Lines Matching refs:J
5 Nordic nRF5x Segger J-Link
14 * Segger J-Link firmware and desktop tools
21 Segger J-Link Software Installation
24 To install the J-Link Software and documentation pack, follow the steps below:
26 #. Download the appropriate package from the `J-Link Software and documentation pack`_ website
28 #. When connecting a J-Link-enabled board such as an nRF5x DK, PDK or dongle, a
49 to install the Segger J-Link Software and the nRF5x Command-Line Tools, follow the steps below:
80 **Important note**: An issue with Segger J-Link firmware on the nRF5x boards might cause
133 Due to a known issue in Segger's J-Link firmware, depending on your operating system
156 Segger's J-Link supports `Real-Time Tracing (RTT)`_, a technology that allows a terminal
171 supports SEGGER J-Link RTT. This symbol is set automatically by the SoC
191 * Open the "J-Link RTT Viewer" application
220 Segger J-Link is compatible with `Segger Ozone`_, a visual debugger that can be obtained here:
241 .. _Segger SAM3U Wiki: https://wiki.segger.com/index.php?title=J-Link-OB_SAM3U