Lines Matching refs:debug
5 A debug probe is used for both flashing and debugging the board. This board has
6 an :ref:`lpc-link2-onboard-debug-probe`. The default firmware present on this
7 probe is the :ref:`lpclink2-daplink-onboard-debug-probe`.
10 to setup your debug probe:
12 * :ref:`jlink-debug-host-tools`:
14 * :ref:`linkserver-debug-host-tools`:
16 * :ref:`pyocd-debug-host-tools`:
23 :ref:`lpclink2-cmsis-onboard-debug-probe` to reprogram the default debug
30 There are two options: the onboard debug circuit can be updated with Segger
31 J-Link firmware, or a :ref:`jlink-external-debug-probe` can be attached to the
34 To update the onboard debug circuit, please do the following:
37 debug USB, as the J-Link firmware does not power the EVK via the
38 debug USB.
40 :ref:`lpclink2-jlink-onboard-debug-probe` to reprogram the default debug