1 /* This test is designed to test the ux_device_stack_interface_start. */
2
3 #include <stdio.h>
4 #include "tx_api.h"
5 #include "ux_api.h"
6 #include "ux_system.h"
7 #include "ux_utility.h"
8
9 #include "ux_host_stack.h"
10 #include "ux_device_stack.h"
11
12 #include "ux_device_class_cdc_acm.h"
13 #include "ux_host_class_cdc_acm.h"
14
15 #include "ux_host_class_dpump.h"
16 #include "ux_device_class_dpump.h"
17
18 #include "ux_host_class_hid.h"
19 #include "ux_device_class_hid.h"
20
21 #include "ux_host_class_storage.h"
22 #include "ux_device_class_storage.h"
23
24 #include "ux_test_dcd_sim_slave.h"
25 #include "ux_test_hcd_sim_host.h"
26 #include "ux_test_utility_sim.h"
27
28
29 /* Define USBX test constants. */
30
31 #define UX_TEST_STACK_SIZE 4096
32 #define UX_TEST_BUFFER_SIZE 2048
33 #define UX_TEST_RUN 1
34 #define UX_TEST_MEMORY_SIZE (64*1024)
35
36 /* HID mouse related descriptors */
37
38 static UCHAR hid_mouse_report[] = {
39
40 0x05, 0x01, // USAGE_PAGE (Generic Desktop)
41 0x09, 0x02, // USAGE (Mouse)
42 0xa1, 0x01, // COLLECTION (Application)
43 0x09, 0x01, // USAGE (Pointer)
44 0xa1, 0x00, // COLLECTION (Physical)
45 0x05, 0x09, // USAGE_PAGE (Button)
46 0x19, 0x01, // USAGE_MINIMUM (Button 1)
47 0x29, 0x03, // USAGE_MAXIMUM (Button 3)
48 0x15, 0x00, // LOGICAL_MINIMUM (0)
49 0x25, 0x01, // LOGICAL_MAXIMUM (1)
50 0x95, 0x03, // REPORT_COUNT (3)
51 0x75, 0x01, // REPORT_SIZE (1)
52 0x81, 0x02, // INPUT (Data,Var,Abs)
53 0x95, 0x01, // REPORT_COUNT (1)
54 0x75, 0x05, // REPORT_SIZE (5)
55 0x81, 0x03, // INPUT (Cnst,Var,Abs)
56 0x05, 0x01, // USAGE_PAGE (Generic Desktop)
57 0x09, 0x30, // USAGE (X)
58 0x09, 0x31, // USAGE (Y)
59 0x15, 0x81, // LOGICAL_MINIMUM (-127)
60 0x25, 0x7f, // LOGICAL_MAXIMUM (127)
61 0x75, 0x08, // REPORT_SIZE (8)
62 0x95, 0x02, // REPORT_COUNT (2)
63 0x81, 0x06, // INPUT (Data,Var,Rel)
64 0x09, 0x38, // USAGE (Mouse Wheel)
65 0x15, 0x81, // LOGICAL_MINIMUM (-127)
66 0x25, 0x7f, // LOGICAL_MAXIMUM (127)
67 0x75, 0x08, // REPORT_SIZE (8)
68 0x95, 0x01, // REPORT_COUNT (1)
69 0x81, 0x06, // INPUT (Data,Var,Rel)
70 0xc0, // END_COLLECTION
71 0xc0 // END_COLLECTION
72 };
73 #define HID_MOUSE_REPORT_LENGTH (sizeof(hid_mouse_report)/sizeof(hid_mouse_report[0]))
74
75 #define LSB(x) (x & 0x00ff)
76 #define MSB(x) ((x & 0xff00) >> 8)
77
78 /* Configuration descriptor 9 bytes */
79 #define CFG_DESC(wTotalLength, bNumInterfaces, bConfigurationValue)\
80 /* Configuration 1 descriptor 9 bytes */\
81 0x09, 0x02, LSB(wTotalLength), MSB(wTotalLength),\
82 (bNumInterfaces), (bConfigurationValue), 0x00,\
83 0x40, 0x00,
84 #define CFG_DESC_LEN 9
85
86 /* DPUMP interface descriptors 9+7+7+7+7=37 bytes. */
87 #define DPUMP_IFC_DESC_ALL(ifc, bulk_in_epa, bulk_out_epa, int_in_epa, int_out_epa) \
88 /* Interface descriptor */\
89 0x09, 0x04, (ifc), 0x00, 0x04, 0x99, 0x99, 0x99, 0x00,\
90 /* Endpoint descriptor (Bulk Out) */\
91 0x07, 0x05, (bulk_out_epa), 0x02, 0x40, 0x00, 0x00,\
92 /* Endpoint descriptor (Bulk In) */\
93 0x07, 0x05, (bulk_in_epa), 0x02, 0x40, 0x00, 0x00,\
94 /* Endpoint descriptor (Interrupt Out) */\
95 0x07, 0x05, (int_out_epa), 0x02, 0x40, 0x00, 0x00,\
96 /* Endpoint descriptor (Interrupt In) */\
97 0x07, 0x05, (int_in_epa), 0x02, 0x40, 0x00, 0x00,
98 #define DPUMP_IFC_DESC_ALL_LEN 37
99
