Lines Matching refs:IP
34 The ``net-tools`` project provides a configure file to setup IP-to-IP tunnel
67 [20210408Z14:33:08.959589] Ether / IP / ICMP 192.0.2.1 > 192.0.2.2 echo-request 0 / Raw
68 [20210408Z14:33:08.976178] Ether / IP / ICMP 192.0.2.2 > 192.0.2.1 echo-reply 0 / Raw
101 The IP address above is the inner tunnel endpoint, and can be changed and
103 containing the captured network packets to the configured IP tunnel, so we
144 <remote> is the (outer) endpoint IP address
145 <local> is the (inner) local IP address
146 <peer> is the (inner) peer IP address
147 Local and Peer IP addresses can have UDP port number in them (optional)
159 The ``2001:db8:200::1`` tells the local IP address for the tunnel,
160 the ``2001:db8:200::2`` is the peer IP address where the captured network
205 ``net capture setup`` so that the IP tunnel is attached to desired network