1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * PlayStation 1/2 joypads via SPI interface Driver
4  *
5  * Copyright (C) 2017 Tomohiro Yoshidomi <sylph23k@gmail.com>
6  *
7  * PlayStation 1/2 joypad's plug (not socket)
8  *  123 456 789
9  * (...|...|...)
10  *
11  * 1: DAT -> MISO (pullup with 1k owm to 3.3V)
12  * 2: CMD -> MOSI
13  * 3: 9V (for motor, if not use N.C.)
14  * 4: GND
15  * 5: 3.3V
16  * 6: Attention -> CS(SS)
17  * 7: SCK -> SCK
18  * 8: N.C.
19  * 9: ACK -> N.C.
20  */
21 
22 #include <linux/kernel.h>
23 #include <linux/device.h>
24 #include <linux/input.h>
25 #include <linux/module.h>
26 #include <linux/spi/spi.h>
27 #include <linux/types.h>
28 #include <linux/pm.h>
29 #include <linux/pm_runtime.h>
30 
31 #define REVERSE_BIT(x) ((((x) & 0x80) >> 7) | (((x) & 0x40) >> 5) | \
32 	(((x) & 0x20) >> 3) | (((x) & 0x10) >> 1) | (((x) & 0x08) << 1) | \
33 	(((x) & 0x04) << 3) | (((x) & 0x02) << 5) | (((x) & 0x01) << 7))
34 
35 /* PlayStation 1/2 joypad command and response are LSBFIRST. */
36 
37 /*
38  *	0x01, 0x42, 0x00, 0x00, 0x00,
39  *	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
40  *	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
41  */
42 static const u8 PSX_CMD_POLL[] = {
43 	0x80, 0x42, 0x00, 0x00, 0x00,
44 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
45 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
46 };
47 
48 #ifdef CONFIG_JOYSTICK_PSXPAD_SPI_FF
49 /*	0x01, 0x43, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00 */
50 static const u8 PSX_CMD_ENTER_CFG[] = {
51 	0x80, 0xC2, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00
52 };
53 /*	0x01, 0x43, 0x00, 0x00, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A */
54 static const u8 PSX_CMD_EXIT_CFG[] = {
55 	0x80, 0xC2, 0x00, 0x00, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A
56 };
57 /*	0x01, 0x4D, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xFF */
58 static const u8 PSX_CMD_ENABLE_MOTOR[]	= {
59 	0x80, 0xB2, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0xFF, 0xFF
60 };
61 #endif /* CONFIG_JOYSTICK_PSXPAD_SPI_FF */
62 
63 struct psxpad {
64 	struct spi_device *spi;
65 	struct input_dev *idev;
66 	char phys[0x20];
67 	bool motor1enable;
68 	bool motor2enable;
69 	u8 motor1level;
70 	u8 motor2level;
71 	u8 sendbuf[0x20] ____cacheline_aligned;
72 	u8 response[sizeof(PSX_CMD_POLL)] ____cacheline_aligned;
73 };
74 
psxpad_command(struct psxpad * pad,const u8 sendcmdlen)75 static int psxpad_command(struct psxpad *pad, const u8 sendcmdlen)
76 {
77 	struct spi_transfer xfers = {
78 		.tx_buf		= pad->sendbuf,
79 		.rx_buf		= pad->response,
80 		.len		= sendcmdlen,
81 	};
82 	int err;
83 
84 	err = spi_sync_transfer(pad->spi, &xfers, 1);
85 	if (err) {
86 		dev_err(&pad->spi->dev,
87 			"%s: failed to SPI xfers mode: %d\n",
88 			__func__, err);
89 		return err;
90 	}
91 
92 	return 0;
93 }
94 
95 #ifdef CONFIG_JOYSTICK_PSXPAD_SPI_FF
psxpad_control_motor(struct psxpad * pad,bool motor1enable,bool motor2enable)96 static void psxpad_control_motor(struct psxpad *pad,
97 				 bool motor1enable, bool motor2enable)
98 {
99 	int err;
100 
101 	pad->motor1enable = motor1enable;
102 	pad->motor2enable = motor2enable;
103 
104 	memcpy(pad->sendbuf, PSX_CMD_ENTER_CFG, sizeof(PSX_CMD_ENTER_CFG));
105 	err = psxpad_command(pad, sizeof(PSX_CMD_ENTER_CFG));
106 	if (err) {
107 		dev_err(&pad->spi->dev,
108 			"%s: failed to enter config mode: %d\n",
