1 /* SPDX-License-Identifier: GPL-2.0 */ 2 3 /* Copyright (c) 2018, The Linux Foundation. All rights reserved. 4 * Copyright (C) 2018-2022 Linaro Ltd. 5 */ 6 #ifndef _IPA_QMI_MSG_H_ 7 #define _IPA_QMI_MSG_H_ 8 9 /* === Only "ipa_qmi" and "ipa_qmi_msg.c" should include this file === */ 10 11 #include <linux/types.h> 12 #include <linux/soc/qcom/qmi.h> 13 14 /* Request/response/indication QMI message ids used for IPA. Receiving 15 * end issues a response for requests; indications require no response. 16 */ 17 #define IPA_QMI_INDICATION_REGISTER 0x20 /* modem -> AP request */ 18 #define IPA_QMI_INIT_DRIVER 0x21 /* AP -> modem request */ 19 #define IPA_QMI_INIT_COMPLETE 0x22 /* AP -> modem indication */ 20 #define IPA_QMI_DRIVER_INIT_COMPLETE 0x35 /* modem -> AP request */ 21 22 /* The maximum size required for message types. These sizes include 23 * the message data, along with type (1 byte) and length (2 byte) 24 * information for each field. The qmi_send_*() interfaces require 25 * the message size to be provided. 26 */ 27 #define IPA_QMI_INDICATION_REGISTER_REQ_SZ 20 /* -> server handle */ 28 #define IPA_QMI_INDICATION_REGISTER_RSP_SZ 7 /* <- server handle */ 29 #define IPA_QMI_INIT_DRIVER_REQ_SZ 162 /* client handle -> */ 30 #define IPA_QMI_INIT_DRIVER_RSP_SZ 25 /* client handle <- */ 31 #define IPA_QMI_INIT_COMPLETE_IND_SZ 7 /* <- server handle */ 32 #define IPA_QMI_DRIVER_INIT_COMPLETE_REQ_SZ 4 /* -> server handle */ 33 #define IPA_QMI_DRIVER_INIT_COMPLETE_RSP_SZ 7 /* <- server handle */ 34 35 /* Maximum size of messages we expect the AP to receive (max of above) */ 36 #define IPA_QMI_SERVER_MAX_RCV_SZ 8 37 #define IPA_QMI_CLIENT_MAX_RCV_SZ 25 38 39 /* Request message for the IPA_QMI_INDICATION_REGISTER request */ 40 struct ipa_indication_register_req { 41 u8 master_driver_init_complete_valid; 42 u8 master_driver_init_complete; 43 u8 data_usage_quota_reached_valid; 44 u8 data_usage_quota_reached; 45 u8 ipa_mhi_ready_ind_valid; 46 u8 ipa_mhi_ready_ind; 47 u8 endpoint_desc_ind_valid; 48 u8 endpoint_desc_ind; 49 u8 bw_change_ind_valid; 50 u8 bw_change_ind; 51 }; 52 53 /* The response to a IPA_QMI_INDICATION_REGISTER request consists only of 54 * a standard QMI response. 55 */ 56 struct ipa_indication_register_rsp { 57 struct qmi_response_type_v01 rsp; 58 }; 59 60 /* Request message for the IPA_QMI_DRIVER_INIT_COMPLETE request */ 61 struct ipa_driver_init_complete_req { 62 u8 status; 63 }; 64 65 /* The response to a IPA_QMI_DRIVER_INIT_COMPLETE request consists only 66 * of a standard QMI response. 67 */ 68 struct ipa_driver_init_complete_rsp { 69 struct qmi_response_type_v01 rsp; 70 }; 71 72 /* The message for the IPA_QMI_INIT_COMPLETE_IND indication consists 73 * only of a standard QMI response. 74 */ 75 struct ipa_init_complete_ind { 76 struct qmi_response_type_v01 status; 77 }; 78 79 /* The AP tells the modem its platform type. We assume Android. */ 80 enum ipa_platform_type { 81 IPA_QMI_PLATFORM_TYPE_INVALID = 0x0, /* Invalid */ 82 IPA_QMI_PLATFORM_TYPE_TN = 0x1, /* Data card */ 83 IPA_QMI_PLATFORM_TYPE_LE = 0x2, /* Data router */ 84 IPA_QMI_PLATFORM_TYPE_MSM_ANDROID = 0x3, /* Android MSM */ 85 IPA_QMI_PLATFORM_TYPE_MSM_WINDOWS = 0x4, /* Windows MSM */ 86 IPA_QMI_PLATFORM_TYPE_MSM_QNX_V01 = 0x5, /* QNX MSM */ 87 }; 88 89 /* This defines the start and end offset of a range of memory. The start 90 * value is a byte offset relative to the start of IPA shared memory. The 91 * end value is the last addressable unit *within* the range. Typically 92 * the end value is in units of bytes, however it can also be a maximum 93 * array index value. 