1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * Copyright (C) 2005-2006 Micronas USA Inc.
4 */
5
6 #include <linux/module.h>
7 #include <linux/init.h>
8 #include <linux/i2c.h>
9 #include <linux/videodev2.h>
10 #include <linux/ioctl.h>
11 #include <media/v4l2-device.h>
12 #include <media/v4l2-ctrls.h>
13 #include <linux/slab.h>
14
15 MODULE_DESCRIPTION("TW9903 I2C subdev driver");
16 MODULE_LICENSE("GPL v2");
17
18 /*
19 * This driver is based on the wis-tw9903.c source that was in
20 * drivers/staging/media/go7007. That source had commented out code for
21 * saturation and scaling (neither seemed to work). If anyone ever gets
22 * hardware to test this driver, then that code might be useful to look at.
23 * You need to get the kernel sources of, say, kernel 3.8 where that
24 * wis-tw9903 driver is still present.
25 */
26
27 struct tw9903 {
28 struct v4l2_subdev sd;
29 struct v4l2_ctrl_handler hdl;
30 v4l2_std_id norm;
31 };
32
to_state(struct v4l2_subdev * sd)33 static inline struct tw9903 *to_state(struct v4l2_subdev *sd)
34 {
35 return container_of(sd, struct tw9903, sd);
36 }
37
38 static const u8 initial_registers[] = {
39 0x02, 0x44, /* input 1, composite */
40 0x03, 0x92, /* correct digital format */
41 0x04, 0x00,
42 0x05, 0x80, /* or 0x00 for PAL */
43 0x06, 0x40, /* second internal current reference */
44 0x07, 0x02, /* window */
45 0x08, 0x14, /* window */
46 0x09, 0xf0, /* window */
47 0x0a, 0x81, /* window */
48 0x0b, 0xd0, /* window */
49 0x0c, 0x8c,
50 0x0d, 0x00, /* scaling */
51 0x0e, 0x11, /* scaling */
52 0x0f, 0x00, /* scaling */
53 0x10, 0x00, /* brightness */
54 0x11, 0x60, /* contrast */
55 0x12, 0x01, /* sharpness */
56 0x13, 0x7f, /* U gain */
57 0x14, 0x5a, /* V gain */
58 0x15, 0x00, /* hue */
59 0x16, 0xc3, /* sharpness */
60 0x18, 0x00,
61 0x19, 0x58, /* vbi */
62 0x1a, 0x80,
63 0x1c, 0x0f, /* video norm */
64 0x1d, 0x7f, /* video norm */
65 0x20, 0xa0, /* clamping gain (working 0x50) */
66 0x21, 0x22,
67 0x22, 0xf0,
68 0x23, 0xfe,
69 0x24, 0x3c,
70 0x25, 0x38,
71 0x26, 0x44,
72 0x27, 0x20,
73 0x28, 0x00,
74 0x29, 0x15,
75 0x2a, 0xa0,
76 0x2b, 0x44,
77 0x2c, 0x37,
78 0x2d, 0x00,
79 0x2e, 0xa5, /* burst PLL control (working: a9) */
80 0x2f, 0xe0, /* 0xea is blue test frame -- 0xe0 for normal */
81 0x31, 0x00,
82 0x33, 0x22,
83 0x34, 0x11,
84 0x35, 0x35,
85 0x3b, 0x05,
86 0x06, 0xc0, /* reset device */
87 0x00, 0x00, /* Terminator (reg 0x00 is read-only) */
88 };
89
write_reg(struct v4l2_subdev * sd,u8 reg,u8 value)90 static int write_reg(struct v4l2_subdev *sd, u8 reg, u8 value)
91 {
92 struct i2c_client *client = v4l2_get_subdevdata(sd);
93
94 return i2c_smbus_write_byte_data(client, reg, value);
95 }
96
write_regs(struct v4l2_subdev * sd,const u8 * regs)97 static int write_regs(struct v4l2_subdev *sd, const u8 *regs)
98 {
99 int i;
100
101 for (i = 0; regs[i] != 0x00; i += 2)
102 if (write_reg(sd, regs[i], regs[i + 1]) < 0)
103 return -1;
104 return 0;
105 }
106
tw9903_s_video_routing(struct v4l2_subdev * sd,u32 input,u32 output,u32 config)107 static int tw9903_s_video_routing(struct v4l2_subdev *sd, u32 input,
108 u32 output, u32 config)
109 {
110 write_reg(sd, 0x02, 0x40 | (input << 1));
111 return 0;
112 }
113
tw9903_s_std(struct v4l2_subdev * sd,v4l2_std_id norm)114 static int tw9903_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
115 {
116 struct tw9903 *dec = to_state(sd);
117 bool is_60hz = norm & V4L2_STD_525_60;
118 static const u8 config_60hz[] = {
119 0x05, 0x80,
120 0x07, 0x02,
121 0x08, 0x14,
122 0x09, 0xf0,
123 0, 0,
124 };
125 static const u8 config_50hz[] = {
126 0x05, 0x00,
127 0x07, 0x12,
128 0x08, 0x18,