100 /* HID Mouse interface descriptors 9+9=18 bytes */
101 #define HID_MOUSE_IFC0_DESC_ALL(ifc) \
102 /* Interface descriptor */\
103 0x09, 0x04, (ifc), 0x00, 0x00, 0x03, 0x00, 0x00, 0x00,\
104 /* HID descriptor */\
105 0x09, 0x21, 0x10, 0x01, 0x21, 0x01, 0x22, LSB(HID_MOUSE_REPORT_LENGTH),\
106 MSB(HID_MOUSE_REPORT_LENGTH),
107 #define HID_MOUSE_IFC0_DESC_ALL_LEN 18
108
109 /* HID Mouse interface descriptors 9+9+7=25 bytes */
110 #define HID_MOUSE_IFC1_DESC_ALL(ifc, interrupt_epa) \
111 /* Interface descriptor */\
112 0x09, 0x04, (ifc), 0x01, 0x01, 0x03, 0x00, 0x00, 0x00,\
113 /* HID descriptor */\
114 0x09, 0x21, 0x10, 0x01, 0x21, 0x01, 0x22, LSB(HID_MOUSE_REPORT_LENGTH),\
115 MSB(HID_MOUSE_REPORT_LENGTH),\
116 /* Endpoint descriptor (Interrupt) */\
117 0x07, 0x05, (interrupt_epa), 0x03, 0x08, 0x00, 0x08,
118 #define HID_MOUSE_IFC1_DESC_ALL_LEN 25
119
120 /* Define the counters used in the test application... */
121
122 static ULONG thread_0_counter;
123 static ULONG thread_1_counter;
124 static ULONG error_counter;
125
126 static UCHAR expect_errors = UX_FALSE;
127
128
129 /* Define USBX test global variables. */
130
131 static UX_HOST_CLASS *class_driver;
132 static UX_HOST_CLASS_DPUMP *dpump;
133 static UX_SLAVE_CLASS_DPUMP *dpump_slave = UX_NULL;
134
135
136 static UCHAR device_framework_full_speed[] = {
137
138 /* Device descriptor 18 bytes */
139 0x12, 0x01, 0x10, 0x01, 0x00, 0x00, 0x00, 0x08,
140 0xec, 0x08, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,
141 0x00, 0x01,
142
143 /* Configuration descriptor 9 bytes */
144 CFG_DESC(CFG_DESC_LEN + DPUMP_IFC_DESC_ALL_LEN + HID_MOUSE_IFC0_DESC_ALL_LEN + HID_MOUSE_IFC1_DESC_ALL_LEN, 2, 1)
145 /* DPUMP 9+7+7+7+7 =37 */
146 DPUMP_IFC_DESC_ALL(0, 0x81, 0x02, 0x83, 0x04)
147 /* HID 9+9 + 9+9+7=43 */
148 HID_MOUSE_IFC0_DESC_ALL(1)
149 HID_MOUSE_IFC1_DESC_ALL(1, 0x85)
150 };
151 #define DEVICE_FRAMEWORK_LENGTH_FULL_SPEED sizeof(device_framework_full_speed)
152
153 static UCHAR device_framework_high_speed[] = {
154
155 /* Device descriptor */
156 0x12, 0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x40,
157 0x0a, 0x07, 0x25, 0x40, 0x01, 0x00, 0x01, 0x02,
158 0x03, 0x01,
159
160 /* Device qualifier descriptor */
161 0x0a, 0x06, 0x00, 0x02, 0x00, 0x00, 0x00, 0x40,
162 0x01, 0x00,
163
164 /* Configuration descriptor */
165 CFG_DESC(CFG_DESC_LEN + DPUMP_IFC_DESC_ALL_LEN + HID_MOUSE_IFC0_DESC_ALL_LEN + HID_MOUSE_IFC1_DESC_ALL_LEN, 2, 1)
166 /* DPUMP 9+7+7+7+7 =37 */
167 DPUMP_IFC_DESC_ALL(0, 0x81, 0x02, 0x83, 0x04)
168 /* HID 9+9 + 9+9+7=43 */
169 HID_MOUSE_IFC0_DESC_ALL(1)
170 HID_MOUSE_IFC1_DESC_ALL(1, 0x85)
171 };
172 #define DEVICE_FRAMEWORK_LENGTH_HIGH_SPEED sizeof(device_framework_high_speed)
173
174 /* String Device Framework :
175 Byte 0 and 1 : Word containing the language ID : 0x0904 for US
176 Byte 2 : Byte containing the index of the descriptor
177 Byte 3 : Byte containing the length of the descriptor string
178 */
179
180 static UCHAR string_framework[] = {
181
182 /* Manufacturer string descriptor : Index 1 */
183 0x09, 0x04, 0x01, 0x0c,
184 0x45, 0x78, 0x70, 0x72,0x65, 0x73, 0x20, 0x4c,
185 0x6f, 0x67, 0x69, 0x63,
186
187 /* Product string descriptor : Index 2 */
188 0x09, 0x04, 0x02, 0x0c,
189 0x44, 0x61, 0x74, 0x61, 0x50, 0x75, 0x6d, 0x70,
190 0x44, 0x65, 0x6d, 0x6f,
191
