Lines Matching +full:ouptut +full:- +full:low

2 # SPDX-License-Identifier: Apache-2.0
6     Based on pincfg-node.yaml binding.
8     Note: `bias-disable` and `drive-push-pull` are default pin configurations.
9            They will be applied in case no `bias-foo` or `driver-bar` properties
12 compatible: "st,stm32-pinctrl"
20   remap-pa11:
25   remap-pa12:
30   remap-pa11-pa12:
35 child-binding:
40     - name: pincfg-node.yaml
41       property-allowlist:
42         - bias-disable
43         - bias-pull-down
44         - bias-pull-up
45         - drive-push-pull
46         - drive-open-drain
47         - output-low
48         - output-high
56 …thub.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
60         - port: The gpio port index (PA = 0, PB = 1, ..., PK = 11)
61         - line: The line offset within the port (PA0 = 0, PA1 = 1, ..., PA15 = 15)
62         - function: The function number, can be:
72         can be configured by adding 'ouptut-low' or 'output-high' properties
77           -include/zephyr/dt-bindings/pinctrl/stm32-pinctrl-common.h
90                  output-high;
93     slew-rate:
95       default: "low-speed"
97         - "low-speed"           # Default value.
98         - "medium-speed"
99         - "high-speed"
100         - "very-high-speed"
102         Pin speed. Default to low-speed. For few pins (PA11 and
104         (very-high-speed). Carefully check reference manual for these pins.