Lines Matching full:you
10 Black allowing you to stack your favorite BeagleBone cape on top to expand it’s capability.
34 In order to upload the application to the device, you'll need OpenOCD and GDB
36 You can get them as a part of SoftConsole SDK.
41 You will also require a Debugger such as Microchip's FlashPro5/6.
44 Now you can run ``tio <port>`` in a terminal window to access the UART debug port connection. Once …
45 are connected properly you can press the Reset button which will show you a progress bar like:
51 Once you see that progress bar on your screen you can start pressing any button (0-9/a-z) which
54 With the necessary tools installed, you can connect to the board using OpenOCD.
64 the board. You can use the RISC-V GDB from the Zephyr SDK.
88 …ps://github.com/polarfire-soc/hart-software-services>`_ along with Zephyr, you need to use the `hs…
106 After generating the image, you can flash it to the board by restarting a board that's connected ov…
126 This will cause the board to appear as a USB mass storage device. You can then then flash the image…