1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * ImgTec IR Decoder setup for NEC protocol.
4  *
5  * Copyright 2010-2014 Imagination Technologies Ltd.
6  */
7 
8 #include "img-ir-hw.h"
9 #include <linux/bitrev.h>
10 #include <linux/log2.h>
11 
12 /* Convert NEC data to a scancode */
img_ir_nec_scancode(int len,u64 raw,u64 enabled_protocols,struct img_ir_scancode_req * request)13 static int img_ir_nec_scancode(int len, u64 raw, u64 enabled_protocols,
14 			       struct img_ir_scancode_req *request)
15 {
16 	unsigned int addr, addr_inv, data, data_inv;
17 	/* a repeat code has no data */
18 	if (!len)
19 		return IMG_IR_REPEATCODE;
20 	if (len != 32)
21 		return -EINVAL;
22 	/* raw encoding: ddDDaaAA */
23 	addr     = (raw >>  0) & 0xff;
24 	addr_inv = (raw >>  8) & 0xff;
25 	data     = (raw >> 16) & 0xff;
26 	data_inv = (raw >> 24) & 0xff;
27 	if ((data_inv ^ data) != 0xff) {
28 		/* 32-bit NEC (used by Apple and TiVo remotes) */
29 		/* scan encoding: as transmitted, MSBit = first received bit */
30 		request->scancode = bitrev8(addr)     << 24 |
31 				bitrev8(addr_inv) << 16 |
32 				bitrev8(data)     <<  8 |
33 				bitrev8(data_inv);
34 		request->protocol = RC_PROTO_NEC32;
35 	} else if ((addr_inv ^ addr) != 0xff) {
36 		/* Extended NEC */
37 		/* scan encoding: AAaaDD */
38 		request->scancode = addr     << 16 |
39 				addr_inv <<  8 |
40 				data;
41 		request->protocol = RC_PROTO_NECX;
42 	} else {
43 		/* Normal NEC */
44 		/* scan encoding: AADD */
45 		request->scancode = addr << 8 |
46 				data;
47 		request->protocol = RC_PROTO_NEC;
48 	}
49 	return IMG_IR_SCANCODE;
50 }
51 
52 /* Convert NEC scancode to NEC data filter */
img_ir_nec_filter(const struct rc_scancode_filter * in,struct img_ir_filter * out,u64 protocols)53 static int img_ir_nec_filter(const struct rc_scancode_filter *in,
54 			     struct img_ir_filter *out, u64 protocols)
55 {
56 	unsigned int addr, addr_inv, data, data_inv;
57 	unsigned int addr_m, addr_inv_m, data_m, data_inv_m;
58 
59 	data       = in->data & 0xff;
60 	data_m     = in->mask & 0xff;
61 
62 	protocols &= RC_PROTO_BIT_NEC | RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32;
63 
64 	/*
65 	 * If only one bit is set, we were requested to do an exact
66 	 * protocol. This should be the case for wakeup filters; for
67 	 * normal filters, guess the protocol from the scancode.
68 	 */
69 	if (!is_power_of_2(protocols)) {
70 		if ((in->data | in->mask) & 0xff000000)
71 			protocols = RC_PROTO_BIT_NEC32;
72 		else if ((in->data | in->mask) & 0x00ff0000)
73 			protocols = RC_PROTO_BIT_NECX;
74 		else
75 			protocols = RC_PROTO_BIT_NEC;
76 	}
77 
78 	if (protocols == RC_PROTO_BIT_NEC32) {
79 		/* 32-bit NEC (used by Apple and TiVo remotes) */
80 		/* scan encoding: as transmitted, MSBit = first received bit */
81 		addr       = bitrev8(in->data >> 24);
82 		addr_m     = bitrev8(in->mask >> 24);
83 		addr_inv   = bitrev8(in->data >> 16);
84 		addr_inv_m = bitrev8(in->mask >> 16);
85 		data       = bitrev8(in->data >>  8);
86 		data_m     = bitrev8(in->mask >>  8);
87 		data_inv   = bitrev8(in->data >>  0);
88 		data_inv_m = bitrev8(in->mask >>  0);
89 	} else if (protocols == RC_PROTO_BIT_NECX) {
90 		/* Extended NEC */
91 		/* scan encoding AAaaDD */
92 		addr       = (in->data >> 16) & 0xff;
93 		addr_m     = (in->mask >> 16) & 0xff;
94 		addr_inv   = (in->data >>  8) & 0xff;
95 		addr_inv_m = (in->mask >>  8) & 0xff;
96 		data_inv   = data ^ 0xff;
97 		data_inv_m = data_m;
98 	} else {
99 		/* Normal NEC */
100 		/* scan encoding: AADD */
101 		addr       = (in->data >>  8) & 0xff;
102 		addr_m     = (in->mask >>  8) & 0xff;
103 		addr_inv   = addr ^ 0xff;
104 		addr_inv_m = addr_m;
105 		data_inv   = data ^ 0xff;
106 		data_inv_m = data_m;
107 	}
108 
109 	/* raw encoding: ddDDaaAA */
110 	out->data = data_inv << 24 |
111 		    data     << 16 |
112 		    addr_inv <<  8 |
113 		    addr;
114 	out->mask = data_inv_m << 24 |
115 		    data_m     << 16 |
116 		    addr_inv_m <<  8 |
117 		    addr_m;
118 	return 0;
119 }
120 
121 /*
122  * NEC decoder
123  * See also http://www.sbprojects.com/knowledge/ir/nec.php
124  *        http://wiki.altium.com/display/ADOH/NEC+Infrared+Transmission+Protocol
125  */
126 struct img_ir_decoder img_ir_nec = {
127 	.type = RC_PROTO_BIT_NEC | RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32,
128 	.control = {
129 		.decoden = 1,
130 		.code_type = IMG_IR_CODETYPE_PULSEDIST,
131 	},
132 	/* main timings */
133 	.unit = 562500, /* 562.5 us */
134 	.timings = {
135 		/* leader symbol */
136 		.ldr = {
137 			.pulse = { 16	/* 9ms */ },
138 			.space = { 8	/* 4.5ms */ },
139 		},
140 		/* 0 symbol */
141 		.s00 = {
142 			.pulse = { 1	/* 562.5 us */ },
143 			.space = { 1	/* 562.5 us */ },
144 		},
145 		/* 1 symbol */
146 		.s01 = {
147 			.pulse = { 1	/* 562.5 us */ },
148 			.space = { 3	/* 1687.5 us */ },
149 		},
150 		/* free time */
151 		.ft = {
152 			.minlen = 32,
153 			.maxlen = 32,
154 			.ft_min = 10,	/* 5.625 ms */
155 		},
156 	},
157 	/* repeat codes */
158 	.repeat = 108,			/* 108 ms */
159 	.rtimings = {
160 		/* leader symbol */
161 		.ldr = {
162 			.space = { 4	/* 2.25 ms */ },
163 		},
164 		/* free time */
165 		.ft = {
166 			.minlen = 0,	/* repeat code has no data */
167 			.maxlen = 0,
168 		},
169 	},
170 	/* scancode logic */
171 	.scancode = img_ir_nec_scancode,
172 	.filter = img_ir_nec_filter,
173 };
174