129 0x09, 0x20,
130 0, 0,
131 };
132
133 write_regs(sd, is_60hz ? config_60hz : config_50hz);
134 dec->norm = norm;
135 return 0;
136 }
137
138
tw9903_s_ctrl(struct v4l2_ctrl * ctrl)139 static int tw9903_s_ctrl(struct v4l2_ctrl *ctrl)
140 {
141 struct tw9903 *dec = container_of(ctrl->handler, struct tw9903, hdl);
142 struct v4l2_subdev *sd = &dec->sd;
143
144 switch (ctrl->id) {
145 case V4L2_CID_BRIGHTNESS:
146 write_reg(sd, 0x10, ctrl->val);
147 break;
148 case V4L2_CID_CONTRAST:
149 write_reg(sd, 0x11, ctrl->val);
150 break;
151 case V4L2_CID_HUE:
152 write_reg(sd, 0x15, ctrl->val);
153 break;
154 default:
155 return -EINVAL;
156 }
157 return 0;
158 }
159
tw9903_log_status(struct v4l2_subdev * sd)160 static int tw9903_log_status(struct v4l2_subdev *sd)
161 {
162 struct tw9903 *dec = to_state(sd);
163 bool is_60hz = dec->norm & V4L2_STD_525_60;
164
165 v4l2_info(sd, "Standard: %d Hz\n", is_60hz ? 60 : 50);
166 v4l2_ctrl_subdev_log_status(sd);
167 return 0;
168 }
169
170 /* --------------------------------------------------------------------------*/
171
172 static const struct v4l2_ctrl_ops tw9903_ctrl_ops = {
173 .s_ctrl = tw9903_s_ctrl,
174 };
175
176 static const struct v4l2_subdev_core_ops tw9903_core_ops = {
177 .log_status = tw9903_log_status,
178 };
179
180 static const struct v4l2_subdev_video_ops tw9903_video_ops = {
181 .s_std = tw9903_s_std,
182 .s_routing = tw9903_s_video_routing,
183 };
184
185 static const struct v4l2_subdev_ops tw9903_ops = {
186 .core = &tw9903_core_ops,
187 .video = &tw9903_video_ops,
188 };
189
190 /* --------------------------------------------------------------------------*/
191
tw9903_probe(struct i2c_client * client)192 static int tw9903_probe(struct i2c_client *client)
193 {
194 struct tw9903 *dec;
195 struct v4l2_subdev *sd;
196 struct v4l2_ctrl_handler *hdl;
197
198 /* Check if the adapter supports the needed features */
199 if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
200 return -EIO;
201
202 v4l_info(client, "chip found @ 0x%02x (%s)\n",
203 client->addr << 1, client->adapter->name);
204
205 dec = devm_kzalloc(&client->dev, sizeof(*dec), GFP_KERNEL);
206 if (dec == NULL)
207 return -ENOMEM;
208 sd = &dec->sd;
209 v4l2_i2c_subdev_init(sd, client, &tw9903_ops);
210 hdl = &dec->hdl;
211 v4l2_ctrl_handler_init(hdl, 4);
212 v4l2_ctrl_new_std(hdl, &tw9903_ctrl_ops,
213 V4L2_CID_BRIGHTNESS, -128, 127, 1, 0);
214 v4l2_ctrl_new_std(hdl, &tw9903_ctrl_ops,
215 V4L2_CID_CONTRAST, 0, 255, 1, 0x60);
216 v4l2_ctrl_new_std(hdl, &tw9903_ctrl_ops,
217 V4L2_CID_HUE, -128, 127, 1, 0);
218 sd->ctrl_handler = hdl;
219 if (hdl->error) {
220 int err = hdl->error;
221
222 v4l2_ctrl_handler_free(hdl);
223 return err;
224 }
225
226 /* Initialize tw9903 */
227 dec->norm = V4L2_STD_NTSC;
228
229 if (write_regs(sd, initial_registers) < 0) {
230 v4l2_err(client, "error initializing TW9903\n");
231 return -EINVAL;
232 }
233
234 return 0;
235 }
236
tw9903_remove(struct i2c_client * client)237 static void tw9903_remove(struct i2c_client *client)
238 {
239 struct v4l2_subdev *sd = i2c_get_clientdata(client);
240
241 v4l2_device_unregister_subdev(sd);
242 v4l2_ctrl_handler_free(&to_state(sd)->hdl);
243 }
244
245 /* ----------------------------------------------------------------------- */
246
247 static const struct i2c_device_id tw9903_id[] = {
248 { "tw9903", 0 },
249 { }
250 };
251 MODULE_DEVICE_TABLE(i2c, tw9903_id);
252
253 static struct i2c_driver tw9903_driver = {
254 .driver = {
255 .name = "tw9903",
256 },
257 .probe = tw9903_probe,
258 .remove = tw9903_remove,
259 .id_table = tw9903_id,
260 };
261 module_i2c_driver(tw9903_driver);
262