192 /* Serial Number string descriptor : Index 3 */
193 0x09, 0x04, 0x03, 0x04,
194 0x30, 0x30, 0x30, 0x31
195 };
196 #define STRING_FRAMEWORK_LENGTH sizeof(string_framework)
197
198 /* Multiple languages are supported on the device, to add
199 a language besides English, the unicode language code must
200 be appended to the language_id_framework array and the length
201 adjusted accordingly. */
202 static UCHAR language_id_framework[] = {
203
204 /* English. */
205 0x09, 0x04
206 };
207 #define LANGUAGE_ID_FRAMEWORK_LENGTH sizeof(language_id_framework)
208
209 /* Simulation actions. */
210
211 static UX_TEST_SIM_ENTRY_ACTION dcd_endpoint_create_fail[] = {
212 /* function, request to match,
213 port action, port status,
214 request action, request EP, request data, request actual length, request status,
215 status, additional callback,
216 no_return */
217 { UX_DCD_CREATE_ENDPOINT, NULL,
218 UX_FALSE, 0,
219 0 , 0, UX_NULL, 0, 0,
220 UX_SUCCESS , UX_NULL,
221 UX_TRUE},
222 { UX_DCD_CREATE_ENDPOINT, NULL,
223 UX_FALSE, 0,
224 0 , 0, UX_NULL, 0, 0,
225 UX_ERROR , UX_NULL},
226 { UX_DCD_CREATE_ENDPOINT, NULL,
227 UX_FALSE, 0,
228 0 , 0, UX_NULL, 0, 0,
229 UX_ERROR , UX_NULL},
230 { UX_DCD_CREATE_ENDPOINT, NULL,
231 UX_FALSE, 0,
232 0 , 0, UX_NULL, 0, 0,
233 UX_ERROR , UX_NULL},
234 { UX_DCD_CREATE_ENDPOINT, NULL,
235 UX_FALSE, 0,
236 0 , 0, UX_NULL, 0, 0,
237 UX_ERROR , UX_NULL},
238 { 0 }
239 };
240
241
242 /* Define prototypes for external Host Controller's (HCDs), classes and clients. */
243
244 static VOID ux_test_instance_activate(VOID *dpump_instance);
245 static VOID ux_test_instance_deactivate(VOID *dpump_instance);
246
247 UINT _ux_host_class_dpump_entry(UX_HOST_CLASS_COMMAND *command);
248 UINT ux_hcd_sim_initialize(UX_HCD *hcd);
249 UINT _ux_host_class_dpump_write(UX_HOST_CLASS_DPUMP *dpump, UCHAR * data_pointer,
250 ULONG requested_length, ULONG *actual_length);
251 UINT _ux_host_class_dpump_read (UX_HOST_CLASS_DPUMP *dpump, UCHAR *data_pointer,
252 ULONG requested_length, ULONG *actual_length);
253
254 static TX_THREAD ux_test_thread_simulation_0;
255 static TX_THREAD ux_test_thread_simulation_1;
256 static void ux_test_thread_simulation_0_entry(ULONG);
257 static void ux_test_thread_simulation_1_entry(ULONG);
258
259
260 /* Define the ISR dispatch. */
261
262 extern VOID (*test_isr_dispatch)(void);
263
264
265 /* Prototype for test control return. */
266
267 void test_control_return(UINT status);
268
269
270 /* Define the ISR dispatch routine. */
271
test_isr(void)272 static void test_isr(void)
273 {
274
275 /* For further expansion of interrupt-level testing. */
276 }
277
278
error_callback(UINT system_level,UINT system_context,UINT error_code)279 static VOID error_callback(UINT system_level, UINT system_context, UINT error_code)
280 {
281 if (!expect_errors)
282 {
283 if (error_code != UX_DEVICE_HANDLE_UNKNOWN)
284 {
285 /* Failed test. */
286 printf("Error on line %d, system_level: %d, system_context: %d, error code: %d\n", __LINE__, system_level, system_context, error_code);
287 test_control_return(1);
288 }
289 }
290 }
291
test_ux_device_class_hid_entry(UX_SLAVE_CLASS_COMMAND * command)292 static UINT test_ux_device_class_hid_entry(UX_SLAVE_CLASS_COMMAND *command)
293 {
294 switch(command->ux_slave_class_command_request)
295 {
296 case UX_SLAVE_CLASS_COMMAND_INITIALIZE:
