1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright (c) 2019 - 2022 Beijing WangXun Technology Co., Ltd. */
3
4 #include <linux/ethtool.h>
5 #include <linux/iopoll.h>
6 #include <linux/pci.h>
7 #include <linux/phy.h>
8
9 #include "../libwx/wx_type.h"
10 #include "../libwx/wx_hw.h"
11 #include "ngbe_type.h"
12 #include "ngbe_mdio.h"
13
ngbe_phy_read_reg_internal(struct mii_bus * bus,int phy_addr,int regnum)14 static int ngbe_phy_read_reg_internal(struct mii_bus *bus, int phy_addr, int regnum)
15 {
16 struct wx *wx = bus->priv;
17
18 if (phy_addr != 0)
19 return 0xffff;
20 return (u16)rd32(wx, NGBE_PHY_CONFIG(regnum));
21 }
22
ngbe_phy_write_reg_internal(struct mii_bus * bus,int phy_addr,int regnum,u16 value)23 static int ngbe_phy_write_reg_internal(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
24 {
25 struct wx *wx = bus->priv;
26
27 if (phy_addr == 0)
28 wr32(wx, NGBE_PHY_CONFIG(regnum), value);
29 return 0;
30 }
31
ngbe_phy_read_reg_mdi_c22(struct mii_bus * bus,int phy_addr,int regnum)32 static int ngbe_phy_read_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum)
33 {
34 u32 command, val, device_type = 0;
35 struct wx *wx = bus->priv;
36 int ret;
37
38 wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF);
39 /* setup and write the address cycle command */
40 command = WX_MSCA_RA(regnum) |
41 WX_MSCA_PA(phy_addr) |
42 WX_MSCA_DA(device_type);
43 wr32(wx, WX_MSCA, command);
44 command = WX_MSCC_CMD(WX_MSCA_CMD_READ) |
45 WX_MSCC_BUSY |
46 WX_MDIO_CLK(6);
47 wr32(wx, WX_MSCC, command);
48
49 /* wait to complete */
50 ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
51 100000, false, wx, WX_MSCC);
52 if (ret) {
53 wx_err(wx, "Mdio read c22 command did not complete.\n");
54 return ret;
55 }
56
57 return (u16)rd32(wx, WX_MSCC);
58 }
59
ngbe_phy_write_reg_mdi_c22(struct mii_bus * bus,int phy_addr,int regnum,u16 value)60 static int ngbe_phy_write_reg_mdi_c22(struct mii_bus *bus, int phy_addr, int regnum, u16 value)
61 {
62 u32 command, val, device_type = 0;
63 struct wx *wx = bus->priv;
64 int ret;
65
66 wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0xF);
67 /* setup and write the address cycle command */
68 command = WX_MSCA_RA(regnum) |
69 WX_MSCA_PA(phy_addr) |
70 WX_MSCA_DA(device_type);
71 wr32(wx, WX_MSCA, command);
72 command = value |
73 WX_MSCC_CMD(WX_MSCA_CMD_WRITE) |
74 WX_MSCC_BUSY |
75 WX_MDIO_CLK(6);
76 wr32(wx, WX_MSCC, command);
77
78 /* wait to complete */
79 ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
80 100000, false, wx, WX_MSCC);
81 if (ret)
82 wx_err(wx, "Mdio write c22 command did not complete.\n");
83
84 return ret;
85 }
86
ngbe_phy_read_reg_mdi_c45(struct mii_bus * bus,int phy_addr,int devnum,int regnum)87 static int ngbe_phy_read_reg_mdi_c45(struct mii_bus *bus, int phy_addr, int devnum, int regnum)
88 {
89 struct wx *wx = bus->priv;
90 u32 val, command;
91 int ret;
92
93 wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0x0);
94 /* setup and write the address cycle command */
95 command = WX_MSCA_RA(regnum) |
96 WX_MSCA_PA(phy_addr) |
97 WX_MSCA_DA(devnum);
98 wr32(wx, WX_MSCA, command);
99 command = WX_MSCC_CMD(WX_MSCA_CMD_READ) |
100 WX_MSCC_BUSY |
101 WX_MDIO_CLK(6);
102 wr32(wx, WX_MSCC, command);
103
104 /* wait to complete */
105 ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
106 100000, false, wx, WX_MSCC);
107 if (ret) {
108 wx_err(wx, "Mdio read c45 command did not complete.\n");
109 return ret;
110 }
111
112 return (u16)rd32(wx, WX_MSCC);
113 }
114
ngbe_phy_write_reg_mdi_c45(struct mii_bus * bus,int phy_addr,int devnum,int regnum,u16 value)115 static int ngbe_phy_write_reg_mdi_c45(struct mii_bus *bus, int phy_addr,
116 int devnum, int regnum, u16 value)
117 {
118 struct wx *wx = bus->priv;
119 int ret, command;
120 u16 val;
121
122 wr32(wx, NGBE_MDIO_CLAUSE_SELECT, 0x0);
123 /* setup and write the address cycle command */
124 command = WX_MSCA_RA(regnum) |
125 WX_MSCA_PA(phy_addr) |
126 WX_MSCA_DA(devnum);
127 wr32(wx, WX_MSCA, command);
128 command = value |
129 WX_MSCC_CMD(WX_MSCA_CMD_WRITE) |
130 WX_MSCC_BUSY |
131 WX_MDIO_CLK(6);
132 wr32(wx, WX_MSCC, command);
133
134 /* wait to complete */