109 			__func__, err);
110 		return;
111 	}
112 
113 	memcpy(pad->sendbuf, PSX_CMD_ENABLE_MOTOR,
114 	       sizeof(PSX_CMD_ENABLE_MOTOR));
115 	pad->sendbuf[3] = pad->motor1enable ? 0x00 : 0xFF;
116 	pad->sendbuf[4] = pad->motor2enable ? 0x80 : 0xFF;
117 	err = psxpad_command(pad, sizeof(PSX_CMD_ENABLE_MOTOR));
118 	if (err) {
119 		dev_err(&pad->spi->dev,
120 			"%s: failed to enable motor mode: %d\n",
121 			__func__, err);
122 		return;
123 	}
124 
125 	memcpy(pad->sendbuf, PSX_CMD_EXIT_CFG, sizeof(PSX_CMD_EXIT_CFG));
126 	err = psxpad_command(pad, sizeof(PSX_CMD_EXIT_CFG));
127 	if (err) {
128 		dev_err(&pad->spi->dev,
129 			"%s: failed to exit config mode: %d\n",
130 			__func__, err);
131 		return;
132 	}
133 }
134 
psxpad_set_motor_level(struct psxpad * pad,u8 motor1level,u8 motor2level)135 static void psxpad_set_motor_level(struct psxpad *pad,
136 				   u8 motor1level, u8 motor2level)
137 {
138 	pad->motor1level = motor1level ? 0xFF : 0x00;
139 	pad->motor2level = REVERSE_BIT(motor2level);
140 }
141 
psxpad_spi_play_effect(struct input_dev * idev,void * data,struct ff_effect * effect)142 static int psxpad_spi_play_effect(struct input_dev *idev,
143 				  void *data, struct ff_effect *effect)
144 {
145 	struct psxpad *pad = input_get_drvdata(idev);
146 
147 	switch (effect->type) {
148 	case FF_RUMBLE:
149 		psxpad_set_motor_level(pad,
150 			(effect->u.rumble.weak_magnitude >> 8) & 0xFFU,
151 			(effect->u.rumble.strong_magnitude >> 8) & 0xFFU);
152 		break;
153 	}
154 
155 	return 0;
156 }
157 
psxpad_spi_init_ff(struct psxpad * pad)158 static int psxpad_spi_init_ff(struct psxpad *pad)
159 {
160 	int err;
161 
162 	input_set_capability(pad->idev, EV_FF, FF_RUMBLE);
163 
164 	err = input_ff_create_memless(pad->idev, NULL, psxpad_spi_play_effect);
165 	if (err) {
166 		dev_err(&pad->spi->dev,
167 			"input_ff_create_memless() failed: %d\n", err);
168 		return err;
169 	}
170 
171 	return 0;
172 }
173 
174 #else	/* CONFIG_JOYSTICK_PSXPAD_SPI_FF */
175 
psxpad_control_motor(struct psxpad * pad,bool motor1enable,bool motor2enable)176 static void psxpad_control_motor(struct psxpad *pad,
177 				 bool motor1enable, bool motor2enable)
178 {
179 }
180 
psxpad_set_motor_level(struct psxpad * pad,u8 motor1level,u8 motor2level)181 static void psxpad_set_motor_level(struct psxpad *pad,
182 				   u8 motor1level, u8 motor2level)
183 {
184 }
185 
psxpad_spi_init_ff(struct psxpad * pad)186 static inline int psxpad_spi_init_ff(struct psxpad *pad)
187 {
188 	return 0;
189 }
190 #endif	/* CONFIG_JOYSTICK_PSXPAD_SPI_FF */
191 
psxpad_spi_poll_open(struct input_dev * input)192 static int psxpad_spi_poll_open(struct input_dev *input)
193 {
194 	struct psxpad *pad = input_get_drvdata(input);
195 
196 	pm_runtime_get_sync(&pad->spi->dev);
197 
198 	return 0;
199 }
200 
psxpad_spi_poll_close(struct input_dev * input)201 static void psxpad_spi_poll_close(struct input_dev *input)
202 {
203 	struct psxpad *pad = input_get_drvdata(input);
204 
205 	pm_runtime_put_sync(&pad->spi->dev);
206 }
207 
psxpad_spi_poll(struct input_dev * input)208 static void psxpad_spi_poll(struct input_dev *input)
209 {
210 	struct psxpad *pad = input_get_drvdata(input);
211 	u8 b_rsp3, b_rsp4;
212 	int err;
213 
214 	psxpad_control_motor(pad, true, true);
215 
216 	memcpy(pad->sendbuf, PSX_CMD_POLL, sizeof(PSX_CMD_POLL));
217 	pad->sendbuf[3] = pad->motor1enable ? pad->motor1level : 0x00;