94 */ 95 struct ipa_mem_bounds { 96 u32 start; 97 u32 end; 98 }; 99 100 /* This defines the location and size of an array. The start value 101 * is an offset relative to the start of IPA shared memory. The 102 * size of the array is implied by the number of entries (the entry 103 * size is assumed to be known). 104 */ 105 struct ipa_mem_array { 106 u32 start; 107 u32 count; 108 }; 109 110 /* This defines the location and size of a range of memory. The 111 * start is an offset relative to the start of IPA shared memory. 112 * This differs from the ipa_mem_bounds structure in that the size 113 * (in bytes) of the memory region is specified rather than the 114 * offset of its last byte. 115 */ 116 struct ipa_mem_range { 117 u32 start; 118 u32 size; 119 }; 120 121 /* The message for the IPA_QMI_INIT_DRIVER request contains information 122 * from the AP that affects modem initialization. 123 */ 124 struct ipa_init_modem_driver_req { 125 u8 platform_type_valid; 126 u32 platform_type; /* enum ipa_platform_type */ 127 128 /* Modem header table information. This defines the IPA shared 129 * memory in which the modem may insert header table entries. 130 */ 131 u8 hdr_tbl_info_valid; 132 struct ipa_mem_bounds hdr_tbl_info; 133 134 /* Routing table information. These define the location and maximum 135 * *index* (not byte) for the modem portion of non-hashable IPv4 and 136 * IPv6 routing tables. The start values are byte offsets relative 137 * to the start of IPA shared memory. 138 */ 139 u8 v4_route_tbl_info_valid; 140 struct ipa_mem_bounds v4_route_tbl_info; 141 u8 v6_route_tbl_info_valid; 142 struct ipa_mem_bounds v6_route_tbl_info; 143 144 /* Filter table information. These define the location of the 145 * non-hashable IPv4 and IPv6 filter tables. The start values are 146 * byte offsets relative to the start of IPA shared memory. 147 */ 148 u8 v4_filter_tbl_start_valid; 149 u32 v4_filter_tbl_start; 150 u8 v6_filter_tbl_start_valid; 151 u32 v6_filter_tbl_start; 152 153 /* Modem memory information. This defines the location and 154 * size of memory available for the modem to use. 155 */ 156 u8 modem_mem_info_valid; 157 struct ipa_mem_range modem_mem_info; 158 159 /* This defines the destination endpoint on the AP to which 160 * the modem driver can send control commands. Must be less 161 * than ipa_endpoint_max(). 162 */ 163 u8 ctrl_comm_dest_end_pt_valid; 164 u32 ctrl_comm_dest_end_pt; 165 166 /* This defines whether the modem should load the microcontroller 167 * or not. It is unnecessary to reload it if the modem is being 168 * restarted. 169 * 170 * NOTE: this field is named "is_ssr_bootup" elsewhere. 171 */ 172 u8 skip_uc_load_valid; 173 u8 skip_uc_load; 174 175 /* Processing context memory information. This defines the memory in 176 * which the modem may insert header processing context table entries. 