Lines Matching refs:probe

5 A debug probe is used for both flashing and debugging the board. This board has
6 an :ref:`opensda-onboard-debug-probe`. The default firmware present on this
7 probe is the :ref:`opensda-daplink-onboard-debug-probe`.
10 to setup your debug probe:
20    :ref:`opensda-daplink-onboard-debug-probe` to reprogram the default debug
21    probe firmware on this board.
28 J-Link firmware, or a :ref:`jlink-external-debug-probe` can be attached to the
34    :ref:`opensda-jlink-onboard-debug-probe` to reprogram the default debug
35    probe firmware on this board.
38 To attach an external J-Link probe, ensure the SWD isolation jumpers are
39 removed, and connect the external probe to the JTAG/SWD header.