Lines Matching +full:pull +full:- +full:down

2 # SPDX-License-Identifier: Apache-2.0
10     - bias-pull-down: Enable pull-down resistor.
11     - bias-pull-up: Enable pull-up resistor.
12     - drive-open-drain: Output driver is open-drain.
15     - pinmux-locked: Lock pinmux configuration for peripheral device
16     - pinmux-gpio: Inverse pinmux back to gpio
17     - psl-in-mode: Select the assertion detection mode of PSL input
18     - psl-in-pol: Select the assertion detection polarity of PSL input
23     #include <nuvoton/npcx/npcx7/npcx7-pinctrl.dtsi>
26   internal 3.3V pull-up if its i2c frequency won't exceed 400kHz.
32       bias-pull-up; /* Enable internal pull-up for i2c0_0 */
33       pinmux-locked; /* Lock pinmuxing */
37       pinctrl-0 = <&i2c0_0_sda_scl_gpb4_b5>;
38       pinctrl-names = "default";
41 compatible: "nuvoton,npcx-pinctrl"
45 child-binding:
50     - name: pincfg-node.yaml
51       property-allowlist:
52         - bias-pull-down
53         - bias-pull-up
54         - drive-open-drain
60     dev-ctl:
62       description: Configurations of device control such as tri-state, io type and so on.
63     periph-pupd:
66         A map to PUPD_ENn register/bit that enable pull-up/down of NPCX peripheral devices.
67         Please don't overwrite this property in the board-level DT driver.
68     psl-offset:
72         Please don't overwrite this property in the board-level DT driver.
73     psl-polarity:
77         Please don't overwrite this property in the board-level DT driver.
78     pinmux-locked:
81     pinmux-gpio:
84     psl-in-mode:
88         - "level": Select the detection mode to level detection
89         - "edge": Select the detection mode to edge detection
91         - "level"
92         - "edge"
93     psl-in-pol:
97         - "low-falling": Select the detection polarity to low/falling
98         - "high-rising": Select the detection polarity to high/rising
100         - "low-falling"
101         - "high-rising"