177 */ 178 u8 hdr_proc_ctx_tbl_info_valid; 179 struct ipa_mem_bounds hdr_proc_ctx_tbl_info; 180 181 /* Compression command memory information. This defines the memory 182 * in which the modem may insert compression/decompression commands. 183 */ 184 u8 zip_tbl_info_valid; 185 struct ipa_mem_bounds zip_tbl_info; 186 187 /* Routing table information. These define the location and maximum 188 * *index* (not byte) for the modem portion of hashable IPv4 and IPv6 189 * routing tables (if supported by hardware). The start values are 190 * byte offsets relative to the start of IPA shared memory. 191 */ 192 u8 v4_hash_route_tbl_info_valid; 193 struct ipa_mem_bounds v4_hash_route_tbl_info; 194 u8 v6_hash_route_tbl_info_valid; 195 struct ipa_mem_bounds v6_hash_route_tbl_info; 196 197 /* Filter table information. These define the location and size 198 * of hashable IPv4 and IPv6 filter tables (if supported by hardware). 199 * The start values are byte offsets relative to the start of IPA 200 * shared memory. 201 */ 202 u8 v4_hash_filter_tbl_start_valid; 203 u32 v4_hash_filter_tbl_start; 204 u8 v6_hash_filter_tbl_start_valid; 205 u32 v6_hash_filter_tbl_start; 206 207 /* Statistics information. These define the locations of the 208 * first and last statistics sub-regions. (IPA v4.0 and above) 209 */ 210 u8 hw_stats_quota_base_addr_valid; 211 u32 hw_stats_quota_base_addr; 212 u8 hw_stats_quota_size_valid; 213 u32 hw_stats_quota_size; 214 u8 hw_stats_drop_base_addr_valid; 215 u32 hw_stats_drop_base_addr; 216 u8 hw_stats_drop_size_valid; 217 u32 hw_stats_drop_size; 218 }; 219 220 /* The response to a IPA_QMI_INIT_DRIVER request begins with a standard 221 * QMI response, but contains other information as well. Currently we 222 * simply wait for the INIT_DRIVER transaction to complete and 223 * ignore any other data that might be returned. 224 */ 225 struct ipa_init_modem_driver_rsp { 226 struct qmi_response_type_v01 rsp; 227 228 /* This defines the destination endpoint on the modem to which 229 * the AP driver can send control commands. Must be less than 230 * ipa_endpoint_max(). 231 */ 232 u8 ctrl_comm_dest_end_pt_valid; 233 u32 ctrl_comm_dest_end_pt; 234 235 /* This defines the default endpoint. The AP driver is not 236 * required to configure the hardware with this value. Must 237 * be less than ipa_endpoint_max(). 238 */ 239 u8 default_end_pt_valid; 240 u32 default_end_pt; 241 242 /* This defines whether a second handshake is required to complete 243 * initialization. 244 */ 245 u8 modem_driver_init_pending_valid; 246 u8 modem_driver_init_pending; 247 }; 248 249 /* Message structure definitions defined in "ipa_qmi_msg.c" */ 250 extern const struct qmi_elem_info ipa_indication_register_req_ei[]; 251 extern const struct qmi_elem_info ipa_indication_register_rsp_ei[]; 252 extern const struct qmi_elem_info ipa_driver_init_complete_req_ei[]; 253 extern const struct qmi_elem_info ipa_driver_init_complete_rsp_ei[]; 254 extern const struct qmi_elem_info ipa_init_complete_ind_ei[]; 255 extern const struct qmi_elem_info ipa_mem_bounds_ei[]; 256 extern const struct qmi_elem_info ipa_mem_array_ei[]; 257 extern const struct qmi_elem_info ipa_mem_range_ei[]; 258 extern const struct qmi_elem_info ipa_init_modem_driver_req_ei[]; 259 extern const struct qmi_elem_info ipa_init_modem_driver_rsp_ei[]; 260 261 #endif /* !_IPA_QMI_MSG_H_ */ 262