218 	pad->sendbuf[4] = pad->motor2enable ? pad->motor2level : 0x00;
219 	err = psxpad_command(pad, sizeof(PSX_CMD_POLL));
220 	if (err) {
221 		dev_err(&pad->spi->dev,
222 			"%s: poll command failed mode: %d\n", __func__, err);
223 		return;
224 	}
225 
226 	switch (pad->response[1]) {
227 	case 0xCE:	/* 0x73 : analog 1 */
228 		/* button data is inverted */
229 		b_rsp3 = ~pad->response[3];
230 		b_rsp4 = ~pad->response[4];
231 
232 		input_report_abs(input, ABS_X, REVERSE_BIT(pad->response[7]));
233 		input_report_abs(input, ABS_Y, REVERSE_BIT(pad->response[8]));
234 		input_report_abs(input, ABS_RX, REVERSE_BIT(pad->response[5]));
235 		input_report_abs(input, ABS_RY, REVERSE_BIT(pad->response[6]));
236 		input_report_key(input, BTN_DPAD_UP, b_rsp3 & BIT(3));
237 		input_report_key(input, BTN_DPAD_DOWN, b_rsp3 & BIT(1));
238 		input_report_key(input, BTN_DPAD_LEFT, b_rsp3 & BIT(0));
239 		input_report_key(input, BTN_DPAD_RIGHT, b_rsp3 & BIT(2));
240 		input_report_key(input, BTN_X, b_rsp4 & BIT(3));
241 		input_report_key(input, BTN_A, b_rsp4 & BIT(2));
242 		input_report_key(input, BTN_B, b_rsp4 & BIT(1));
243 		input_report_key(input, BTN_Y, b_rsp4 & BIT(0));
244 		input_report_key(input, BTN_TL, b_rsp4 & BIT(5));
245 		input_report_key(input, BTN_TR, b_rsp4 & BIT(4));
246 		input_report_key(input, BTN_TL2, b_rsp4 & BIT(7));
247 		input_report_key(input, BTN_TR2, b_rsp4 & BIT(6));
248 		input_report_key(input, BTN_THUMBL, b_rsp3 & BIT(6));
249 		input_report_key(input, BTN_THUMBR, b_rsp3 & BIT(5));
250 		input_report_key(input, BTN_SELECT, b_rsp3 & BIT(7));
251 		input_report_key(input, BTN_START, b_rsp3 & BIT(4));
252 		break;
253 
254 	case 0x82:	/* 0x41 : digital */
255 		/* button data is inverted */
256 		b_rsp3 = ~pad->response[3];
257 		b_rsp4 = ~pad->response[4];
258 
259 		input_report_abs(input, ABS_X, 0x80);
260 		input_report_abs(input, ABS_Y, 0x80);
261 		input_report_abs(input, ABS_RX, 0x80);
262 		input_report_abs(input, ABS_RY, 0x80);
263 		input_report_key(input, BTN_DPAD_UP, b_rsp3 & BIT(3));
264 		input_report_key(input, BTN_DPAD_DOWN, b_rsp3 & BIT(1));
265 		input_report_key(input, BTN_DPAD_LEFT, b_rsp3 & BIT(0));
266 		input_report_key(input, BTN_DPAD_RIGHT, b_rsp3 & BIT(2));
267 		input_report_key(input, BTN_X, b_rsp4 & BIT(3));
268 		input_report_key(input, BTN_A, b_rsp4 & BIT(2));
269 		input_report_key(input, BTN_B, b_rsp4 & BIT(1));
270 		input_report_key(input, BTN_Y, b_rsp4 & BIT(0));
271 		input_report_key(input, BTN_TL, b_rsp4 & BIT(5));
272 		input_report_key(input, BTN_TR, b_rsp4 & BIT(4));
273 		input_report_key(input, BTN_TL2, b_rsp4 & BIT(7));
274 		input_report_key(input, BTN_TR2, b_rsp4 & BIT(6));
275 		input_report_key(input, BTN_THUMBL, false);
276 		input_report_key(input, BTN_THUMBR, false);
277 		input_report_key(input, BTN_SELECT, b_rsp3 & BIT(7));
278 		input_report_key(input, BTN_START, b_rsp3 & BIT(4));
279 		break;
280 	}
281 
282 	input_sync(input);
283 }
284 
psxpad_spi_probe(struct spi_device * spi)285 static int psxpad_spi_probe(struct spi_device *spi)
286 {
287 	struct psxpad *pad;
288 	struct input_dev *idev;
289 	int err;
290 
291 	pad = devm_kzalloc(&spi->dev, sizeof(struct psxpad), GFP_KERNEL);
292 	if (!pad)
293 		return -ENOMEM;
294 
295 	idev = devm_input_allocate_device(&spi->dev);
296 	if (!idev) {
297 		dev_err(&spi->dev, "failed to allocate input device\n");
298 		return -ENOMEM;
299 	}
300 
301 	/* input poll device settings */
