Lines Matching +full:pull +full:- +full:up +full:- +full:ohms

2 # SPDX-License-Identifier: Apache-2.0
19       /* You can put this in places like a board-pinctrl.dtsi file in
23       /* include pre-defined combinations for the SoC variant used by the board */
24       #include <dt-bindings/pinctrl/ambiq-apollo4-pinctrl.h>
33             input-enable;
47     pins, such as the 'input-enable' property in group 2.
49 compatible: "ambiq,apollo4-pinctrl"
53 child-binding:
56   child-binding:
59       - name: pincfg-node.yaml
60         property-allowlist:
61           - input-enable
62           - drive-push-pull
63           - drive-open-drain
64           - bias-high-impedance
65           - bias-pull-up
66           - bias-pull-down
76       drive-strength:
79           - "0.1"
80           - "0.5"
81           - "0.75"
82           - "1.0"
85           The drive strength of a pin, relative to full-driver strength.
87       slew-rate:
90           - "slow"
91           - "fast"
95       ambiq,pull-up-ohms:
98           - 1500
99           - 6000
100           - 12000
101           - 24000
102           - 50000
103           - 100000
106           The pullup resistor value. The default value is 1500 ohms.
107       ambiq,iom-nce-module:
111           IOM nCE module select, selects the SPI channel (CE) number (0-42).
157       ambiq,iom-mspi:
164       ambiq,iom-num:
169           IOM number (0-7) or MSPI (0-2).
172       ambiq,interrupt-direction: