26 	usb_hw_t *base;  member
86 	usb_hw_t *base = config->base;  in sie_status_clr()  local
88 	rpi_pico_bit_clr((mm_reg_t)&base->sie_status, bit);  in sie_status_clr()
167 	usb_hw_t *base = config->base;  in rpi_pico_ep_cancel()  local
168 	mm_reg_t abort_done_reg = (mm_reg_t)&base->abort_done;  in rpi_pico_ep_cancel()
169 	mm_reg_t abort_reg = (mm_reg_t)&base->abort;  in rpi_pico_ep_cancel()
565 	usb_hw_t *base = config->base;  in rpi_pico_handle_buff_status()  local
569 	buf_status = sys_read32((mm_reg_t)&base->buf_status);  in rpi_pico_handle_buff_status()
585 		rpi_pico_bit_clr((mm_reg_t)&base->buf_status, BIT(i));  in rpi_pico_handle_buff_status()
594 	usb_hw_t *base = config->base;  in rpi_pico_isr_handler()  local
595 	uint32_t status = base->ints;  in rpi_pico_isr_handler()
600 		sys_read32((mm_reg_t)&base->sof_rd);  in rpi_pico_isr_handler()
609 		sie_status = sys_read32((mm_reg_t)&base->sie_status);  in rpi_pico_isr_handler()
648 		sys_write32(0, (mm_reg_t)&base->dev_addr_ctrl);  in rpi_pico_isr_handler()
818 	usb_hw_t *base = config->base;  in udc_rpi_pico_ep_set_halt()  local
824 		rpi_pico_bit_set((mm_reg_t)&base->ep_stall_arm, bit);  in udc_rpi_pico_ep_set_halt()
874 	usb_hw_t *base = config->base;  in udc_rpi_pico_set_address()  local
876 	sys_write32(addr, (mm_reg_t)&base->dev_addr_ctrl);  in udc_rpi_pico_set_address()
886 	usb_hw_t *base = config->base;  in udc_rpi_pico_host_wakeup()  local
888 	rpi_pico_bit_set((mm_reg_t)&base->sie_ctrl, USB_SIE_CTRL_RESUME_BITS);  in udc_rpi_pico_host_wakeup()
900 	usb_hw_t *base = config->base;  in udc_rpi_pico_enable()  local
907 	memset(base, 0, sizeof(usb_hw_t));  in udc_rpi_pico_enable()
912 		    (mm_reg_t)&base->muxing);  in udc_rpi_pico_enable()
916 		    (mm_reg_t)&base->pwr);  in udc_rpi_pico_enable()
919 	sys_write32(USB_SIE_CTRL_EP0_INT_1BUF_BITS, (mm_reg_t)&base->sie_ctrl);  in udc_rpi_pico_enable()
935 		    (mm_reg_t)&base->inte);  in udc_rpi_pico_enable()
938 	rpi_pico_bit_set((mm_reg_t)&base->sie_ctrl, USB_SIE_CTRL_PULLUP_EN_BITS);  in udc_rpi_pico_enable()
941 	sys_write32(USB_MAIN_CTRL_CONTROLLER_EN_BITS, (mm_reg_t)&base->main_ctrl);  in udc_rpi_pico_enable()
945 	LOG_DBG("Enable device %s %p", dev->name, (void *)base);  in udc_rpi_pico_enable()
1131 		.base = (usb_hw_t *)DT_INST_REG_ADDR(n),				\