302 	pad->idev = idev;
303 	pad->spi = spi;
304 
305 	/* input device settings */
306 	input_set_drvdata(idev, pad);
307 
308 	idev->name = "PlayStation 1/2 joypad";
309 	snprintf(pad->phys, sizeof(pad->phys), "%s/input", dev_name(&spi->dev));
310 	idev->id.bustype = BUS_SPI;
311 
312 	idev->open = psxpad_spi_poll_open;
313 	idev->close = psxpad_spi_poll_close;
314 
315 	/* key/value map settings */
316 	input_set_abs_params(idev, ABS_X, 0, 255, 0, 0);
317 	input_set_abs_params(idev, ABS_Y, 0, 255, 0, 0);
318 	input_set_abs_params(idev, ABS_RX, 0, 255, 0, 0);
319 	input_set_abs_params(idev, ABS_RY, 0, 255, 0, 0);
320 	input_set_capability(idev, EV_KEY, BTN_DPAD_UP);
321 	input_set_capability(idev, EV_KEY, BTN_DPAD_DOWN);
322 	input_set_capability(idev, EV_KEY, BTN_DPAD_LEFT);
323 	input_set_capability(idev, EV_KEY, BTN_DPAD_RIGHT);
324 	input_set_capability(idev, EV_KEY, BTN_A);
325 	input_set_capability(idev, EV_KEY, BTN_B);
326 	input_set_capability(idev, EV_KEY, BTN_X);
327 	input_set_capability(idev, EV_KEY, BTN_Y);
328 	input_set_capability(idev, EV_KEY, BTN_TL);
329 	input_set_capability(idev, EV_KEY, BTN_TR);
330 	input_set_capability(idev, EV_KEY, BTN_TL2);
331 	input_set_capability(idev, EV_KEY, BTN_TR2);
332 	input_set_capability(idev, EV_KEY, BTN_THUMBL);
333 	input_set_capability(idev, EV_KEY, BTN_THUMBR);
334 	input_set_capability(idev, EV_KEY, BTN_SELECT);
335 	input_set_capability(idev, EV_KEY, BTN_START);
336 
337 	err = psxpad_spi_init_ff(pad);
338 	if (err)
339 		return err;
340 
341 	/* SPI settings */
342 	spi->mode = SPI_MODE_3;
343 	spi->bits_per_word = 8;
344 	/* (PlayStation 1/2 joypad might be possible works 250kHz/500kHz) */
345 	spi->master->min_speed_hz = 125000;
346 	spi->master->max_speed_hz = 125000;
347 	spi_setup(spi);
348 
349 	/* pad settings */
350 	psxpad_set_motor_level(pad, 0, 0);
351 
352 
353 	err = input_setup_polling(idev, psxpad_spi_poll);
354 	if (err) {
355 		dev_err(&spi->dev, "failed to set up polling: %d\n", err);
356 		return err;
357 	}
358 
359 	/* poll interval is about 60fps */
360 	input_set_poll_interval(idev, 16);
361 	input_set_min_poll_interval(idev, 8);
362 	input_set_max_poll_interval(idev, 32);
363 
364 	/* register input poll device */
365 	err = input_register_device(idev);
366 	if (err) {
367 		dev_err(&spi->dev,
368 			"failed to register input device: %d\n", err);
369 		return err;
370 	}
371 
372 	pm_runtime_enable(&spi->dev);
373 
374 	return 0;
375 }
376 
psxpad_spi_suspend(struct device * dev)377 static int psxpad_spi_suspend(struct device *dev)
378 {
379 	struct spi_device *spi = to_spi_device(dev);
380 	struct psxpad *pad = spi_get_drvdata(spi);
381 
382 	psxpad_set_motor_level(pad, 0, 0);
383 
384 	return 0;
385 }
386 
387 static DEFINE_SIMPLE_DEV_PM_OPS(psxpad_spi_pm, psxpad_spi_suspend, NULL);
388 
389 static const struct spi_device_id psxpad_spi_id[] = {
390 	{ "psxpad-spi", 0 },
391 	{ }
392 };
393 MODULE_DEVICE_TABLE(spi, psxpad_spi_id);
394 
395 static struct spi_driver psxpad_spi_driver = {
396 	.driver = {
397 		.name = "psxpad-spi",
398 		.pm = pm_sleep_ptr(&psxpad_spi_pm),
399 	},
400 	.id_table = psxpad_spi_id,
401 	.probe   = psxpad_spi_probe,
402 };
403 
404 module_spi_driver(psxpad_spi_driver);
405 
406 MODULE_AUTHOR("Tomohiro Yoshidomi <sylph23k@gmail.com>");
407 MODULE_DESCRIPTION("PlayStation 1/2 joypads via SPI interface Driver");
408 MODULE_LICENSE("GPL");
409