297 case UX_SLAVE_CLASS_COMMAND_QUERY:
298 return UX_SUCCESS;
299
300 default:
301 return UX_NO_CLASS_MATCH;
302 }
303 }
304
305 /* Define what the initial system looks like. */
306
307 #ifdef CTEST
test_application_define(void * first_unused_memory)308 void test_application_define(void *first_unused_memory)
309 #else
310 void usbx_ux_device_stack_interface_start_test_application_define(void *first_unused_memory)
311 #endif
312 {
313
314 UINT status;
315 CHAR *stack_pointer;
316 CHAR *memory_pointer;
317 UX_SLAVE_CLASS_DPUMP_PARAMETER parameter;
318 UX_SLAVE_CLASS_HID_PARAMETER hid_parameter;
319
320
321 #if !(UX_TEST_MULTI_IFC_ON)
322 printf("Running ux_device_stack_interface_start Test........................ SKIP!");
323 test_control_return(0);
324 return;
325 #endif
326
327 /* Initialize the free memory pointer. */
328 stack_pointer = (CHAR *) first_unused_memory;
329 memory_pointer = stack_pointer + (UX_TEST_STACK_SIZE * 2);
330
331 /* Initialize USBX Memory. */
332 status = ux_system_initialize(memory_pointer, UX_TEST_MEMORY_SIZE, UX_NULL, 0);
333
334 /* Check for error. */
335 if (status != UX_SUCCESS)
336 {
337
338 printf("Running ux_device_stack_interface_start Test........................ ERROR #1\n");
339 test_control_return(1);
340 }
341
342 /* Register the error callback. */
343 _ux_utility_error_callback_register(error_callback);
344
345 /* The code below is required for installing the host portion of USBX. */
346 status = ux_host_stack_initialize(UX_NULL);
347
348 /* Check for error. */
349 if (status != UX_SUCCESS)
350 {
351
352 printf("Running ux_device_stack_interface_start Test........................ ERROR #2\n");
353 test_control_return(1);
354 }
355
356 /* Register all the host class drivers for this USBX implementation. */
357 status = ux_host_stack_class_register(_ux_system_host_class_dpump_name, ux_host_class_dpump_entry);
358
359 /* Check for error. */
360 if (status != UX_SUCCESS)
361 {
362
363 printf("Running ux_device_stack_interface_start Test........................ ERROR #3\n");
364 test_control_return(1);
365 }
366
367 /* The code below is required for installing the device portion of USBX */
368 status = ux_device_stack_initialize(device_framework_high_speed, DEVICE_FRAMEWORK_LENGTH_HIGH_SPEED,
369 device_framework_full_speed, DEVICE_FRAMEWORK_LENGTH_FULL_SPEED,
370 string_framework, STRING_FRAMEWORK_LENGTH,
371 language_id_framework, LANGUAGE_ID_FRAMEWORK_LENGTH, UX_NULL);
372
373 /* Check for error. */
374 if (status != UX_SUCCESS)
375 {
376
377 printf("Running ux_device_stack_interface_start Test........................ ERROR #5\n");
378 test_control_return(1);
379 }
380
381 /* Set the parameters for callback when insertion/extraction of a Data Pump device. */
382 parameter.ux_slave_class_dpump_instance_activate = ux_test_instance_activate;
383 parameter.ux_slave_class_dpump_instance_deactivate = ux_test_instance_deactivate;
384
385 /* Initialize the device dpump class. The class is connected with interface 0 */
386 status = ux_device_stack_class_register(_ux_system_slave_class_dpump_name, _ux_device_class_dpump_entry,
387 1, 0, ¶meter);
388
389 /* Initialize the hid class parameters. */
390 hid_parameter.ux_device_class_hid_parameter_report_address = hid_mouse_report;
