Lines Matching full:used
59 periph/mem datasize are used. The periph/mem datasize must be equal,
61 - There is no Fifo used by this DMA peripheral.
68 DMA channel name. If DMA should be used, expected value is "tx_rx".
94 Specifies which port of the OCTOSPI IO Manager is used for the IO[3:0] pins.
96 If absent, then `IOPORT_<n>_LOW` is used where `n` is the OSPI
112 Specifies which port of the OCTOSPI IO Manager is used for the IO[7:4] pins.
114 If absent, then `IOPORT_<n>_HIGH` is used where `n` is the OSPI
129 Specifies which port of the OCTOSPI IO Manager is used for the clk pin.
131 If absent, then n is used where `n` is the OSPI
144 Specifies which port of the OCTOSPI IO Manager is used for the dqs pin.
146 If absent, then n is used where `n` is the OSPI
159 Specifies which port of the OCTOSPI IO Manager is used for the ncs pin.
161 If absent, then n is used where `n` is the OSPI