Lines Matching +full:bias +full:- +full:high +full:- +full:impedance

2 # SPDX-License-Identifier: Apache-2.0
19   /* You can put this in places like a board-pinctrl.dtsi file in
23   /* include pre-defined combinations for the SoC variant used by the board */
24   #include <dt-bindings/pinctrl/ambiq-apollo3-pinctrl.h>
33         input-enable;
47   pins, such as the 'input-enable' property in group 2.
49 compatible: "ambiq,apollo3-pinctrl"
53 child-binding:
56   child-binding:
59       - name: pincfg-node.yaml
60         property-allowlist:
61           - input-enable
62           - drive-push-pull
63           - drive-open-drain
64           - bias-high-impedance
65           - bias-pull-up
66           - bias-pull-down
76       drive-strength:
79           - "0.1"
80           - "0.5"
81           - "0.75"
82           - "1.0"
85           The drive strength of a pin, relative to full-driver strength.
88       ambiq,pull-up-ohms:
91           - 1500
92           - 6000
93           - 12000
94           - 24000
97           The 1.5K-24K pullup values are valid for select I2C enabled pads.
98           For Apollo3 these pins are 0-1,5-6,8-9,25,27,39-40,42-43,48-49.
101       ambiq,iom-nce-module:
105           IOM nCE module select, selects the SPI channel (CE) number (0-3).
109       ambiq,iom-mspi:
118       ambiq,iom-num:
123           IOM number (0-5) or MSPI (0-2).