Lines Matching +full:ahb +full:- +full:cacheable
4 * SPDX-License-Identifier: Apache-2.0
10 flexram,num-ram-banks = <4>;
14 clock-frequency = <500000000>;
30 /delete-node/ arm-podf;
32 ipg-podf {
33 clock-div = <4>;
56 irq-shared-offset = <0>;
57 dma-channels = <16>;
62 /* Remove GPIO3-GPIO9, they don't exist on RT1010 */
63 /delete-node/ gpio@401c0000;
64 /delete-node/ gpio@401c4000;
65 /delete-node/ gpio@42000000;
66 /delete-node/ gpio@42004000;
67 /delete-node/ gpio@42008000;
68 /delete-node/ gpio@4200c000;
71 /delete-node/ gpio@401bc000;
74 compatible = "nxp,imx-gpio";
77 gpio-controller;
78 #gpio-cells = <2>;
96 /delete-node/ qtmr@401dc000;
97 /delete-node/ qtmr@401e0000;
98 /delete-node/ qtmr@401e4000;
99 /delete-node/ qtmr@401e8000;
102 /delete-node/ spi@402a8000;
104 compatible = "nxp,imx-flexspi";
107 #address-cells = <1>;
108 #size-cells = <0>;
109 ahb-bufferable;
110 ahb-cacheable;
116 /delete-node/ semc0@402f0000;
119 /delete-node/ i2c@403f0000;
120 /delete-node/ i2c@403f4000;
124 clock-frequency = <I2C_BITRATE_STANDARD>;
125 #address-cells = <1>;
126 #size-cells = <0>;
135 clock-frequency = <I2C_BITRATE_STANDARD>;
136 #address-cells = <1>;
137 #size-cells = <0>;
145 /delete-node/ i2c@403f8000;
146 /delete-node/ i2c@403fc000;
149 /delete-node/ display-controller@402b8000;
152 /delete-node/ spi@40394000;
153 /delete-node/ spi@40398000;
160 #address-cells = <1>;
161 #size-cells = <0>;
162 tx-fifo-size = <16>;
163 rx-fifo-size = <16>;
172 #address-cells = <1>;
173 #size-cells = <0>;
174 tx-fifo-size = <16>;
175 rx-fifo-size = <16>;
178 /* Remove LPUART5-8, they don't exist on RT1010 */
179 /delete-node/ uart@40194000;
180 /delete-node/ uart@40198000;
181 /delete-node/ uart@4019c000;
182 /delete-node/ uart@401a0000;
185 /delete-node/ adc@400C8000;
188 /delete-node/ spi@402a4000;
191 /delete-node/ flexpwm@403dc000;
198 compatible = "nxp,imx-pwm";
201 #pwm-cells = <3>;
208 compatible = "nxp,imx-pwm";
211 #pwm-cells = <3>;
218 compatible = "nxp,imx-pwm";
221 #pwm-cells = <3>;
228 compatible = "nxp,imx-pwm";
231 #pwm-cells = <3>;
237 /* Remove FlexPWM2-4, they don't exist on RT1010 */
238 /delete-node/ flexpwm@403e0000;
239 /delete-node/ flexpwm@403e4000;
240 /delete-node/ flexpwm@403e8000;
243 /delete-node/ enet@402d8000;
246 /delete-node/ usbd@402e0000;
251 interrupt-names = "usb_otg";
253 num-bidir-endpoints = <8>;
258 /delete-node/ usbd@402e0200;
261 /delete-node/ usdhc@402c0000;
262 /delete-node/ usdhc@402c4000;
265 /delete-node/ csi@402bc000;
268 /delete-node/ can@401d0000;
269 /delete-node/ can@401d4000;
270 /delete-node/ can@401d8000;
273 /delete-node/ wdog@400d0000;
276 /delete-node/ sai@40384000;
277 /delete-node/ sai@4038c000;
279 compatible = "nxp,mcux-i2s";
280 #address-cells = <1>;
281 #size-cells = <0>;
282 #pinmux-cells = <2>;
286 clock-mux = <2>;
291 pll-clocks = <&anatop 0x70 0xC000 0>,
296 pll-clock-names = "src", "lp", "pd", "num", "den";
298 * Based on this requirement, pre-div must be at least 3
299 * The pre-div and post-div are one less than the actual divide-by amount.
300 * A pre-div value of 0x1 results in a pre-divider of
303 pre-div = <0x3>;
308 dma-names = "rx", "tx";
312 nxp,tx-channel = <1>;
313 nxp,tx-dma-channel = <0>;
314 nxp,rx-dma-channel = <1>;
319 compatible = "nxp,mcux-i2s";
320 #address-cells = <1>;
321 #size-cells = <0>;
322 #pinmux-cells = <2>;
326 clock-mux = <2>;
327 pre-div = <0>;
329 pll-clocks = <&anatop 0x70 0xC000 0>,
334 pll-clock-names = "src", "lp", "pd", "num", "den";
338 dma-names = "rx", "tx";
339 nxp,tx-channel = <0>;
340 nxp,tx-dma-channel = <5>;
341 nxp,rx-dma-channel = <6>;
346 /delete-node/ sai@40388000;
351 /delete-node/ &lpspi3;
352 /delete-node/ &lpspi4;