391 hid_parameter.ux_device_class_hid_parameter_report_length = HID_MOUSE_REPORT_LENGTH;
392 hid_parameter.ux_device_class_hid_parameter_callback = UX_NULL;
393 hid_parameter.ux_slave_class_hid_instance_activate = UX_NULL;
394
395 status |= ux_device_stack_class_register(_ux_system_slave_class_hid_name, test_ux_device_class_hid_entry,
396 1, 1, ¶meter);
397 #if UX_MAX_SLAVE_CLASS_DRIVER > 1
398 /* Check for error. */
399 if (status != UX_SUCCESS)
400 {
401
402 printf("Running ux_device_stack_interface_start Test........................ ERROR #6\n");
403 test_control_return(1);
404 }
405 #endif
406 /* Initialize the simulated device controller. */
407 status = _ux_test_dcd_sim_slave_initialize();
408
409 /* Check for error. */
410 if (status != UX_SUCCESS)
411 {
412
413 printf("Running ux_device_stack_interface_start Test........................ ERROR #7\n");
414 test_control_return(1);
415 }
416
417 /* Register all the USB host controllers available in this system */
418 status = ux_host_stack_hcd_register(_ux_system_host_hcd_simulator_name, _ux_test_hcd_sim_host_initialize,0,0);
419
420 /* Check for error. */
421 if (status != UX_SUCCESS)
422 {
423
424 printf("Running ux_device_stack_interface_start Test........................ ERROR #4\n");
425 test_control_return(1);
426 }
427
428 /* Create the main host simulation thread. */
429 status = tx_thread_create(&ux_test_thread_simulation_0, "test host simulation", ux_test_thread_simulation_0_entry, 0,
430 stack_pointer, UX_TEST_STACK_SIZE,
431 20, 20, 1, TX_AUTO_START);
432
433 /* Check for error. */
434 if (status != TX_SUCCESS)
435 {
436
437 printf("Running ux_device_stack_interface_start Test........................ ERROR #8\n");
438 test_control_return(1);
439 }
440 }
441
442
ux_test_thread_simulation_0_entry(ULONG arg)443 static void ux_test_thread_simulation_0_entry(ULONG arg)
444 {
445
446 UX_SLAVE_DEVICE *device;
447
448 /* Inform user. */
449 printf("Running ux_device_stack_interface_start Test........................ ");
450
451 ux_test_dcd_sim_slave_connect(UX_HIGH_SPEED_DEVICE);
452 ux_test_hcd_sim_host_connect(UX_HIGH_SPEED_DEVICE);
453
454 /* Enumeration check. */
455 if (dpump_slave == UX_NULL)
456 {
457
458 printf("ERROR #%d: Enum fail\n", __LINE__);
459 test_control_return(1);
460 }
461
462 /* Slave device. */
463 device = &_ux_system_slave->ux_system_slave_device;
464
465 /* Expect errors so skip them in error handler. */
466 expect_errors = UX_TRUE;
467
468 /* Break on errors. */
469 expect_errors = UX_FALSE;
470
471 /* Sleep for a tick to make sure everything is complete. */
472 tx_thread_sleep(1);
473
474 /* Check for errors from other threads. */
475 if (error_counter)
476 {
477
478 /* Test error. */
479 printf("ERROR #14\n");
480 test_control_return(1);
481 }
482 else
483 {
484
485 /* Successful test. */
486 printf("SUCCESS!\n");
487 test_control_return(0);
488 }
489 }
490
ux_test_instance_activate(VOID * dpump_instance)491 static VOID ux_test_instance_activate(VOID *dpump_instance)
492 {
493
494 /* Save the DPUMP instance. */
495 dpump_slave = (UX_SLAVE_CLASS_DPUMP *) dpump_instance;
496 }
497
ux_test_instance_deactivate(VOID * dpump_instance)498 static VOID ux_test_instance_deactivate(VOID *dpump_instance)
499 {
500
501 /* Reset the DPUMP instance. */
502 dpump_slave = UX_NULL;
503 }
504
505
