Lines Matching refs:probe
5 A debug probe is used for both flashing and debugging the board. This board has
6 an :ref:`lpc-link2-onboard-debug-probe`. The default firmware present on this
7 probe is the :ref:`lpclink2-daplink-onboard-debug-probe`.
10 to setup your debug probe:
23 :ref:`lpclink2-cmsis-onboard-debug-probe` to reprogram the default debug
24 probe firmware on this board.
31 J-Link firmware, or a :ref:`jlink-external-debug-probe` can be attached to the
40 :ref:`lpclink2-jlink-onboard-debug-probe` to reprogram the default debug
41 probe firmware on this board.
44 To attach an external J-Link probe, ensure the SWD isolation jumpers are
45 removed, then connect the probe to the external JTAG/SWD header