Lines Matching refs:B1
3 ARM V2M Musca B1
10 on the V2M Musca B1 board. It provides support for the Musca B1 ARM Cortex-M33
20 :alt: ARM V2M Musca B1
22 More information about the board can be found at the `V2M Musca B1 Website`_.
27 ARM V2M MUSCA B1 provides the following hardware components:
97 See the `V2M Musca B1 Website`_ for a complete list of V2M Musca board hardware
106 Musca B1 is a Cortex-M33 based SoC and has 15 fixed exceptions and 77 IRQs.
167 The ARM V2M Musca B1 Board has 4 GPIO controllers. These controllers are
174 Mapping from the ARM V2M Musca B1 Board pins to GPIO controllers:
208 For more details please refer to `Musca B1 Technical Reference Manual (TRM)`_.
214 Musca B1 has a built-in RGB LED connected to GPIO[4:2] pins.
225 V2M Musca B1 has a 32.768kHz crystal clock. The clock goes to a PLL and is
234 The ARM Musca B1 processor has two UARTs. Both the UARTs have only two wires
252 The ARM Musca B1 test chip implements a Serial Configuration Control (SCC)
258 Normal Musca-B1 test chip boot operation is from 4MB eFlash by default, and
260 Musca-B1 test chip also support to boot from 8MB QSPI. You can update the
266 Musca B1 supports the v8m security extension, and by default boots to the
288 V2M Musca B1 provides:
351 Uploading an application to V2M Musca B1
355 V2M Musca B1. An optional bootloader can be prepended to the image.
371 Connect the V2M Musca B1 to your host computer using the USB port. You should
383 .. _V2M Musca B1 Website: argument
384 https://developer.arm.com/Tools%20and%20Software/Musca-B1%20Test%20Chip%20Board
386 .. _Musca B1 Technical Reference Manual (TRM): argument