135 ret = read_poll_timeout(rd32, val, !(val & WX_MSCC_BUSY), 1000,
136 100000, false, wx, WX_MSCC);
137 if (ret)
138 wx_err(wx, "Mdio write c45 command did not complete.\n");
139
140 return ret;
141 }
142
ngbe_phy_read_reg_c22(struct mii_bus * bus,int phy_addr,int regnum)143 static int ngbe_phy_read_reg_c22(struct mii_bus *bus, int phy_addr, int regnum)
144 {
145 struct wx *wx = bus->priv;
146 u16 phy_data;
147
148 if (wx->mac_type == em_mac_type_mdi)
149 phy_data = ngbe_phy_read_reg_internal(bus, phy_addr, regnum);
150 else
151 phy_data = ngbe_phy_read_reg_mdi_c22(bus, phy_addr, regnum);
152
153 return phy_data;
154 }
155
ngbe_phy_write_reg_c22(struct mii_bus * bus,int phy_addr,int regnum,u16 value)156 static int ngbe_phy_write_reg_c22(struct mii_bus *bus, int phy_addr,
157 int regnum, u16 value)
158 {
159 struct wx *wx = bus->priv;
160 int ret;
161
162 if (wx->mac_type == em_mac_type_mdi)
163 ret = ngbe_phy_write_reg_internal(bus, phy_addr, regnum, value);
164 else
165 ret = ngbe_phy_write_reg_mdi_c22(bus, phy_addr, regnum, value);
166
167 return ret;
168 }
169
ngbe_handle_link_change(struct net_device * dev)170 static void ngbe_handle_link_change(struct net_device *dev)
171 {
172 struct wx *wx = netdev_priv(dev);
173 struct phy_device *phydev;
174 u32 lan_speed, reg;
175
176 phydev = wx->phydev;
177 if (!(wx->link != phydev->link ||
178 wx->speed != phydev->speed ||
179 wx->duplex != phydev->duplex))
180 return;
181
182 wx->link = phydev->link;
183 wx->speed = phydev->speed;
184 wx->duplex = phydev->duplex;
185 switch (phydev->speed) {
186 case SPEED_10:
187 lan_speed = 0;
188 break;
189 case SPEED_100:
190 lan_speed = 1;
191 break;
192 case SPEED_1000:
193 default:
194 lan_speed = 2;
195 break;
196 }
197 wr32m(wx, NGBE_CFG_LAN_SPEED, 0x3, lan_speed);
198
199 if (phydev->link) {
200 reg = rd32(wx, WX_MAC_TX_CFG);
201 reg &= ~WX_MAC_TX_CFG_SPEED_MASK;
202 reg |= WX_MAC_TX_CFG_SPEED_1G | WX_MAC_TX_CFG_TE;
203 wr32(wx, WX_MAC_TX_CFG, reg);
204 /* Re configure MAC RX */
205 reg = rd32(wx, WX_MAC_RX_CFG);
206 wr32(wx, WX_MAC_RX_CFG, reg);
207 wr32(wx, WX_MAC_PKT_FLT, WX_MAC_PKT_FLT_PR);
208 reg = rd32(wx, WX_MAC_WDG_TIMEOUT);
209 wr32(wx, WX_MAC_WDG_TIMEOUT, reg);
210 }
211 phy_print_status(phydev);
212 }
213
ngbe_phy_connect(struct wx * wx)214 int ngbe_phy_connect(struct wx *wx)
215 {
216 int ret;
217
218 ret = phy_connect_direct(wx->netdev,
219 wx->phydev,
220 ngbe_handle_link_change,
221 PHY_INTERFACE_MODE_RGMII_ID);
222 if (ret) {
223 wx_err(wx, "PHY connect failed.\n");
224 return ret;
225 }
226
227 return 0;
228 }
229
ngbe_phy_fixup(struct wx * wx)230 static void ngbe_phy_fixup(struct wx *wx)
231 {
232 struct phy_device *phydev = wx->phydev;
233 struct ethtool_eee eee;
234
235 phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_10baseT_Half_BIT);
236 phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_100baseT_Half_BIT);
237 phy_remove_link_mode(phydev, ETHTOOL_LINK_MODE_1000baseT_Half_BIT);
238
239 phydev->mac_managed_pm = true;
240 if (wx->mac_type != em_mac_type_mdi)
241 return;
242 /* disable EEE, internal phy does not support eee */
243 memset(&eee, 0, sizeof(eee));
244 phy_ethtool_set_eee(phydev, &eee);
245 }
246
ngbe_mdio_init(struct wx * wx)247 int ngbe_mdio_init(struct wx *wx)
248 {
249 struct pci_dev *pdev = wx->pdev;
250 struct mii_bus *mii_bus;
251 int ret;
252
253 mii_bus = devm_mdiobus_alloc(&pdev->dev);
254 if (!mii_bus)
255 return -ENOMEM;
256
257 mii_bus->name = "ngbe_mii_bus";
258 mii_bus->read = ngbe_phy_read_reg_c22;
259 mii_bus->write = ngbe_phy_write_reg_c22;
260 mii_bus->phy_mask = GENMASK(31, 4);
261 mii_bus->parent = &pdev->dev;
262 mii_bus->priv = wx;
263
264 if (wx->mac_type == em_mac_type_rgmii) {
265 mii_bus->read_c45 = ngbe_phy_read_reg_mdi_c45;
266 mii_bus->write_c45 = ngbe_phy_write_reg_mdi_c45;
267 }
268
269 snprintf(mii_bus->id, MII_BUS_ID_SIZE, "ngbe-%x", pci_dev_id(pdev));
270 ret = devm_mdiobus_register(&pdev->dev, mii_bus);
271 if (ret)
272 return ret;
273
274 wx->phydev = phy_find_first(mii_bus);
275 if (!wx->phydev)
276 return -ENODEV;
277
278 phy_attached_info(wx->phydev);
279 ngbe_phy_fixup(wx);
280
281 wx->link = 0;
282 wx->speed = 0;
283 wx->duplex = 0;
284
285 return 0;
286 }
287
