)
39 - 2 # 2g (0.061 mg/LSB)
43 power-mode:
47 Specify the sensor power mode. Default is power-down mode
49 - 0 # LIS2DS12_DT_POWER_DOWN
50 - 1 # LIS2DS12_DT_LOW_POWER
51 - 2 # LIS2DS12_DT_HIGH_RESOLUTION
52 - 3 # LIS2DS12_DT_HIGH_FREQUENCY
61 Default is power-down mode
63 - 0 # LIS2DS12_DT_ODR_OFF
64 - 1 # LIS2DS12_DT_ODR_1Hz_LP
65 - 2 # LIS2DS12_DT_ODR_12Hz5
66 - 3 # LIS2DS12_DT_ODR_25Hz
67 - 4 # LIS2DS12_DT_ODR_50Hz
68 - 5 # LIS2DS12_DT_ODR_100Hz
69 - 6 # LIS2DS12_DT_ODR_200Hz
70 - 7 # LIS2DS12_DT_ODR_400Hz
71 - 8 # LIS2DS12_DT_ODR_800Hz
72 - 9 # LIS2DS12_DT_ODR_1600Hz
73 - 10 # LIS2DS12_DT_ODR_3200Hz_HF
74 - 11 # LIS2DS12_DT_ODR_6400Hz_HF