Lines Matching full:pulse

28       atmel,smc-pulse-timing = <6 6 6 6>;
39   setup, pulse and hold. The setup is used to address the memory. The pulse
47     cycle-timing (7) = setup (1) + pulse (6) + hold (0)
50     cycle-timing (10) = setup (1) + pulse (6) + hold (3)
99         on the bus during the pulse and hold steps of that signal.
112         from the bus during the pulse and hold steps of that signal.
129     atmel,smc-pulse-timing:
133         This value is used to effectivelly read/write at memory region (pulse phase).
134         The pulse value is an array of the signals NWE, NCS_WR, NRD and NCS_RD where
146         is defined as: cycle = setup + pulse + hold
147         Value has to be greater or equal to setup + pulse timing and