Lines Matching full:bias
22 'bias-pull-up' property. Here is a list of the supported standard pin
24 * bias-high-impedance
25 * bias-pull-up
26 * bias-pull-down
63 NOTE2 Pre-defined pin control nodes do not have bias pin configuration.
64 The bias configuration can be updated in board-pinctrl.dtsi
66 /* Configure pin control Bias mode for uart2 pins */
91 /* Configure pin control bias mode for uart5 pins */
109 - bias-high-impedance
110 - bias-pull-down
111 - bias-pull-up